What to Do If You Keep Crossing the Line During Curve Driving?

2 Answers
Davis
07/25/25 3:18am
If you keep crossing the line during curve driving, you can remember five key points for steering wheel control to pass smoothly. Here are the detailed steps: 1. Point One: After entering the S-curve, observe carefully. When the hood overlaps with the right-side curve, turn the steering wheel one full turn to the left. 2. Point Two: As the vehicle continues forward, when the left front of the car overlaps with the right-side curve, turn the steering wheel half a turn to the left, then make slight adjustments to keep the front of the car always overlapping with the curve. 3. Point Three: Before entering the right turn, observe when the left front of the car aligns with the left-side curve, straighten the steering wheel. 4. Point Four: As the vehicle enters the right curve, when one-third of the left front hood aligns with the curve, turn the steering wheel one full turn to the right. 5. Point Five: Continue observing. When the right front of the car overlaps with the left-side curve, start turning the steering wheel half a turn to the right, then make slight adjustments to keep the front of the car always overlapping with the left-side curve. Finally, when exiting the curve, ensure the front of the car is straight and the steering wheel is centered.
Was this review help?
2
4
Share
VonJake
08/10/25 4:56pm
Always hitting the lines during curve driving? As a beginner, I had the same issue, especially during the curve section of my driving test. The main reasons are driving too fast or poor steering control. I found it crucial to slow down before entering the curve, reducing speed to within 20-30 km/h. Focus your eyes on the exit point of the curve ahead rather than staring at the lines on the ground—this helps avoid misjudging position. Hold the steering wheel steadily and turn it gently without sudden movements. Practice more in open areas, starting with slow-speed S-curves and right-angle turns. I improved significantly by practicing half an hour daily. Proper seat adjustment is also important; setting it higher provides a better panoramic view and reduces blind spots. Stay relaxed—take deep breaths if nervous. With repeated practice, you’ll hit fewer lines. Remember, safety first—don’t rush.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What's the reason for the car display screen not showing and going black?

Here are the reasons why the car display screen may not show and go black: 1. Reason one: It could be an issue with the software itself, such as the software being unstable or incompatible with the mobile phone system. Uninstalling the software can solve this problem. 2. Reason two: If there is incompatibility between software, you need to install and uninstall each software one by one to test and identify which software is causing the issue. Once found, uninstalling it should solve the problem. 3. Reason three: The screen going black during standby is mainly because the phone automatically turns off the screen when it does not detect any key trigger signals for a long time, which is the standby mode. When using the phone, pressing a key activates the circuit inside the phone, and the screen lights up. The reason for the black screen could be that the phone system sends a command to light up the screen, but due to a delay in the circuit, the screen does not respond in time, resulting in a black screen.
8
1
Share

Is the first car maintenance free?

Car first maintenance is free, the items included in the first maintenance are: 1. Replace engine oil and oil filter, clean air filter element; 2. Check whether the coolant level of the car is in normal condition; 3. Check whether there are scratches on the car brakes and chassis parts; 4. Check whether the oil level of the power steering fluid is normal and whether there is oil leakage at each oil pipe interface; 5. Check the aging and tightness of the generator, air conditioner, water pump and belt; 6. Check the tire pressure and wear condition. Car maintenance refers to the preventive work of regularly checking, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing.
20
3
Share

How to Clear Points from a Driver's License?

Clearing points from a driver's license: Points will automatically reset to zero at the end of a scoring cycle if the accumulated points do not reach 12. However, if there are unpaid fines when the automatic reset occurs, the points from the previous cycle will carry over to the next cycle. Therefore, it is important to pay fines promptly. Additional Information: 1. Accumulating 12 points: If a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall confiscate their motor vehicle driver's license. The driver must report within fifteen days to the traffic management department of the public security authority at the place where the license was issued or where the violation occurred to attend a seven-day study session on road traffic safety laws, regulations, and related knowledge. After completing the study session, the vehicle management office shall conduct an examination on road traffic safety laws, regulations, and related knowledge within twenty days. If the examination is passed, the points will be cleared, and the motor vehicle driver's license will be returned. If the examination is failed, the driver must continue to participate in study sessions and examinations. 2. Driver's License: The full name of a driver's license is a motor vehicle driver's license, also known as a "driver's license." It is a certificate required by law for individuals who operate motor vehicles. Driving a motor vehicle requires certain driving skills, and those lacking such skills may cause traffic accidents if they drive recklessly. Generally, individuals without a license are not allowed to drive on the road. However, for those who have mastered safe driving techniques, the document that permits them to drive on the road is the "driver's license." This indicates that a driver's license is a form of "permit."
11
3
Share

Can WeChat Pay for ETC Card?

WeChat can be used to pay and recharge ETC cards. Below are the detailed steps for paying and recharging an ETC card via WeChat: 1. Access the ETC Payment Section: Open the WeChat app, find and click on [City Services] in the payment section. Under vehicle services, locate and click on [ETC]. 2. Click on Recharge: In the new window, click on "YueTong Card" (or the equivalent local pass card). Then, click on [YueTong Card Recharge] in the services. 3. NFC Function Required: Follow the prompts to complete the operation. Please note that recharging an ETC card requires the phone to have NFC functionality or the use of an officially provided Bluetooth device. This method is applicable to all models of Android and iOS systems.
3
3
Share

What is the fuel tank capacity of the Corolla?

The fuel tank capacity of the Corolla is 50 liters, which is the officially announced data. Corolla owners can also check this information on the vehicle's configuration sheet. The Corolla uses 92-octane gasoline, with a fuel consumption of 6.5L per 100 kilometers. A full tank can provide a driving range of approximately 769km. During daily driving, it is essential to monitor the remaining fuel level in the tank. This is typically done by observing the fuel gauge inside the vehicle. Under normal circumstances, the fuel level will be accurately displayed on the gauge. The fuel gauge usually has 5 to 6 segments, and it is advisable to refuel when only 2 segments remain to avoid running out of fuel midway. During actual refueling, the amount of fuel added may exceed the marked capacity. This is because the fuel tank capacity specified by the manufacturer is measured from the bottom of the tank to the safe fill level. There is additional space from the safe fill level to the tank opening, which is designed to accommodate fuel expansion due to temperature increases without causing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
12
0
Share

What does the headlight assembly mean?

The headlight assembly is an integrated vehicle lighting system that combines the bulb, lamp holder, lamp housing, and wiring. Below is a detailed introduction to the classification of automotive lights: 1. Headlights: Combination headlights are located at the front of the vehicle and primarily serve the functions of illumination and signaling. The light emitted by the headlights illuminates the road ahead, enabling the driver to drive safely at night. 2. Combination taillights: Combination taillights are located at the rear of the vehicle and primarily serve the functions of illumination and signaling. 3. Turn signals: These are lights used to indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate lights: License plate lights primarily illuminate the license plate, making it possible to identify the vehicle's license plate at night.
19
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.