What to Do If You're Afraid to Drive After Buying a New Car?

How much to turn the steering wheel when making a left turn at an intersection?

When turning at an intersection, the amount of steering wheel turn depends on the size of the turn. The smaller the intersection, the greater the angle of the steering wheel turn for a left turn. Turning too much at a large intersection may lead to driving in the opposite direction, especially when making a left turn across two or three lane lines. If the vehicle is in the right lane line and the steering wheel is turned too much, it may affect the left-turning vehicles on the left. The correct method is to first turn the steering wheel slightly less than half a turn, and if it feels insufficient, add a little more to make it just right. Below are some techniques for turning at intersections: 1. Turn the steering wheel one full turn for a left turn. 2. For a small left turn intersection, turn the steering wheel one full turn, and add a little more if it's not enough. 3. For a large left turn intersection, first turn the steering wheel half a turn, and add a little more if the angle is insufficient.

16

4

Share

How long does it usually take to practice for the automatic transmission driving test (Subject 3)?

Subject 3 generally requires about 3-4 days of practice before you can schedule the test. More information about Subject 3 is as follows: 1. Overview: Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies depending on the type of vehicle license. 2. Test Content: The road driving skills test for Subject 3 generally includes: preparation before getting on the car, simulated light test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, driving straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, etc.

1

2

Share

Should You Press the Brake When Engaging the Clutch for Starting?

When starting the car, it is necessary to press the brake pedal while engaging the clutch, primarily to prevent the car from rolling forward. This starting sequence of pressing both the clutch and brake should be followed whether driving on flat roads or steep slopes, mainly for safety reasons. Relevant information is as follows: 1. Starting: On flat roads, you can directly press the clutch without needing to press the brake, relying on the clutch to control the car's speed. Once the car starts moving, you can fully release the clutch. If the car is on a slope, it is best to press the clutch while also pressing the brake to prevent the car from rolling back or suddenly lurching forward. 2. Note: When not pressing the brake, you can use the handbrake. Once the car's semi-engagement point is found, releasing the handbrake will prevent the car from rolling back. The primary function of the car's clutch is to ensure a smooth start, so for the safety of the car, it is essential to follow driving rules when operating the vehicle.

16

1

Share

What is the actual fuel consumption of the Nissan Kicks?

According to the comprehensive fuel consumption data released by the Ministry of Industry and Information Technology, the Nissan Kicks has a fuel consumption of approximately 5.6L/100km. Relevant details are as follows: 1. Power: The Nissan Kicks is equipped with a 1.5L naturally aspirated engine across all models, delivering a maximum horsepower of 124 HP, a maximum power of 91 kW, and a maximum torque of 153 N·m. For a small-displacement naturally aspirated engine, its fuel consumption is inherently low. If the driver maintains steady driving habits, the car can be very fuel-efficient. 2. Fuel Efficiency: There are many ways to improve a car's fuel efficiency, primarily by cultivating good driving habits. If the driver frequently engages in aggressive driving, such as heavy acceleration and braking, the engine load will increase, leading to higher fuel consumption. Conversely, if the driver adopts a more stable driving style, with gentle acceleration and braking, the engine will operate more smoothly, resulting in lower fuel consumption.

9

2

Share

What is the fuel consumption of the Beidou Star x5?

The 1.0L displacement model of the Beidou Star x5 has an approximate fuel consumption of around 6L per 100 kilometers, while the 1.4L displacement model consumes about 6.4L per 100 kilometers. The following factors affect fuel consumption: 1. Air conditioning: Whether the air conditioning is used. 2. Fuel efficiency: Driving conditions, the most fuel-efficient speed is at a constant and economical RPM. 3. Vehicle weight: The lighter the vehicle, the more fuel-efficient it is; electrical load, the more electricity used, the greater the magnetic resistance of the generator; driving habits. 6. Temperature: Engine temperature, optimal around 70 degrees, too low and the oil viscosity increases, reducing lubrication. Too high and the oil's adhesion decreases, reducing lubrication, while the cooling fan consumes electricity and thus fuel; oil performance. 8. Vehicle issues: Tire resistance, wider tires have greater resistance, and under-inflated tires also increase resistance; vehicle age.

12

0

Share

Why does an automatic transmission car suddenly stop shifting up?

Here are several reasons why an automatic transmission car may not shift up: 1. Improper adjustment of the throttle cable or throttle position sensor: Inspect and adjust the throttle cable and throttle position sensor to resolve the issue. 2. Faulty vehicle speed sensor: Check the vehicle speed sensor and replace it if necessary. 3. Sticking shift valve or faulty gear position switch: Inspect the gear position switch signal. If there are no faults in the control system, the automatic transmission should be disassembled for inspection. Additional information: Below is an introduction to automatic transmissions: 1. The automatic transmission must use the manufacturer-specified automatic transmission fluid. Do not mistakenly add manual transmission gear oil, differential-specific oil, or engine oil, as this can cause severe burning of all clutches and brakes after some time of driving. 2. The automatic transmission fluid should be replaced promptly. When changing the fluid, ensure the old fluid is completely drained. The fluid level must be strictly controlled. If the clutches or brakes are burned, the torque converter hydraulic system should be cleaned immediately. The hydraulic system has two oil inlet ports, one located at the bottom of the control valve body.

4

3

Share

What to Do If You're Afraid to Drive After Buying a New Car?

How much to turn the steering wheel when making a left turn at an intersection?

How long does it usually take to practice for the automatic transmission driving test (Subject 3)?

Should You Press the Brake When Engaging the Clutch for Starting?

What is the actual fuel consumption of the Nissan Kicks?

What is the fuel consumption of the Beidou Star x5?

Why does an automatic transmission car suddenly stop shifting up?

Must I Wear Glasses in My Driver's License Photo If I'm Nearsighted?

What Technologies Are Used in Autonomous Driving?

Why is the car air conditioning slow to start?

Meeting or Passing Vehicles?