What to Do If You Miss the Scheduled Subject 1 Test Without Canceling the Appointment?

1 Answers
SanMadelyn
07/30/25 1:37am
Missing the scheduled Subject 1 test without canceling the appointment will be considered an absence, and you will need to reschedule. There is no limit to the number of times you can schedule the Subject 1 test; it can be scheduled indefinitely. The Subject 1 test can be scheduled through the driving school where you registered, or you can schedule it yourself using the mobile app "Traffic Management 12123." Scheduling Steps: Open the "Traffic Management 12123" mobile app and enter the homepage; After entering the main interface, click "More" to access the business center; Find and click on "Driver's License Services"; In the "Driver's License Services" interface, find and click on "Test Scheduling"; Then follow the app's guidance step-by-step to complete the test scheduling. Subject 1 Test Scheduling Rules: For the first-time scheduling of the Subject 1 test, the sorting time is based on the initial application date for the driver's license or the application date for the additional driving qualification. For non-first-time scheduling, the sorting time is based on the date of the last test taken.
Was this review help?
3
2
Share
More Forum Discussions

Where is the tire pressure reset button for Haval H6?

The Haval H6 tire pressure monitoring system does not have a dedicated reset button. Simply inflate all four tires to 2.6bar and drive the vehicle for a while, and the tire pressure will reset automatically. Solutions for insufficient tire pressure are as follows: If no visible damage is found, inflate the tires to normal pressure and reset the tire pressure system; If a puncture is detected during inspection, drive to a tire repair shop promptly for a patch, then reinflate the tire; If the tire pressure warning persists after inflation without any punctures, it may be due to air leakage caused by a deformed wheel rim. It is recommended to inspect and replace the wheel rim. Hazards of excessive tire pressure are as follows: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving; decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, leading to internal cracks, blowouts, and even tire bursts.
14
5
Share

What is the working principle of the Passat fan coupler?

The working principle of the Passat fan coupler is that when the engine temperature is low, the coupler automatically disengages, causing the fan to stop rotating. When the engine temperature rises above a certain threshold, the coupler automatically engages, and the fan starts rotating to regulate the temperature. Functions of the fan coupler: Ensure the motor does not stall or burn out. It can meet the requirements for heavy-duty startup conditions, reducing startup time and average startup current. It allows for no-load startup and convenient clutch operation. It minimizes impact and vibration during startup and operation, extending the service life of the load equipment. It also has an energy-saving effect. Precautions for coupler usage: Do not alter the working medium of the coupler. For hydraulic couplers, regularly inspect the quality and quantity of the working oil and replace or replenish it as needed. The fusible plug of the hydraulic coupler must not be replaced with other types of screws. Enhancing the cooling and ventilation of the coupler can reduce the risk of fusible plug blowout and minimize the waste of the working medium.
1
5
Share

Why is the MG6 not responding when starting?

The reasons why the MG6 does not respond when starting are as follows: 1. Running out of fuel. If the fuel gauge shows below the red line, the car naturally won't start. 2. Dead battery. This could be due to a drained battery from leaving the headlights on for too long or the battery reaching the end of its lifespan. It is generally recommended to replace the battery every 2 years. Additionally, installing xenon headlights, high-power audio systems, or DVD players can also cause electrical circuit issues in the vehicle. 3. Incorrect gear position. For automatic transmission cars, the gear must be in P (Park) or N (Neutral) to start. If it's in R (Reverse) or D (Drive), the car won't start. Some manual transmission cars may also fail to start if the clutch is not depressed. 4. Lack of antifreeze. Some car owners use water or low-quality antifreeze, which can cause the entire cooling system to freeze in extremely cold winter conditions. This can lead to a cracked engine, a non-functional water pump, failure to start, and damage to other engine components. 5. Excessive carbon buildup in the vehicle.
9
3
Share

Is the Audi Q3 compliant with China's National VI emission standards?

The new Audi Q3 is a model that meets the National VI emission standards. National VI emission standards: The National VI emission standards refer to the sixth stage of China's national standards for controlling pollutant emissions from motor vehicles. These standards are established to prevent environmental pollution caused by exhaust emissions from compression-ignition and gas-fueled spark-ignition engine vehicles, protect the ecological environment, and safeguard human health. The National VI emission standards specify the following limits: carbon monoxide (CO) emissions at 700mg, non-methane hydrocarbon (NMHC) emissions at 68mg, nitrogen oxide (NOx) emissions at 60mg, and particulate matter (PM) emissions at 4.5mg. Methods to check a car's emission standards: Check the vehicle's environmental protection compliance label or the page in the vehicle certificate where the label starts; estimate the vehicle's emission standard based on its manufacturing year; or use the original or a copy of the motor vehicle registration certificate to inquire at the local vehicle management office. The Audi Q3 is equipped with a 1.4T L4 turbocharged engine and a 2.0T L4 turbocharged engine, delivering a maximum horsepower of 150PS and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
6
5
Share

When should car spark plugs generally be replaced?

Under normal maintenance conditions, car spark plugs should be replaced after driving 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's recommended to follow the owner's manual. The following standards can be referenced for maintenance replacement: Platinum spark plugs should be replaced at 40,000 kilometers, ordinary nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers. Methods to determine if spark plugs are damaged: Remove the spark plug and observe its appearance color to assess its condition. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug's insulator skirt should be reddish-brown, with an electrode gap between 0.8-0.9mm and no signs of electrode burning. If the spark plug has oil stains or deposits but isn't damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged with signs like blistering at the top, black streaks, cracks, or melted electrodes, the cause of damage should be identified. After troubleshooting, replace with a new spark plug. Additionally, if the spark plug appears smoke-blackened, it indicates incorrect heat range selection, rich fuel mixture, or oil leakage.
14
3
Share

Where is the cabin air filter located in the Audi A3?

The cabin air filter of the Audi A3 is located behind the glove compartment on the passenger side. Here is more information about the Audi A3: 1. The Audi A3 is equipped with two types of engines: a 1.4-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.4-liter turbocharged engine delivers 150 horsepower and a maximum torque of 250 Nm. This engine reaches its maximum power output at 5000 to 6000 rpm and its peak torque at 1750 to 3000 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. This engine is paired with a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 320 Nm. It achieves its maximum power at 5000 rpm and peak torque between 1600 and 4000 rpm. This engine employs a hybrid injection system and combines an aluminum alloy cylinder head with a cast iron block. It is also matched with a 7-speed dual-clutch transmission, which offers fast gear shifts and high transmission efficiency, making it particularly suitable for pairing with small-displacement turbocharged engines. 4. The Audi A3 uses a MacPherson strut front suspension and a multi-link independent rear suspension.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.