What to Do If Your Car Gets Locked?

2 Answers
DeCatherine
07/25/25 5:45am
If your car is locked, it means you have parked in an unauthorized area. In this case, you should contact the relevant authorities to pay the fine and have the lock removed. Here are some specific suggestions: 1. Avoid Illegal Parking: The number of cars on the road is continuously increasing, and the growth rate of car ownership in China is very rapid. This has led to severe traffic congestion in many cities. With more cars and fewer parking spaces, parking has become a significant issue. The difficulty in finding parking often results in illegal parking, so drivers should be cautious and avoid parking in prohibited areas. If you park illegally in urban areas, traffic police may issue a ticket. Although illegal parking does not result in point deductions, it can incur a fine of 100 yuan. 2. Leave a Contact Number: When driving to a destination with limited parking spaces, consider alternative transportation like biking or taking the bus. It's advisable to check for large paid parking lots or spaces near your destination before heading out. Always keep a contact number visible in your car so that if your vehicle obstructs others, they can quickly reach you. Most locked cars do not have a contact number displayed.
Was this review help?
17
0
Share
KevinRose
08/10/25 5:52pm
Last time I parked in someone else's private parking space, my car got locked and I couldn't retrieve the keys inside at all. I panicked at first, but after calming down, I thought to check for any contact number. Sure enough, there was a note on the window asking me to call the property management. After they arrived, I explained the situation, paid the fine and unlocking fee, which took about half an hour in total. This reminded me to always confirm whether it's a private area before parking and to use map apps to find public parking lots. If anyone encounters a similar situation, don't panic—directly contacting the property management or a locksmith is the safest approach. Otherwise, trying to force the lock yourself might damage the car and cause more trouble, leading to greater losses. Always remember parking rules—this was quite a lesson.
Was this review help?
18
0
Share
Expand All
More Forum Discussions

How to Remotely Start a BMW with the Key?

BMW remote start method: Press the lock button on the remote key three times consecutively to start the engine remotely. More details about remote start are as follows: 1. Remote vehicle start refers to the function of remotely starting the engine or motor via the remote key without entering the vehicle. 2. The principle involves sending a signal through the key or mobile phone to remotely start the engine. Most models can be controlled via the car key. 3. The remote start control system can only be installed in automatic transmission models. This is because automatic transmissions are equipped with a TCU control unit, which informs the ECU engine control unit about the gear position. The engine will only start when the onboard computer confirms the gear is in the P (Park) position, preventing accidental vehicle movement. 4. The remote control range is typically no less than 50 meters, allowing the engine or motor to be started in advance from home or office if the vehicle is parked in a ground parking lot.
13
3
Share

What is the calculation method for horsepower and power?

Horsepower and power calculation relationship: 1. Metric system: 1 horsepower = 735 watts = 0.735 kilowatts; 1 kilowatt = 1.36 horsepower; 2. Imperial system: 1 horsepower = 746 watts = 0.746 kilowatts; 1 kilowatt = 1.34 horsepower. The following is relevant information: 1. Automobile power refers to the work done by the car per unit time, and power refers to the work done by an object per unit time. The greater the power, the greater the torque, and the higher the pulling force of the car. Maximum power is commonly used to describe the dynamic performance of a car. 2. Due to the differences between the imperial and metric systems, the definitions of horsepower are fundamentally different. Imperial horsepower (hp) is defined as: a horse pulling a 200-pound (lb) object 165 feet (ft) in one minute, multiplied to equal 33,000 lb-ft/min; while metric horsepower (ps) is defined as a horse pulling a 75kg object 60 meters in one minute, multiplied to equal 4500 kgm/min.
6
3
Share

What is Front-Engine Rear-Wheel Drive?

