···
Log in / Register

What to Do If Your Car Gets Scratched on the Highway?

4 Answers
Marcus
07/29/25 12:43pm

In the event of a scratch on the highway, first determine if there are any casualties, then proceed accordingly. Below are specific solutions for dealing with scratches on the highway: 1. Both vehicles can move normally, and no one is injured: If neither is the case, according to legal requirements, the issue should be resolved using the 'quick handling' method, and you should not wait for the traffic police on the spot. In this situation, try to take photos from various angles as evidence, move the vehicles to a place where they do not obstruct traffic, and negotiate a solution between the parties. If negotiation fails, call the police. 2. There are injuries, and the vehicle cannot move: The first step is to evacuate all passengers from the vehicle. Remember not to stay inside the car or linger near the accident scene. Immediately move to the emergency parking lane or outside the highway to wait for rescue, and set up a hazard warning sign behind the vehicle. 3. The vehicle can move, but there are injuries: If the vehicle is still operational but there are injuries, drive the vehicle to the emergency parking lane, call for rescue, and set up a hazard warning sign behind the vehicle.

Was this review help?
7
5
Share
LaIsabela
08/14/25 12:49am

Last time I got sideswiped while driving on the highway, my heart skipped a beat! The first step is to stay calm, slowly move your car to the emergency lane or shoulder, immediately turn on the hazard warning lights (double flashers), and ensure you and your passengers exit the vehicle safely. If there are any injuries, call 120 for an ambulance right away. The second step is to take photos of the accident scene with your phone, including the other party's license plate number, vehicle damage locations, and highway signs—don’t argue with the other party to avoid danger. The third step is to call 122 to report the accident, clearly describing your location so traffic police can handle liability determination. Finally, notify your insurance company to file a claim, providing evidence for the settlement. This incident taught me to always pay attention to following distances on the highway and avoid fatigued driving or sudden lane changes. Getting home safely is the most important goal, and I’ll drive more carefully from now on!

Was this review help?
2
3
Share
Expand All
CaliMarie
10/09/25 5:25am

Vehicle scratches on highways are quite common, and safety should always come first when handling them. First, park the vehicle in a safe area, turn on the hazard lights, and check if anyone is injured and requires first aid. Take photos of the entire accident scene, including vehicle details and surroundings, to avoid disputes, and directly call the police at 122 for assistance. After reporting, wait for the traffic police to arrive and issue an accident report. Meanwhile, contact your insurance company to explain the situation and keep all evidence for subsequent claims. This experience reminds me to maintain a safe distance while driving on highways, and regular checks of the braking and lighting systems can reduce accidents. In short, responding quickly and calmly ensures personal safety, and avoid staying on the highway for too long to prevent secondary accidents.

Was this review help?
3
2
Share
Expand All
JulianLee
11/22/25 6:41am

As a parent who frequently drives, highway accidents are the most distressing. If the car gets scratched, first ensure the child is safely seated in the back with a seatbelt, then slowly pull over with hazard lights on. Get out to assess the damage to both vehicles. If there are no injuries, quickly take photos for evidence, including license plates and the highway location. Don’t waste time arguing; call the police at 122 immediately to handle the situation—it’s the best way to protect your interests. Afterward, inform your family that you’re safe, then contact your insurance to arrange repairs. Through this incident, I installed a dashcam and now pay more attention to maintaining a safe distance from the car ahead on highways—preventing similar incidents is crucial. Safety is more valuable than speed.

Was this review help?
16
4
Share
Expand All
More Forum Discussions

Is a Mock Test Required for the Second Subject Retake?

Whether a mock test is needed depends entirely on your confidence level. If you feel completely confident, then a mock test may not be necessary. The purpose of a mock test is to familiarize candidates with the exam environment and allow the instructor to point out areas where points are easily lost. Therefore, a mock test is absolutely essential—being well-prepared is the best way to face the challenge. Below is an introduction to the four subjects of the test: Subject 1: Also known as the theoretical test or driver theory test, it is part of the motor vehicle driver's license assessment. Subject 2: Also known as the small road test, it includes five test items: reversing into a garage, parallel parking, stopping and starting on a slope, turning at a right angle, and driving on a curve. Subject 3: Also known as the big road test, it is the road driving skills test in the motor vehicle driver's examination. Subject 4: Also known as the theoretical test or driver theory test.
17
4
Share

Should the car power disconnect switch cut off the positive or negative terminal?

