What to Do If You Lose Your Bora Car Key

2 Answers
CassidyLynn
07/23/25 8:21pm
The following are the methods to deal with a lost Bora car key: 1. Use the spare key; 2. Contact a professional locksmith company; 3. Visit a 4S store to configure a new key; 4. Replace the entire car lock. Here is some relevant information about the Bora: 1. The Bora is a compact 4-door, 5-seater sedan with body dimensions of 4663mm in length, 1815mm in width, 1462mm in height, and a wheelbase of 2688mm. 2. The Bora is equipped with a 1.2T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 85 kW and a maximum torque of 200 Nm. 3. It features front-wheel drive, with a front suspension using a MacPherson independent suspension and a rear suspension using a torsion beam non-independent suspension.
Was this review help?
19
1
Share
ValeriaDella
08/10/25 6:18pm
I've been driving my Bora for several years, and I've also experienced losing the keys. It was a bit panicking at the time. Actually, the first step is not to panic—check if there's a spare key at home or the office. If you have one, you can use it to drive the car right away. If not, you'll need to contact a Volkswagen 4S shop or a professional locksmith. The Bora's key has an anti-theft chip, so a self-made copy won't open the door. When going to the shop, bring documents like the vehicle registration and ID card. They'll help you rematch the key, which might take a day, and the cost could range from a few hundred to over a thousand, depending on the key type. I usually recommend making an extra spare key and keeping it in a safe place, or buying a key tracker to attach to the car—this makes it easier to find if lost. Also, if security is a concern, some people opt to replace the entire lock cylinder, though that’s more expensive and time-consuming, so it depends on your budget. Overall, don’t be afraid of the hassle—handling it promptly avoids issues like driving at night without lights.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

How to Replace the Battery in a Lincoln Key Fob?

Lincoln key fob battery replacement steps: 1. Press the release button on the back of the key fob and pry open the cover. 2. Insert a coin or flathead screwdriver into the slot and twist to separate the housing. 3. Remove the old battery. There may be grease on the battery terminals or circuit board, which does not need to be wiped off. 4. Install the new battery with the '+' marks facing each other. The label between the batteries should be replaced as required by the user manual. 5. Reassemble the housing and cover. Finally, press any button on the key fob to verify proper operation and complete the replacement.
18
2
Share

Why is the car air conditioner so noisy?

There are several main reasons for the loud noise of a car air conditioner, which are: 1. Abnormal wear of the air conditioning pump causing noise. 2. Loose air conditioning belt or insufficient tension of the tensioner pulley. 3. Foreign objects entering the interior of the air conditioning blower. 4. Malfunction of the blower, etc. Additional information: The solutions to the above reasons mainly include: adjusting the temperature setting switch/knob to change the set target temperature, reducing the difference between the actual temperature inside the car and the set temperature. Adjust the fan speed setting switch/knob to lower the fan speed, and switch the automatic control mode to manual mode.
16
5
Share

What does 'cancel' mean in a car?

CANCEL is used to deactivate the cruise control, SET is to set the current speed as the cruising speed, and RESUME is to restore the original cruising speed. Cruise control system is also known as speed control device, speed control system, or autonomous driving system. When the CANCEL button is pressed during cruising, the cruise control will be temporarily suspended, and the CRUISE indicator light above the water temperature gauge will turn off. Its function is to automatically maintain the vehicle speed as set by the driver without the need to press the accelerator pedal, allowing the car to travel at a fixed speed. Installing a cruise control system in a car enables the driver to avoid controlling the accelerator pedal during long highway drives, reducing fatigue and unnecessary speed changes, which can save fuel consumption. The working principle of the cruise control system is that the cruise control component reads the pulse signal from the speed sensor, compares it with the set speed, and issues commands to mechanically adjust the throttle opening via the servo to keep the vehicle at the set speed. Other button functions in the car are as follows: Fuel tank opening button: This button is used to remotely open the fuel tank cap from inside the car. Vehicles equipped with this button allow the driver to open the fuel tank cap from inside the car. ESP switch: This is used to turn the vehicle's ESP on or off. The vehicle's ESP system is in the working state by default. Reverse radar button: This is used to turn the reverse radar system on or off as needed. The driver can press this button to manually control the operation of the reverse radar. Central locking button: This is the control button for the central door lock system. The driver can press this button to simultaneously lock or unlock all doors. Air conditioning button: In extreme temperatures during summer and winter, drivers and passengers often turn on the air conditioning for comfort. However, incorrect operation of the air conditioning button can affect its effectiveness. Wiper button: Wipers are commonly used in rainy weather and when the windshield is dirty. Front and rear hood buttons: The front hood is rarely opened, usually only for maintenance and repairs, while the trunk is opened more frequently. These two buttons are generally located on the left side of the driver's position. Lane departure warning switch: Pressing this button activates the lane departure warning function, which alerts the driver when the vehicle crosses lane markings. MODE button: Pressing this button switches between audio modes such as CD, radio, or Bluetooth. Window lock button: Pressing this button allows only the driver to control the window operation, effectively preventing children in the front passenger or rear seats from opening the windows.
1
1
Share

Which Button to Press for Foggy Windows on Rainy Days?