Front-engine rear-wheel drive (FR) refers to a vehicle configuration where the engine is positioned at the front and the rear wheels are responsible for driving. It is one of the most traditional drivetrain layouts. The full name is front-engine rear-wheel drive, where the front wheels handle steering while the rear wheels provide propulsion for the entire vehicle. Vehicles with this layout offer the following advantages: 1. When starting, accelerating, or climbing on well-paved roads, the load on the drive wheels increases, meaning the adhesion pressure on the drive wheels also increases, resulting in superior traction performance compared to front-engine front-wheel drive (FF) layouts. 2. The axle load distribution is more balanced, leading to better handling stability and ride comfort, as well as extended tire lifespan. 3. The engine, clutch, and transmission assemblies are located close to the cabin, simplifying the arrangement of control mechanisms. 4. The steering wheels are non-driven, making the steering mechanism simpler and easier to maintain.
1
5
Share

How to Turn on the Low Beam Headlights of Jetta VS5?

The method to turn on the low beam headlights of Jetta VS5 is to rotate the turn signal lever on the left side of the steering wheel clockwise once, and the low beam headlights will be turned on. Low beam headlights are used when driving at night in conditions with no street lights, poor illumination, or low visibility such as fog, rain, snow, dust, or hail. Here is an introduction to the use of low beam headlights: 1. In cities where lighting conditions are generally good, vehicles should use low beam headlights when passing through well-lit sections at night. The illumination distance of low beam headlights is about 30-40 meters. When driving at a speed of 55 km/h at night, if a situation is detected and the brakes are immediately applied, the stopping distance is exactly 30 meters. 2. When a motor vehicle is driving at night in conditions with no street lights, poor illumination, or low visibility such as fog, rain, snow, dust, or hail, and when a following vehicle is driving close to the vehicle in front in the same direction, low beam headlights should be used. When a motor vehicle passes through sharp curves, slopes, arch bridges, crosswalks, or intersections without traffic lights at night, it should alternately use high and low beam headlights to signal.
10
2
Share

How to Appeal a Red Light Violation for Motor Vehicles?

If the red light violation was not caused by the driver's own fault, in addition to early correction through methods such as review by legal officers, it can also be resolved through administrative reconsideration or administrative litigation. More relevant information is as follows: 1. While driving, if a driver mistakenly runs a red light due to being blocked by a large vehicle ahead, for such special circumstances, the traffic management department will verify and correct according to legal procedures. If the red light violation indeed occurred because the signal was obscured by the vehicle in front, or if the driver ran the red light to urgently transport a patient, in addition to early correction through methods like review by legal officers, the involved party can also appeal through channels such as administrative reconsideration or administrative litigation. 2. When electronic surveillance at intersections captures red light violations, it typically takes three photos as evidence. One photo shows the vehicle before crossing the stop line during the red light, and the other two show the vehicle continuing to move forward, crossing the stop line, and completely entering the intersection during the red light. These three photos clearly record the vehicle's movement during the red light. If the vehicle only slightly crosses the stop line during the red light but stops immediately, the traffic management department will not impose a penalty.
15
4
Share

How to Adjust the Time on a Highlander Car?

The time adjustment buttons for the Highlander car are located below the clock screen. Here is a detailed guide on how to adjust the time on a Highlander car: 1. Below the clock screen, there are two buttons for adjusting the time—H for hour and M for minute. 2. On the right side of the steering wheel, there is a DISP button. Switch to the CLOCK display, press and hold the hour digit until it flashes, then adjust the hour. Press and hold for about 5 seconds, and the minute digit will flash, allowing you to adjust the minutes. 3. The Highlander features a spacious body with an innovative and roomy interior. Additionally, the Highlander comes equipped with the highest standard safety features in its class. 4. The representative model of the Highlander is powered by a 3.5L V6 engine with an output of up to 201 kW, paired with a stepped 5-speed automatic transmission, providing smooth acceleration, excellent fuel economy, and an enjoyable driving experience. Moreover, the four-wheel-drive system, combined with the newly developed suspension system and 19-inch large-diameter wheels on the high-rigidity unibody chassis, ensures outstanding handling, ride comfort, and off-road performance.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.