What to Do If You Purchase a Stock Car?

2 Answers
StJoseph
09/08/25 3:33am
If you buy a stock car, you can request the 4S store to replace the car, refund the payment, and compensate for losses. Here are the drawbacks of stock cars: Aging Parts: After leaving the factory, various fluids, electronic components, batteries, rubber seals, and tires in new cars may suffer from moisture damage and aging due to prolonged storage without periodic inspections and maintenance. High Maintenance Costs: Only a very few dealerships perform periodic inspection and maintenance measures, which are not actually costly but consume manpower and time. Some 4S stores even park cars outdoors, exposing new cars directly to sun, wind, and rain. Frequent Quality Issues: For stock cars stored for too long, without proper warehouse management, the aging of electronic components and rubber products is often undetectable without professional testing equipment. Many overstocked vehicles also suffer from oil and power shortages.
Was this review help?
12
5
Share
LeviMarie
09/20/25 2:21am
If I buy a stock car, the first thing I do is inspect it thoroughly from head to toe. A car sitting in storage for so long might have deformed tires or a completely drained battery. I immediately ask the dealer to help recharge it and test all electronic devices like the air conditioning and lights to see if they're malfunctioning. I also get down to check for any rust on the chassis and whether the engine oil and brake fluid have deteriorated. The interior needs a close look too—checking if the leather seats or plastic parts have aged or cracked. If something feels off, I bring along a car-savvy friend for a test drive to listen for any unusual noises from the brakes or steering. Remember to ask about the storage time in advance; if it's been over six months, it's best to request a free battery replacement or minor maintenance. In short, while stock cars are cheaper, a thorough inspection can save you a lot of trouble down the road.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is the principle behind capturing reverse driving on highways?

Devices for capturing reverse driving are usually installed at key sections, such as the on and off ramps of highways. The capture system compares front and rear images (for example, one second before and one second after) to determine if a vehicle is reversing. Different devices may have different principles, but this is generally how it works. Additionally, there are manually controlled cameras for capturing such violations. Here are some precautions for driving on highways: 1. Safety Check: Before getting on the highway, check for any potential safety hazards. 2. Seat Belts: Always wear seat belts, including in the front and rear seats, and avoid placing loose items in the car. 3. Stay in One Lane: Avoid frequent lane changes on the highway, switching between the passing lane and the driving lane, and never make sudden, unannounced decelerations or stops in the driving lane. Do not drive side by side with other vehicles, stay in the passing lane for extended periods, or attempt to overtake from the emergency lane. Also, prepare for lane changes well in advance when exiting the highway to avoid missing the exit.
11
0
Share

How to Detect Fault When the Generator is Not Generating Electricity?

Generator not generating electricity detection method: Use a multimeter voltage range to detect or connect an external ammeter for detection. The following are the reasons why the generator is not generating electricity: 1. Diode breakdown and no rectification effect. 2. The carbon brush is stuck in the brush holder. 3. The rotor's magnetic field winding is not energized. 4. The stator windings have a short circuit or grounding. 5. The rotor's claw poles are loose. Additional Information: The car generator is the main power source of the car. Its function is to supply power to all electrical equipment when the engine is running normally and to charge the battery at the same time. The car's generator consists of stator, rotor, end cover, and bearing components, where the stator is used to generate alternating current.
14
2
Share

What to Do When Your Driver's License Reaches Six Years?

After your driver's license has been valid for six years, it needs to be replaced. If your driver's license has exceeded its validity period by less than one year, you can still follow the normal procedures to apply for a replacement due to expiration. To replace the license, the driver must submit the original driver's license, a health condition certificate, the driver's license application form, and a personal photo to the issuing authority of the driver's license. The vehicle management office will process the replacement within one working day after approval. Additional Information: Below is the calculation method for the demerit point cycle of a driver's license: 1. The cycle starts from the day the driver's license is first issued and lasts for 12 months. 2. Based on the severity of the traffic violation, demerit points can be assigned in five levels: 12 points, 6 points, 3 points, 2 points, or 1 point. 3. For any traffic violations committed by the driver, penalties and demerit points will be imposed simultaneously.
16
2
Share

What is the average fuel consumption of a car?

Calculation method of car fuel consumption: The fuel consumption per 100 kilometers is equal to the volume of a certain amount of fuel (liters) divided by the distance the car can travel (kilometers) under that fuel amount, multiplied by 100. If a car consumes 4 liters of fuel and can travel 50 kilometers, then the car's fuel consumption per 100 kilometers is calculated to be 8 liters, which is commonly referred to as "8 liters of oil". Methods to reduce fuel consumption: 1. Correctly adjust tire inflation pressure: Tire pressure that meets the requirements can reduce the rolling resistance of the wheels and lower fuel consumption. In addition, when the tire pressure is slightly higher than the specified value by +0.2 bar, fuel can also be saved. 2. Moderate use of in-car auxiliary electrical equipment: Using certain electrical equipment will significantly increase fuel consumption, such as the cooling function of the air conditioning system. If the heating purpose has been achieved, the seat heater should be turned off in time. When there is no fog or ice on the rear window, the window heater should be turned off in time. 3. Correct use of gears: Match the speed with the appropriate gear, do not drive at high speed with low gear or low speed with high gear. Shift gears in advance, and the speed corresponding to the gear should be appropriate. Do not drive at high speed with low gear or low speed with high gear.
15
4
Share

Is Tire Pressure Monitoring Necessary for Cars?

Tire pressure monitoring is necessary for cars. It involves real-time automatic monitoring of tire pressure during vehicle operation and alerts for tire leaks or low pressure to ensure driving safety. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure. Wireless transmitters send pressure information from inside the tire to a central receiver module, which then displays the pressure data for each tire. The system automatically alerts when tire pressure is too low or there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): TPMS combines the advantages of both systems mentioned above. It equips direct sensors in two diagonally opposite tires and includes a 4-wheel indirect system. Compared to using only direct systems, this hybrid system can reduce costs and overcome the limitation of indirect systems in detecting simultaneous low pressure in multiple tires. However, it still cannot provide real-time data on the actual pressure in all four tires as effectively as direct systems.
19
5
Share

Where is the fuse box located in a Ford Focus?

The fuse box in a Ford Focus is located on the driver's side of the center console. Here is some relevant information about the fuse box: 1. On the inner side of each fuse box cover, there are corresponding numbers and text descriptions to help locate the desired component. 2. The automotive fuse box is used to install car fuses and can be categorized by the size of the fuses: small automotive fuse box, medium automotive fuse box, and large automotive fuse box. 3. When selecting an automotive fuse box, factors such as the current rating of the fuses and the size requirements of the fuses should be considered to choose the appropriate fuse box.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.