What to Do If You Lose Your BYD Car Key?

1 Answers
SanEliana
07/29/25 7:44pm
Pros and Cons: The advantage is that it is economical, but the disadvantage is that the original mechanical key can open the car door but cannot start the vehicle. Pros and Cons: The advantage is that it is very secure, as neither the original electronic nor mechanical keys will work, but the disadvantage is that it is relatively much more expensive.
Was this review help?
3
3
Share
More Forum Discussions

What are the effects of insufficient coolant on a car?

The effects of insufficient coolant on a car are: the engine water temperature will be too high, leading to boiling over. The function of coolant is to dissipate heat from the engine. Without coolant, the car engine and radiator lack protection, which affects the heat dissipation efficiency of the radiator. If the engine temperature continues to rise without effective cooling, the antifreeze cannot circulate normally. Continuing to drive under such conditions may cause severe engine damage in serious cases. Coolant is an essential working medium for the normal operation of water-cooled engines. If the engine overheats, it can lead to reduced air intake efficiency, decreased engine power, increased tendencies for pre-ignition or detonation, and premature damage to components. If the engine is too cold, it can result in poor-quality air-fuel mixture entering the cylinders, decreased engine power, increased fuel consumption, and acidic substances in combustion byproducts corroding components and accelerating wear.
7
4
Share

What does 10w40 engine oil mean?

10w40 engine oil is suitable for environments above minus 25 degrees Celsius. The '10' represents the minimum applicable temperature of the oil, which is minus 25 degrees, 'w' stands for Winter, and '40' represents the high-temperature viscosity of the oil. The kinematic viscosity of engine oil at 100 degrees Celsius is 14.5 centistokes. The number before 'w' indicates the low-temperature fluidity of the oil; the smaller the number, the better the low-temperature fluidity. The number after 'w' represents the viscosity grade of the oil at 100 degrees Celsius; the larger this number, the better the protection the oil provides to the engine at high temperatures. Engine oil must have sufficient viscosity to prevent wear between moving parts and to form an oil film between them under various operating temperatures. However, the fluidity of the oil should not be so high as to affect engine startup; it must generate the least friction under continuous operating conditions.
8
0
Share

What does the SVS light on the car dashboard mean?

The SVS light displayed on the car dashboard refers to the engine fault indicator light. The reasons for its illumination include: fuel emission system malfunction; intake tract malfunction; spark plug carbon buildup; sensor malfunction; poor fuel quality; engine carbon buildup; three-way catalytic converter malfunction; engine knocking. The solutions include cleaning the spark plugs; checking if the oxygen sensor connector is loose; replacing the oxygen sensor; replacing the three-way catalytic converter; cleaning the engine; draining the old gasoline from the fuel tank and replacing it with high-quality gasoline. SVS is the fault light that appears when the ECU (Engine Control Unit) or TCU (Transmission Control Unit) of an electronically fuel-injected car detects a problem with the engine or automatic transmission. All electronically fuel-injected cars have an SVS fault indicator light. For manual transmissions, it indicates an engine fault, while for automatic transmissions, it indicates faults in both the engine and the automatic transmission. The SVS light is a standard indicator in the automotive industry, responsible for alerting about abnormalities in the powertrain system and prompting users to have the vehicle inspected at a service center. When the powertrain system's self-diagnosis detects an abnormality, the SVS light will alert the user to have the vehicle inspected. An SVS light alert may originate from the engine, transmission, or gear shift mechanism. When the SVS light flashes, it indicates a current fault in the powertrain system, requiring inspection at a service center.
8
3
Share

What does engine power reduction mean?

Engine power reduction refers to the decrease in gasoline combustion efficiency, resulting in reduced engine output power. The reasons for this reduction include: 1. Excessive carbon deposits inside the engine, leading to reduced ignition energy and decreased intake efficiency, causing idle weakness; 2. Adding incompatible fuel grades or a blocked fuel tank vent, clogged fuel filter, or partial blockage of the fuel line between the fuel tank and carburetor, which cannot meet the required fuel supply, resulting in an overly lean air-fuel mixture; 3. Long-term use of the air filter without timely cleaning causing blockage, insufficient air intake leading to an overly rich air-fuel mixture; 4. For vehicles with turbochargers, failure of the turbocharging device.
8
4
Share

What are the symptoms of a bad fuel pump?

Symptoms of a bad fuel pump: 1. Weak acceleration with a jerking sensation when accelerating sharply; 2. Difficulty starting; 3. A buzzing noise while driving; 4. The engine warning light is on; 5. Engine shaking. Causes of fuel pump damage: 1. When fuel quality is poor, various impurities in the fuel tank can be sucked into the fuel pump motor, causing damage; 2. Waiting until the fuel light comes on to refuel, which can cause the fuel pump to be in a low position, lacking sufficient cooling and lubrication; 3. Long-term failure to replace the fuel filter, leading to severe blockage in the fuel supply system, making the fuel pump work harder and eventually causing damage due to prolonged high-load operation.
4
5
Share

What is the difference between 92, 95, and 98 gasoline?

92, 95, and 98 gasoline differ in their octane ratings: 92 gasoline has an octane rating of 92%; 95 gasoline has an octane rating of 95%; and 98 gasoline has an octane rating of 98%. The higher the octane rating, the better the combustion efficiency of the gasoline, resulting in significantly lower fuel consumption. Additionally, a higher octane rating improves the gasoline's anti-knock properties. When the air-fuel mixture is injected into the cylinder, the piston moves upward to compress the mixture, increasing pressure and temperature. If the gasoline's anti-knock properties are too low, combustion may start before the spark plug ignites, leading to knocking or detonation. Knocking not only affects engine performance but can also cause damage. Therefore, car owners should choose the gasoline grade recommended by the manufacturer. There is no need to deliberately use higher-octane gasoline, as it can be both costly and harmful to the engine.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.