What to Do If You Have Over 100 Points Deducted for Traffic Violations?

What is PORSCHE?

PORSCHE is Porsche. Below is an introduction about Porsche: 1. Introduction: Porsche is a luxury car brand under the German Volkswagen Group and a major representative of European and American automobiles, founded in Stuttgart, Germany in 1931. 2. Logo: The English logo of Porsche uses the surname of Ferdinand Porsche, the founder of the German Porsche company. The graphical logo adopts the shield-shaped city emblem of Stuttgart, where the company is headquartered. 3. Brand Collaboration: In February 2018, Audi and Porsche announced that they would collaborate to develop an electric vehicle platform, planning to invest substantial funds by 2025.

17

5

Share

What Causes Steering Wheel Vibration When Braking Above 80 km/h?

There are five main reasons why the steering wheel vibrates when braking at speeds above 80 km/h: 1. This condition is mostly caused by tire deformation or issues with the vehicle's drivetrain. 2. During driving, wear and looseness of the tie rod ball joints, detachment of rubber bushings at the joints, or irregular tire wear can lead to this issue. 3. Often, it is due to tire deformation caused by daily use, such as rubbing, collisions, or aging. 4. Excessive or frequent braking can overheat the brake discs and pads, leading to deformation upon cooling and resulting in steering wheel vibration. 5. A twisted or deformed driveshaft, loose driveshaft universal joints, or lack of lubrication causing rust and stiffness can also be the cause.

9

1

Share

What is the function of the S gear in Volkswagen Passat?

The function of the S gear in Volkswagen Passat is as follows: 1. Output powerful power: In S gear sports mode, the transmission can shift freely, but the shifting timing will be delayed, keeping the engine at high speed for a longer time, allowing the car to move at low gear and high speed for a longer time, thereby obtaining greater torque output and acceleration. 2. Reduce carbon deposits: Cars that drive in congested urban areas for a long time will have more carbon deposits in the engine. Therefore, using the S gear appropriately and regularly is beneficial for removing carbon deposits in the engine, increasing fuel economy, and extending the engine's lifespan.

19

3

Share

What causes the noise when shifting gears in JH6?

JH6 makes a noise when shifting into reverse gear due to gear friction during the shifting process. The reverse gear lacks a synchronizer, making this issue common and generally not requiring repair. Below is an introduction to synchronizer-related information: 1. Function of the synchronizer: The synchronizer is a device inside the transmission that ensures smooth gear engagement when shifting gears while driving. 2. Principle of shifting into reverse gear: The synchronizer makes shifting easier by synchronizing the rotational speeds of the gears. However, the reverse gear is a spur gear and does not have a synchronizer. When shifting into reverse, the reverse gear meshes with two other gears, enabling the vehicle to move backward.

10

3

Share

Where is the headlight fuse of Audi A6L?

The headlight fuse is located near the instrument panel on the driver's side door. Below is some relevant information about the Audi A6L: 1. Introduction: The Audi A6L is the first Audi model introduced to the Chinese market, with its predecessor being the third-generation Audi 100 (code-named C3) introduced in 1988. The Audi A6L is a series developed by FAW-Volkswagen Audi based on the German new A6 and serves as the successor to the A6. In June 2012, the new-generation Audi A6L was launched, equipped with 35-TFSI power, and its exterior design somewhat resembles the new version of the A4L. 2. Design: The new Audi A6L adopts a five-link front suspension design, balancing the necessary rigid connection for sportiness and comfort with low static stiffness. Among them, the hydraulic form of the frame damping support significantly improves driving comfort and effectively reduces the impact and jolt when passing over speed bumps or uneven roads, thereby lessening the impact on the lumbar spine.

4

2

Share

What does traffic violation code 7017 mean?

Violation code 7017 means: At an intersection without traffic signals, signs, road markings, or police direction, motor vehicles failed to take turns passing alternately when encountering queued stops or slow-moving traffic. According to the relevant provisions of the "Road Traffic Safety Law of the People's Republic of China", the penalty is: 0 demerit points; fine amount: 100 yuan; other penalties: warning. Traffic violation codes consist of four to five digits, classified according to the principles in the traffic law. From left to right, the first digit represents the behavior classification code, the second digit represents the demerit point classification code, the third and fourth digits are sequential numbers, and the fifth digit indicates the specific item number. First digit: Behavior classification code, indicating the category in the Road Traffic Law; Second digit: Demerit point classification code, indicating the classification of demerit points for the traffic violation; Third, fourth, and fifth digits: Sequential code, indicating the order of the behavior within the same classification. For example: 13035—"1" indicates motor vehicle behavior, the second digit "3" indicates 3 demerit points, and "035" indicates the fifth item under the third rule in the 3-point deduction category. Behavior classification code explanation: Codes starting with "1" indicate motor vehicle traffic, e.g., 1003; Codes starting with "2" indicate non-motor vehicle traffic, e.g., 2002; Codes starting with "3" indicate pedestrian or passenger traffic, e.g., 3030; Codes starting with "4" indicate highway traffic, e.g., 4002; Codes starting with "5" indicate other regulations, e.g., 5005; Codes starting with "7" indicate implementation rules of provinces, autonomous regions, or municipalities, e.g., 7008; Codes starting with "8" indicate local regulations of cities (prefectures, autonomous prefectures, or leagues), e.g., 8606. There are four common ways to check motor vehicle violations: Visit the office halls of traffic branches in various districts and counties to query through touch terminals; Log in to the external service websites of the Public Security Traffic Management Bureau of each city, find the vehicle violation query section, enter the license plate number and engine number, and click to query; Call the hotline (area code + 114) to inquire; Use the Traffic Management 12123 app (V2.8.1B437 for iOS 15+ or V2.8.1B274 for Android 12+) to query. For the violation of motor vehicles failing to take turns passing alternately at intersections without traffic signals, signs, road markings, or police direction, you can handle it through the Traffic Management 12123 app. After logging in, enter the violation processing workflow, complete the process, and make the payment.

19

5

Share

What to Do If You Have Over 100 Points Deducted for Traffic Violations?

What is PORSCHE?

What Causes Steering Wheel Vibration When Braking Above 80 km/h?

What is the function of the S gear in Volkswagen Passat?

What causes the noise when shifting gears in JH6?

Where is the headlight fuse of Audi A6L?

What does traffic violation code 7017 mean?

What do the letters on the car gear shift represent?

How to Remove the Maintenance Reminder on a Volkswagen?

What is the fuel consumption per 100 kilometers for Volkswagen cars?

What to do if the folding function of the Audi A6L rearview mirror fails?