Press the defogging button, turn on the air conditioning cooling (A/C) switch, set the temperature to the lowest, and activate the external circulation to defog. Both cold and warm air can be used to defog car windows, but warm air is slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing on the glass and achieving the purpose of defogging. The method of using warm air to defog is the same as using cold air, but it should be noted that warm air should not be used for defogging on rainy days as it may initially worsen the fog. Always use external circulation when defogging car windows. The reason for foggy car windows: There is a certain temperature difference between the inside and outside of the car. If the temperatures inside and outside the car are different, the surface with the lower temperature will have a saturated vapor pressure lower than the vapor pressure of the surrounding environment, causing water vapor to gather on the glass surface and form tiny water droplets, resulting in fog. Methods to defog car windows: Air Conditioning Cooling: Use the air conditioning's cooling and dehumidifying function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car and the air conditioning is not turned on promptly, the exhaled air has high humidity, causing the windshield to fog up quickly. At this point, you can turn on the air conditioning to blow cold air onto the windshield, using the dehumidifying function to remove the fog shortly. If the humidity is too high and the air conditioning is not effective enough, you can slightly open the windows to quickly reduce the humidity inside the car. Of course, combining both methods will yield faster results. Air Conditioning Warm Air: Use the method of reducing the temperature difference to remove fog. In winter, blowing warm air onto the glass quickly raises the temperature of the windshield, reducing the temperature difference between the inner and outer surfaces of the window glass, thereby preventing excessive fogging of the windshield. However, it should be noted that the rear and side windows heat up more slowly, so it takes longer to completely remove the fog. Whether the air conditioning is automatic or manual, turning it on helps with dehumidification. Do not set the air conditioning temperature to the coldest position, as this may cause frost to form on the outer surface of the windshield over time. Applying Anti-Fog Spray for Prevention: Spray a small amount of defogging agent on the car windows and wipe it clean to remove dirt and stains. While polishing the glass, a thin transparent protective film is formed, effectively preventing water vapor from condensing on the glass and forming fog, which is especially useful in cold winters. Alternatives to defogging agents include dish soap, soapy water, glycerin, alcohol, or saline solution. After applying, let it dry and then wipe off any excess fibers with chamois or a soft dry cloth. This can ensure the car windows remain fog-free for several days. Opening Windows for Airflow: If the fog inside the car is not too heavy, you can open the windows on both sides to create airflow between the inside and outside of the car, reducing the temperature difference and allowing the fog to dissipate slowly. The principle of this method is the same as using cold air from the air conditioning. The downside of opening windows for airflow is very obvious—it cannot be used during rain, snow, on highways, or when the fog is heavy.
7
2
Share

What are the dimensions of the Audi A6?

The body dimensions of the Audi A6 are 4951mm in length, 1866mm in width, and 1483mm in height, with a wheelbase of 2925mm. Below is an introduction to the Audi A6: 1. Overview: The Audi A6 is a luxury car produced by Audi, available in both sedan and station wagon variants. 2. Powertrain: The Audi A6L offers four engine options: 2.0TFSI, 2.5FSI, 2.8FSI, and 3.0TFSI, with the 2.5L engine being a newly added power option. There are four transmission choices: a 6-speed manual transmission, an 8-speed multitronic continuously variable transmission, a manual-automatic integrated transmission, and a 7-speed S-tronic dual-clutch transmission.
3
4
Share

How to Check Car Tire Wear?

Tire wear can be checked by looking for a molded mark on the tire shoulder, which is evenly divided into five parts around the circumference. On the tire tread surface, along the five equal parts of the tire circumference, there is a 1.6mm high ridge axially set at the bottom of the tread groove. When the tire tread wears down to 1.6mm from the groove bottom, this part of the groove begins to break, resulting in a clear crack, alerting the driver that the tire must be replaced. Additional Information: 1. The sidewall of a car tire displays the tire specifications, brand, manufacturer's standard wheel hub, production number, and maximum load code, all imprinted by a mold. 2. When the tire tread wears down to less than 1.6mm remaining in the groove, skidding often occurs, increasing fuel consumption. This not only affects the vehicle's handling but also easily leads to traffic accidents.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.