···
Log in / Register

What to Do If You Keep Failing the Subject 3 Driving Test?

4 Answers
PrestonDella
07/29/25 1:40pm

After logging in, the candidate should click on the exam reservation application to enter the reservation interface and proceed with the application process. The system will automatically sort the applications after the reservation period ends. Successful sorting will allow the candidate to confirm the exam reservation within the specified date and select the exam session. The system will automatically review the applications 5 days before the exam date and notify the candidates of their scheduled exam date, venue, and session.

Was this review help?
1
2
Share
Millard
08/14/25 4:42am

Failing the driving test (Section 3) can be really frustrating, but don't lose heart. I failed three times myself before passing. After each attempt, I carefully reviewed my mistakes. I used my phone's memo app to note down the points I lost marks on: Was it forgetting to signal during a turn? Or parking too far from the curb? On my third failure, I realized I kept veering off during the straight-line driving—turns out I was gripping the steering wheel too tightly when nervous. So, I rented a car specifically to practice, focusing on keeping my hands light during straight-line driving and using peripheral vision to align with the lane markers. Before my final test, I even visited the test site to observe others' routes, jotting down where to slow down in advance in a notebook. The fourth time, I passed with full marks! The key is not to see failure as the end—every setback is a chance to improve.

Was this review help?
18
2
Share
Expand All
DeEva
10/10/25 4:34am

I also stumbled during my third driving test. The key is to adjust your mindset properly. On the exam day, avoid drinking coffee as it may cause hand tremors. Arrive at the test center half an hour early, take deep breaths, and review the key movements taught by your instructor. It's best to schedule several mock tests with your instructor, having him sit beside you to simulate the examiner, focusing particularly on practicing the straight-line driving and lane-changing maneuvers you often struggle with. If you frequently mix up the lighting operations, record the instructions and practice simulating them at home. Here's another tip: when crossing pedestrian crossings, remember to turn your head left and right with exaggerated movements to ensure the surveillance cameras clearly capture your actions. That's how I passed on my fifth attempt—never let pressure throw you off your game.

Was this review help?
7
1
Share
Expand All
LaDiana
11/23/25 5:45am

Most failures in the driving test (Subject 3) are due to overlooked details. First, identify which part caused your failure: if you keep crossing the line during roadside parking, practice repeatedly using tape on the ground as a reference; if you forget to signal when changing lanes, set a daily phone alarm to remind yourself; if the car drifts during straight-line driving, focus on a distant fixed point instead of staring at the hood. Spend more time observing others from the passenger seat during practice, noting their observation techniques. After failing twice, I practiced finding the clutch's semi-engagement point for an hour every morning and never stalled again. Before the test, mentally rehearse the entire route like a movie—it's incredibly helpful.

Was this review help?
14
2
Share
Expand All
More Forum Discussions

can you put led bulbs in older car headlights

Yes, you can install LED bulbs in older car headlights, but it's not always a simple plug-and-play upgrade. The success and legality of the conversion depend heavily on your vehicle's original headlight housing design. Older cars typically use reflector housings , which are precisely designed to focus the light from a single filament in a halogen bulb. LED bulbs have multiple light-emitting points, which can scatter light incorrectly in a reflector housing, creating a blinding glare for oncoming drivers and providing you with a poor, uneven beam pattern. This is often illegal and will likely fail a vehicle inspection. The key is your headlight housing type. If your older car has projector housings , the swap is generally more successful. Projector lenses do a better job of controlling and focusing the light from an LED source, resulting in a clean cutoff line that minimizes glare. However, even with projectors, you may need to adjust the beam height after installation. Beyond the housing, you must consider the CANbus system . Modern vehicles use a CANbus network to monitor bulb function. Older cars lack this, but some aftermarket LED kits include error code eliminators or load resistors to prevent hyper-flashing in turn signals or dashboard warning lights, which may be necessary depending on your car. Here’s a quick comparison of the factors involved: Factor Halogen Bulbs (Original Equipment) LED Bulb Conversion Compatibility with Reflector Housings Excellent, designed for this housing Poor, often causes significant glare and illegal beam pattern Compatibility with Projector Housings Good Generally good, with a much cleaner cutoff line Light Output (Lumens) ~1,000-1,500 lumens ~3,000-12,000+ lumens Beam Pattern Focus Precise and compliant with regulations Unpredictable without proper housing match Legal Compliance (FMVSS 108) Fully compliant Often non-compliant unless part of a certified assembly Typical Lifespan 500-1,000 hours 30,000-50,000 hours Installation Complexity Simple replacement May require adapters, resistors, and beam adjustment Ultimately, for an older car with reflector headlights, the most reliable and legal upgrade is to replace the entire headlight assembly with a modern DOT/SAE-compliant LED unit. If you have projectors, a quality LED bulb kit is a viable option, but you should always aim the headlights on a wall after installation to verify the beam pattern is correct and not aimed too high.
14
5
Share

