What to Do If You Have a Flat Tire?

3 Answers
JasmineLynn
07/25/25 1:42am
Then place two stones on the same side as the flat tire to secure the vehicle and prevent it from sliding. Almost all vehicles come with a jack and a wrench, usually stored together with the spare tire under the trunk. Insert the wrench and rotate it clockwise. Locate the support point under the vehicle body. Typically, the support point is at the position shown in the video to bear greater support force and protect the vehicle's structure. This tool is generally also found in the trunk, shaped like a long wrench about half the radius of the wheel.
Was this review help?
6
0
Share
StMiranda
08/11/25 11:24am
When experiencing a tire blowout, the first priority is to stay calm. Avoid slamming on the brakes or jerking the steering wheel to prevent losing control. Gradually slow down and steer the vehicle to the roadside or a safe area to come to a complete stop. Activate the hazard lights to alert other drivers and prevent secondary accidents. Before exiting the vehicle, check the mirrors to ensure no traffic is approaching before opening the door. Retrieve the toolkit and spare tire: Use the jack on the chassis support points, and remember to loosen the wheel bolts before lifting the car; remove the blown tire, install the spare, and tighten the bolts. After replacement, check the tire pressure before lowering the jack, being careful not to pinch your fingers. The spare tire is only for temporary use with a speed limit below 80 km/h—promptly visit a repair shop to check if patching or a new tire is needed. I always recommend weekly checks on tire wear and pressure, especially before long trips—don’t skip this to avoid future hassles. Safety comes first; don’t skimp on small expenses.
Was this review help?
4
1
Share
Expand All
DelBrantley
09/27/25 2:05am
I remember my first flat tire while driving happened on a rainy day, which scared me so much my palms were sweating. Immediately, I recalled what my dad taught me: grip the steering wheel firmly, slow down gradually without slamming the brakes, and pull over smoothly. Once parked, turn on the hazard lights and place the warning triangle 50 meters behind the car—it should be in the toolkit. When changing the spare tire, wear anti-slip shoes—safety first, don’t rush and mess around. I check the spare tire’s pressure monthly; otherwise, like that one time when the spare was flat too, it was really embarrassing. If you can’t change it yourself, just call for roadside assistance—super convenient. I always keep a tire repair kit and an air pump in my car; they’re lifesavers in emergencies. New drivers shouldn’t fear looking clumsy—watch more tutorial videos and practice, so you won’t panic when trouble strikes.
Was this review help?
8
4
Share
Expand All
More Forum Discussions

What is the valve adjustment method for the 430 Weichai P12?

430 Weichai P12 valve adjustment method: 1. Turn the engine to the compression top dead center of cylinder 1 (align with the OT mark, intake valve of cylinder 6 opens), adjust the intake valve clearance of cylinders 1, 2, and 4 to 0.4mm. 2. At the flywheel end, turn the engine counterclockwise to align with the "16" mark on the outer edge of the flywheel. First adjust the exhaust valve clearance of cylinder 1 to 0.5mm, then adjust the brake clearance of cylinder 1 to 1.35mm. 3. Continue turning the engine counterclockwise at the flywheel end to align with the "25" mark on the outer edge of the flywheel. First adjust the exhaust valve clearance of cylinder 5 to 0.5mm, then adjust the brake clearance of cylinder 5 to 1.35mm.
1
5
Share

Is the Qashqai a three-cylinder or four-cylinder?

The Qashqai is a four-cylinder vehicle. Relevant details are as follows: 1. Exterior Design: The new Qashqai's exterior design is bolder and sharper compared to the new X-Trail, retaining the 'V' shaped front grille, a signature design language of Nissan, paired with sharp headlight clusters, leaving a lasting impression. The side profile of the new Qashqai is not overly adorned with lines but adopts the conventional rounded styling of urban SUVs, with a pronounced three-dimensional effect at the rear, though the overall aesthetic is somewhat understated compared to the striking front face. 2. Interior: Inside, the new Qashqai's cockpit resembles that of the new X-Trail, featuring a floating large-size display, a full LCD instrument panel, a three-spoke multifunction steering wheel, and an electronic gear shift, among other elements, with technological features and a sense of premium quality surpassing the current model. There are also corresponding upgrades in power. According to overseas market information, the new car will be equipped with a 1.3T four-cylinder engine, paired with a 12V mild hybrid system, with a maximum output of 138 horsepower for the manual transmission version and 156 horsepower for the CVT version.
20
5
Share

When to Replace Transmission Fluid?

The transmission fluid in a car should be replaced every two years or every 40,000 kilometers, with the specific interval depending on the vehicle model. The hazards of not replacing transmission fluid in time: 1. Deterioration of transmission: Prolonged operation under high-speed and high-temperature conditions can cause the transmission to deteriorate. A deteriorated transmission will accelerate the wear of mechanical components, and severe deterioration may even damage internal transmission parts. 2. Weak vehicle acceleration: If the transmission fluid is not replaced for a long time, the vehicle may experience weak acceleration when starting, along with slight slipping during driving. 3. Increased transmission wear rate: If the transmission fluid is not replaced for an extended period, it will become thicker, obstructing the transmission cooler. This obstruction leads to rising transmission temperatures, which in turn accelerates the wear rate.
9
0
Share

How to Deal with Severe Low-Frequency Noise After Soundproofing?

Severe low-frequency noise after soundproofing is likely due to the use of incorrect soundproofing materials. It is recommended to use white sound-absorbing cotton (white cotton, Shirley cotton, ultra-fine fiber cotton), which can effectively absorb low-frequency noise waves generated externally or internally. Relevant details are as follows: 1. Avoid full coverage: If vibration damping sheets are chosen as the soundproofing material, do not opt for full coverage. While full coverage of vibration damping sheets can eliminate high-frequency noise during driving, the main noise inside the car is low-frequency noise. Therefore, using full coverage vibration damping sheets will not significantly reduce noise. 2. Counterproductive: Do not assume that more soundproofing projects will yield better results. If vibration damping sheets are applied along with additional sound-absorbing layers like white cotton, it may have the opposite effect, leading to noticeable low-frequency noise and even symptoms like dizziness and tinnitus.
7
0
Share

What is DSG Transmission Death Flashing?

DSG transmission death flashing refers to a malfunction in the DSG transmission where the gear indicator continuously flashes, gears cannot be used normally, shifting becomes difficult, and the transmission temperature rises rapidly. DSG Introduction: DSG refers to the transmission model used by Volkswagen. DSG (Direct-Shift-Gearbox) translates to 'Direct Shift Gearbox' in Chinese. Unlike conventional semi-automatic transmission systems, DSG is based on a manual transmission rather than an automatic transmission, making it a member of the AMT (Automated Manual Transmission) family.
12
5
Share

What are the causes of friction noise when turning the steering wheel of an Audi Q5?

Here are the reasons for the friction noise when turning the steering wheel of an Audi Q5: 1. Lack of oil in the shock absorber's plain bearing: Listen near the hood to determine if the noise is coming from the top mount of the shock absorber. If the noise is from the plain bearing of the shock absorber, applying some grease to the plain bearing may help. If the noise persists after greasing, replacement is necessary. 2. Loose stabilizer bar bushings: Check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced.
12
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.