What to Do If You Keep Crossing the Lines in Subject 2 S-Turn?

1 Answers
SanVictoria
07/29/25 11:45pm
Solutions for frequently crossing the lines in Subject 2 S-turn are as follows: 1. During the test, avoid being nervous and keep the vehicle speed slow. Especially when navigating the S-turn, the speed should be even slower. If the speed is too fast and the steering wheel is turned abruptly, significant deviation is likely to occur, inevitably leading to crossing the lines. 2. Excessive speed during the test may result in an invalid score. This is because there are sensors on the road that may fail to detect your performance, which naturally won't count. A speed of 30km/h is most suitable for navigating the S-turn. 3. Once the speed is properly controlled, simply use the hood as a reference and align it with the left and right boundaries of the S-turn. Keep the front of the car tracing along the boundary lines, and avoid making excessively large movements when turning the steering wheel.
Was this review help?
12
4
Share
More Forum Discussions

How to Use the Envision Dash Cam?

Press and hold the power button for about 1 second to turn it on, and press and hold the power button for about 3 seconds to turn it off. Press the Mode button to cycle through recording mode, photo mode, and playback mode in order. Press the Menu button twice to display the system settings screen.
5
0
Share

Do all new cars come with a spare tire?

Most new cars are equipped with a spare tire, with only a very few models being exceptions. Some luxury high-end models do not require a spare tire because they are equipped with run-flat tires and a zero-pressure driving system. Below is relevant information: Spare tires are divided into full-size spare tires and non-full-size spare tires, and the type of spare tire varies depending on the vehicle brand. Here are the precautions when inspecting a new car: 1. Paint - When inspecting a new car, walk around the vehicle to check for any wear or color differences on the paint surface, as scratches can easily occur during transportation. 2. Tires - Check the car tires for wear, ensure the spare tire is intact, verify the tire hair is normal, and confirm that the production dates are close.
17
5
Share

What is the best temperature to set the car air conditioner for effective cooling in summer?

In summer, the car air conditioner is generally set to 26℃, which is the most comfortable temperature for Chinese people's physique. The car air conditioner switch is located on the car's center console. The A/C button is the switch for the air conditioner compressor, while for automatic air conditioners, the switch is the AUTO button. To turn on the air conditioner for cooling, press the A/C button or AUTO button, then adjust the fan speed and direction according to your needs. Below is an introduction to how the air conditioner works: After the engine starts, turn on the A/C switch, the electromagnetic clutch engages, and the engine's power is transmitted to the compressor. The compressor circulates the compressed refrigerant to the evaporator, where the refrigerant vaporizes, absorbs heat, and produces cold air. The fan then blows this cold air into the cabin.
9
4
Share

Battery Model for Volkswagen Tiguan 1.8T

The original battery for the Volkswagen Tiguan used Varta in older models, with the model number 6-QW-60(580)-L and a voltage of 12V60AH. The newer models use Bosch batteries, with the model number L2-400 and the same voltage of 12V60AH. Below is some relevant information about the Volkswagen Tiguan battery: 1. Car batteries need to be charged regularly. If a battery is left unused for a long time, it will slowly discharge on its own until it becomes unusable. Therefore, the car should be started periodically to charge the battery. 2. Clean the battery terminals regularly and apply special grease to protect the wiring harness. Also, frequently check the battery accessories and connecting circuits.
18
1
Share

What is the fuel consumption of the Accord 1.5T?

According to the comprehensive fuel consumption data released by the Ministry of Industry and Information Technology, the comprehensive fuel consumption of the tenth-generation Accord 1.5T version is 6.6L/100km. However, based on the actual measured data from some tenth-generation Accord owners, the fuel consumption is generally around 8L/100km. The factors affecting the car's fuel consumption are as follows: 1. Engine displacement: The larger the engine displacement, the greater the car's power. Of course, the car's fuel consumption will also be significantly higher. 2. Vehicle weight: An increase in the car's weight will increase the engine's load, thus increasing fuel consumption. In daily use, try to remove unnecessary items from the car and avoid filling the fuel tank to the brim to prevent excessive weight from affecting fuel consumption. 3. Fuel quality: Higher-quality fuel has better anti-knock properties, making the car more fuel-efficient. Therefore, using high-quality fuel not only extends the engine's lifespan but also reduces fuel consumption to some extent. 4. Driver's driving style: The driver's driving style is a significant factor affecting fuel consumption. To reduce fuel consumption, drive steadily in daily use and avoid sudden braking or acceleration.
6
5
Share

How does the EGR solenoid valve work?

EGR solenoid valve works as follows: When the electromagnetic coil of the EGR control solenoid valve is energized, the atmospheric vent port closes, and the intake manifold connects with the EGR valve vacuum chamber; When the electromagnetic coil of the EGR control solenoid valve is not energized, the valve core moves downward, the vacuum passage is cut off, and at this time the atmospheric vent port opens, the EGR valve vacuum chamber will connect with the atmosphere. The following is the related content introduction: The function of the EGR valve is to redirect the exhaust gas from the engine combustion back to the intake manifold to participate in combustion again, reducing the combustion chamber temperature and improving engine efficiency, thus optimizing the combustion environment. It also reduces nitrogen oxide emissions, minimizes knocking, and extends the engine's service life.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.