can you leave your car idling for a long time

Leaving your car idling for extended periods is generally not recommended. While modern engines are robust, prolonged idling (over 10-15 minutes) can lead to unnecessary engine wear, wasted fuel, increased pollution, and potential legal issues in some municipalities. The engine runs rich, leading to incomplete combustion that can foul spark plugs and contaminate engine oil more quickly. For most daily situations, turning the engine off is the better choice for your vehicle's health and your wallet. The primary issue is that the engine doesn't reach its optimal operating temperature while idling. This "cold" operation causes fuel to condense on the cylinder walls, diluting the oil and increasing wear on critical components like piston rings and cylinder liners. Furthermore, the alternator charges at a lower rate at idle, which can slowly drain the battery if power-consuming accessories like the air conditioner or headlights are running. The environmental and financial costs are significant. Idling for just 30 minutes a day can waste over $650 in fuel annually, assuming a national average gas price. Many states and cities have anti-idling laws, especially near schools, with fines that can be substantial. Idling Duration (Minutes) Estimated Fuel Consumed (Gallons, V6 Engine) Approximate Cost (at $3.50/gallon) CO2 Emissions (Pounds) 10 0.05 - 0.07 $0.18 - $0.25 1.0 - 1.4 30 0.15 - 0.21 $0.53 - $0.74 3.0 - 4.2 60 0.30 - 0.42 $1.05 - $1.47 6.0 - 8.4 120 (2 hours) 0.60 - 0.84 $2.10 - $2.94 12.0 - 16.8 There are a few exceptions. In extreme cold, idling for a minute or two allows oil to circulate before gentle driving. For hybrids, the gasoline engine may not even start during short stops. The best practice is to turn off your engine if you expect to be stopped for more than 60 seconds, except in traffic. This simple habit saves money and reduces engine wear.
11
4
Share

can you put boiling water on a car windshield

No, you should never pour boiling water on a car windshield. This action poses a high risk of cracking or shattering the glass due to a principle called thermal shock . Automotive glass, especially the laminated safety glass used for windshields, is designed to be strong but is extremely vulnerable to rapid temperature changes. When you pour boiling water (around 212°F or 100°C) onto a frozen windshield (which could be below 32°F or 0°C), the outer surface expands rapidly from the heat. However, the inner layer of glass remains cold and contracted. This creates severe stress within the glass, exceeding its structural tolerance and causing it to crack. The severity of the risk depends on several factors, including the exact temperature difference, the quality of the glass, and any pre-existing minor chips or imperfections that act as stress points. A small chip can quickly turn into a major crack spanning the entire windshield. While some types of tempered glass , used for side and rear windows, are more resistant to thermal shock than laminated glass, the practice remains unsafe for any automotive glass. The table below illustrates the approximate thermal shock resistance, or the maximum safe temperature change, for different types of automotive glass. This data is based on general industry manufacturing standards. Glass Type Common Use Key Characteristic Approximate Thermal Shock Resistance (ΔT) Laminated Glass Windshield Two glass layers with a plastic interlayer 90°F to 120°F (50°C to 70°C) Tempered Glass Side & Rear Windows Heat-treated for surface compression 150°F to 180°F (80°C to 100°C) Acrylic (Plexiglas) Race Car Windows Plastic polymer 140°F to 160°F (60°C to 70°C) Polycarbonate Armored Vehicles Extreme impact resistance 190°F to 220°F (90°C to 105°C) The safe and correct method is to use your car's defroster setting with the A/C on to dehumidify the air, combined with a plastic ice scraper. For a quicker start, use a 50/50 mixture of isopropyl alcohol and water in a spray bottle, which melts ice without damaging the glass or your car's paint.
16
4
Share

can you put different brand tires on your car

Yes, you can install different brand tires on your car, but it is generally not recommended and can compromise safety and performance. The most critical rule is to always install matching tires on the same axle. Mismatching brands, or more importantly, models and tread patterns, across axles can lead to unpredictable handling, especially in emergency maneuvers or poor weather conditions. The primary risks involve differences in key performance characteristics. Each tire model has a unique blend of attributes: Tread Pattern and Compound: This affects wet and dry grip. A tire with superior grip on the rear and weaker grip on the front can cause oversteer (where the car's rear end slides out), while the opposite can cause understeer (where the car plows straight ahead in a turn). Tread Wear Rate: If tires wear at different rates, you can quickly end up with a significant difference in tread depth between axles, which negatively affects braking stability and hydroplaning resistance. Size and Construction: Even with the same size marking on the sidewall (e.g., 225/45R17), subtle differences in actual dimensions, internal construction, and sidewall stiffness can affect the vehicle's handling balance. This is especially critical for all-wheel drive (AWD) and 4x4 vehicles . These systems are designed to operate with all tires having a nearly identical rolling circumference. Significant differences, often as small as 3/32nds of an inch in tread depth, can cause excessive wear and potential damage to the drivetrain's center differential or transfer case. For these vehicles, most manufacturers recommend replacing all four tires at once. Tire Characteristic Impact of Mismatching Example Scenario Tread Pattern Varying water evacuation; increased hydroplaning risk. New all-season tires on the front, worn all-season tires on the rear. Tread Compound Inconsistent grip levels; unpredictable cornering. Performance summer tires on the rear, touring all-season tires on the front. Tread Depth Altered vehicle balance and braking stability. 8/32" tread on the front axle, 3/32" tread on the rear axle. Size (Actual Diameter) Drivetrain strain in AWD vehicles; incorrect speedometer reading. New 225/45R17 tires on one axle, slightly smaller worn 225/45R17 tires on the other. Sidewall Stiffness Different cornering response and steering feel. Stiff run-flat tires on the rear, standard touring tires on the front. The safest approach is to always replace tires in complete sets of four. If that's not possible, ensure the two new tires are installed on the rear axle to maintain stability and that they are the same brand, model, and size as the tires you plan to keep.
16
1
Share

