What to Do If Your Car Gets Scratched While Parked in the Residential Area?

1 Answers
Caroline
07/25/25 7:10am
After your vehicle is scratched, try to locate the person responsible for the damage to claim compensation. If the responsible party cannot be found, learn from the experience and try to park your car in an area covered by surveillance cameras. Here are some solutions to prevent car scratches: 1. Park as close to the side as possible, avoiding the middle position: Generally, parking lots are designed with designated spaces for 2-3 cars. Indoor parking lots often have concrete dividers. Parking in the middle increases the risk of scratches from both sides. Parking near the edge and leaving space for vehicles in the middle can minimize scratches. 2. Leave enough space for neighboring cars to open their doors: When parking side by side with another car, maintaining a proper horizontal distance is crucial. If you can't park far apart, park as close as possible—within 60 cm. This makes the other driver more cautious when opening their door. Conversely, a 1-meter distance is the most dangerous, as it allows the door to open at its widest angle, causing more significant damage due to higher speed and force. 3. Park your car as far inside the parking space as possible: The closer you park to the driving lane, the higher the chance of scratches. Always park at the innermost part of the parking space to effectively avoid scratches and even deter theft, as it makes it harder to access the trunk. 4. Avoid parking under windows or balconies: Parking under windows increases the risk of damage from falling objects. Always avoid these areas when parking to stay on the safe side.
Was this review help?
8
2
Share
More Forum Discussions

How Many Times Can You Schedule the Subject One Test?

There is no limit to the number of times you can schedule the Subject One test. It is recommended to select multiple test sessions when scheduling to increase the chances of successful scheduling. The system will prioritize scheduling based on the applicant's business acceptance time, the time of the last test taken, and the time of the last canceled test appointment, in chronological order. After successfully scheduling the Subject One test, you should bring valid identification to the scheduled time and test center to take the exam. If you fail to attend the exam on time, the test result will be marked as a failure. If you need to cancel the appointment for any reason, you must do so at least one day in advance. If the cancellation is successful, the test slot will no longer be reserved, and you will need to reschedule the test to participate again.
11
2
Share

Where is the USB port of the New Bora?

The USB port of the New Bora is located in the center console. The USB port inside the New Bora is designed for audio data transmission, so the interface current is only 5V/0.5A. Below is some relevant information about the New Bora: 1. Power: Equipped with a 1.4TSI engine featuring TSI technology with turbocharging and gasoline direct injection, fuel is directly injected into the cylinder for full combustion, resulting in more direct and efficient power conversion. Within a wide rpm range of 1750-3500 rpm, the maximum torque output reaches 220N·m. 2. Configuration: Includes cruise control GRA, one-touch anti-pinch power windows for all four doors, rain-sensing silent frameless wipers, a three-spoke leather multifunction steering wheel, and more.
4
5
Share

How to Disassemble a Steel Mate Car Remote?

Steel Mate car remote disassembly method: First, locate a small gap on the Steel Mate remote, then simply pry it open. There are various types of Steel Mate remotes, and the disassembly methods differ accordingly. For example, the Mars Man 6031 requires pushing open the back cover of the remote and then pulling it apart. Steps to replace the battery in a Steel Mate car remote: 1. Remove the operation hole cover of the Steel Mate car alarm remote; 2. Pry open the exposed battery cover operation hole; 3. Pull up the lifted battery cover with your hand; 4. Remove the exposed internal button battery; 5. Install a new battery; 6. Replace the battery cover; 7. Reattach the operation hole cover to complete the process.
18
2
Share

What Components Make Up the Cooling System

Engine cooling systems can be divided into two types: water-cooled and air-cooled. Modern vehicles widely adopt water-cooled systems, which mainly consist of the following components: 1. Radiator and cooling fan. 2. Water pump and thermostat. 3. Water jacket and hoses. 4. Coolant expansion tank, coolant temperature gauge, coolant temperature sensor, etc. Below are the functions of an automotive cooling system: 1. Maintain the engine within an appropriate temperature range under all operating conditions. 2. Dissipate heat transferred to the engine during fuel combustion to prevent high-temperature damage to related engine components. 3. Absorb partial heat from heated parts and then transfer it to the vehicle's heat dissipation device, where air-liquid cooling dissipates the heat into the atmosphere.
1
4
Share

How to Cancel the Maintenance Reminder Setting for the 2017 Emgrand?

The method to cancel the maintenance reminder setting for the 2017 Emgrand is as follows: 1. Press the vehicle's one-touch start button to start the engine; 2. Press the set button on the left side of the multifunction steering wheel; 3. Press the mode button on the right side of the multifunction steering wheel; 4. Press the cancel button on the left side of the steering wheel; 5. Observe the dashboard, and the maintenance reminder light will disappear. The purpose of the maintenance reminder for the 2017 Emgrand is to alert the owner that the vehicle requires maintenance. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the vehicle, also known as car servicing.
9
1
Share

What Causes the Cadillac Screen Not to Light Up?

The reasons why the Cadillac screen does not light up are: loose plug, poor line contact, or failure of the power supply module. Taking the 2020 Buick Verano as an example, it is a compact car with body dimensions of: length 4723mm, width 1802mm, height 1466mm, wheelbase of 2700mm, and body weight of 1310kg. The 2020 Buick Verano has a front suspension of MacPherson independent suspension, rear suspension of torsion beam plus Watt's linkage non-independent suspension, drive mode of front-wheel drive, equipped with a 1.0T turbocharged engine, maximum horsepower of 125PS, maximum torque of 180Nm, and maximum power of 92kW.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.