To save space, cars use a single-wire system where the battery's negative terminal is directly connected to the vehicle frame. The negative terminals of onboard electrical devices can simply be connected to the car body with a nearby wire. Therefore, when disconnecting power, you only need to remove the battery's negative terminal, eliminating the risk of wires sparking. Here are relevant explanations: Negative terminal: The car's negative terminal is connected to the vehicle body, meaning the entire car body serves as the negative terminal. This allows any electrical component's negative terminal to be grounded to the car body, with current returning to the negative terminal through the body. This eliminates the need to run separate wires from each component to the negative terminal, significantly reducing wire usage and simplifying circuit troubleshooting. Positive terminal: If you disconnect the battery's positive terminal instead, since wrenches are metal and conductive, accidentally touching any metal part of the car body during removal would directly connect the battery's positive terminal to the negative terminal, causing a short circuit.
11
4
Share

Why does the engine occasionally shake when waiting at a red light?

The main reason for the occasional engine shaking when waiting at a red light is: This is a resonance phenomenon caused by the engine, frame, steel plates, and tires. The solution is mainly to adjust the engine speed slightly higher or lower. This occurs due to natural wear or deformation of bearings and ball joints. Many minor deformations are completely imperceptible to the naked eye, but as the vehicle speed increases and centrifugal force grows, the oscillation effect caused by bearing deformation becomes more pronounced; hence, the faster the speed, the greater the shaking. Here is some additional information: Functions and types: An engine is a machine capable of converting other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, electric motors, etc. For example, internal combustion engines typically convert chemical energy into mechanical energy. Introduction and history: The term engine can refer to both the power generation device and the entire machine including the power unit. The engine was first invented in the UK, so the concept of an engine also originates from English, with its original meaning referring to "a mechanical device that generates power."
9
3
Share

Is the Subject 1 Test Taken on a Computer?

The driving license Subject 1 test is conducted on a computer. Here are the specific details: 1. Introduction: The theoretical test is uniformly administered at designated motor vehicle theory test centers using specialized computer systems. 2. Method: After sitting down, the test questions won't appear immediately on the computer. Candidates must first input their ID number for identity verification before the exam begins. Additional information: 1. Introduction: Subject 1, also known as the theoretical test or driver's theory exam, is part of the motor vehicle driver's license assessment. 2. Content and evaluation: According to the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses', the test covers driving theory fundamentals, road safety laws and regulations, local regulations, and related knowledge. The exam format is computer-based with 100 questions, requiring a score of 90 or above to pass.
6
5
Share

What is the difference between Guangzhou Honda and FAW Honda?

The differences between FAW Honda and Guangzhou Honda lie in their registration locations, shareholders, and main products. FAW Honda's models have a more mature and bold appearance, with generally higher prices, making them more suitable for the aesthetic standards of mature individuals. On the other hand, Guangzhou Honda's models have a younger appearance and are priced slightly lower than FAW Honda's. Here are the relevant introductions: FAW Honda Company: FAW Honda was established in June 2000, covering an area of 1.61 million square meters, with a current production capacity of 420,000 vehicles per year. The company's main products include the Vios, Corolla EX, Crown, Reiz, Corolla sedans, and the RAV4. The company has a registered capital of 3.3 billion RMB and is registered in the Tianjin Economic-Technological Development Area, with over 12,000 employees. Guangzhou Honda Company: Guangzhou Honda Automobile Co., Ltd. was established on July 1, 1998. It is a joint venture formed by Guangzhou Automobile Group Co., Ltd. and Honda Motor Co., Ltd., with each party holding a 50% stake and a cooperation period of 30 years. Guangzhou Honda currently has two production bases, the Huangpu Plant and the Zengcheng Plant, with a combined production capacity of 480,000 vehicles per year and a total area of 1.6 million square meters. Guangzhou Honda has over 8,000 employees. The main products currently produced by Guangzhou Honda include the Crosstour series of crossover vehicles, the Accord series of sedans, the Odyssey series of multi-purpose vehicles, the Lingpai series of sedans, the City series of sedans, the Fit series of sedans, and the self-owned brand Everus series of sedans, totaling seven series with over 30 models.
18
1
Share

Is a Loader Water Temperature of 100 Degrees Normal?

A loader water temperature of 100 degrees is abnormal and may cause the radiator to burn out. During normal operation, the temperature should be between 60-80 degrees. Under prolonged high-load conditions, it is permissible to reach below 95 degrees, and in areas with low altitude, it should not exceed 99 degrees. If coolant and a corresponding pressure radiator cap are used, the temperature can exceed 105 degrees. Additional information: The normal engine water temperature is between 80-90 degrees. Generally, engine coolant can withstand a maximum temperature of around 110 degrees, and the boiling point of coolant is at 120 degrees when it starts to boil. A water temperature of 100 degrees does not cause boiling unless pure water is used as the coolant.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.