can you put diesel in a petrol car by mistake

No, you should never put diesel fuel in a petrol (gasoline) car. Doing so, even once, can cause severe and expensive damage to your vehicle's fuel system and engine. The most critical action is to not start the engine . If you've only added diesel and haven't turned the key, the damage is likely contained to the fuel tank and lines, making it a much simpler and cheaper fix. If you start the engine, the diesel will circulate and damage critical components. The core issue lies in the fundamental differences between the fuels and the engines designed for them. Petrol engines use spark plugs to ignite a fine mist of fuel. Diesel fuel is much oilier and less volatile; it's designed to ignite under high compression in a diesel engine. In a petrol car, diesel won't vaporize properly, clogs the fuel injectors, and provides poor combustion. This can lead to immediate symptoms like heavy smoke from the exhaust, stalling, a complete failure to start, or severe knocking sounds from the engine. The repair process is methodical. A mechanic must drain and flush the entire fuel system, including the tank, fuel lines, fuel pump, and fuel injectors. They will also need to replace the fuel filter. If the engine was run, the cost escalates significantly as diesel's improper combustion can damage the catalytic converter and oxygen sensors, which are very expensive components. Aspect of Damage/Repair Consequence / Typical Action Required Estimated Cost Range (USD) Misfueling Frequency Common enough that most repair shops have procedures for it. N/A Primary Immediate Action Do not start the engine. Push the car to a safe location. $0 (if you catch it in time) If Engine NOT Started Full fuel system drain and flush; replace fuel filter. $200 - $500 If Engine WAS Started Above, plus potential damage to fuel pump, injectors, catalytic converter, and oxygen sensors. $1,500 - $5,000+ Fuel Pump Wear Diesel lacks the lubricity of petrol, causing premature pump failure. $400 - $800 (part & labor) Catalytic Converter Damage Unburned diesel clogs and overheats the converter, destroying it. $1,000 - $2,500+ Fuel Injector Clogging Diesel's viscosity clogs precision injectors designed for petrol. $500 - $1,500 (for cleaning/replacement) Towing Cost Vehicle will likely need to be towed to a repair shop. $100 - $200
4
4
Share

can you put petrol in car with engine running

No, you should never refuel a car with the engine running. It is a significant safety hazard. While the probability of an incident might seem low, the potential consequences are severe, including fire or explosion. The primary risk is from static electricity or a stray spark from the electrical system igniting gasoline vapors, which are highly flammable and present around the fuel filler neck. Modern vehicles have multiple safety systems, but intentionally creating a dangerous scenario is never worth the minimal convenience. The primary dangers are: Ignition Source: The running engine, its electrical components, and the exhaust system are all potential sources of ignition. A single spark is all that's needed. Static Electricity: You can build up a static charge by getting in and out of your vehicle. A discharge when you touch the nozzle is a common cause of fueling fires, and a running engine increases the overall risk. Fuel System Sensors: Modern cars have sophisticated evaporative emission control systems (EVAP). Refueling with the engine on can confuse these sensors, potentially triggering a check engine light and storing fault codes because the system detects an unexpected pressure change. While the odds are in your favor, the stakes are incredibly high. The safety procedure is simple: turn the engine off, and if you need to, get back in the car during fueling (e.g., in cold weather), be sure to touch a metal part of the car away from the filler neck to discharge any static electricity before handling the nozzle again. Hazard Risk Factor Supporting Data / Authority Static Electricity Ignition High The Petroleum Equipment Institute cites static discharge as a frequent cause of fueling fires. Vapor Ignition from Engine Moderate to High National Fire Protection Association (NFPA) code 30A prohibits refueling with engines running. EVAP System Damage Low to Moderate Can trigger check engine lights; repair costs can range from $200-$500 for sensor replacement. Legal Violation High (at stations) Explicitly forbidden by posted signage at virtually all gas stations in the US; can result in fines. Potential for Catastrophic Outcome Extreme A gasoline fire can lead to total vehicle loss, severe injury, or fatality.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.