···
Log in / Register

What to Do If You Get Hit While Driving on the Road?

4 Answers
DiNevaeh
07/23/25 9:56pm
Here are the steps to follow if you get hit while driving: 1. Pull over, turn off the engine, engage the handbrake, cut off the power, turn on the hazard lights, and if it's nighttime, also turn on the width lights and taillights. On highways, set up a danger warning sign behind the vehicle; 2. Check the safety of everyone involved: see if anyone is injured and estimate the damage to both parties. If there are injuries or other situations covered under Article 8 of the new "Road Traffic Accident Handling Procedures," call the police immediately. Otherwise, the parties involved can choose to reach an agreement on their own; 3. Determine liability clearly. The at-fault party should call their insurance company to report the incident, document the vehicle damage, and use a mobile phone to take photos of the scratched areas and the overall condition of the vehicles. Ensure both parties are visible in the photos, and take multiple angles of the front, rear, and damaged areas. Record the vehicle and owner information for both parties, including license plate numbers, driver's licenses, vehicle registration certificates, and insurance certificates. Then, move the vehicles to a location that does not obstruct traffic; 4. Vehicle damage assessment and claims: Go to the insurance company's designated assessment point to evaluate the damage to both vehicles. Afterward, each party can proceed with repairs, keeping all repair invoices. The at-fault party will cover the repair costs and then file a claim with the insurance company.
Was this review help?
1
4
Share
PenelopeRose
08/10/25 5:39pm
If you get into a car accident on the road, as an experienced driver, I suggest prioritizing safety. First, slowly pull over to the side of the road, turn on your hazard lights to avoid secondary accidents, then get out and check if anyone is injured. If there are injuries, call 120 for emergency assistance immediately and also call 110 to report the accident and have the police come to determine responsibility. Avoid impulsive arguments. While waiting for the police, take some photos: the position of the vehicles, the damage, the other party's license plate number—these details are very helpful for insurance claims. Remember to contact your insurance company to report the accident; they can guide you through the next steps, including choosing a repair shop, which can save you a lot of hassle. Make sure you have your insurance policy ready and don’t forget to obtain the accident report. Over years of driving, I’ve found it useful to keep a first aid kit and a power bank in the car for emergencies. After the incident, reflect on the importance of safe driving habits—avoid rushing or driving while tired to reduce risks and ensure everyone’s safety.
Was this review help?
19
2
Share
Expand All
CharlotteRose
09/23/25 5:41am
As a dad with kids, the health of my family is always my top concern when going out. If the car gets hit, immediately stabilize the steering, pull over to the side of the road, turn on the hazard lights, and check the condition of everyone in the car. Call for emergency help right away if anyone feels unwell. After reporting to the police, calmly describe the situation, note the time, location, and the other party's contact information for follow-up procedures—don’t waste time arguing. Notify the insurance company to coordinate the claim while comforting the kids to prevent the minor accident from leaving a psychological impact. Always keep water, snacks, and emergency tools in the car, and organize important documents in a daily bag to avoid last-minute chaos. After returning home, discussing the experience can help the whole family reinforce safety awareness, such as fastening seat belts or scheduling regular vehicle maintenance. Health comes first—preventing major accidents starts with small precautions, and staying calm is the real skill.
Was this review help?
6
4
Share
Expand All
McTessa
11/06/25 7:57am
The core of handling a car accident is following the proper procedures. After stopping the car and turning on the hazard lights, call the police and wait for their arrival to obtain the accident report, which records the responsible party—this serves as the basis for insurance claims. Immediately notify your insurance company and provide the other party's information and photos of the scene to avoid hidden risks from private settlements. If there are injuries, prioritize assistance while protecting your legal rights—do not sign private agreements. For subsequent repairs, use official channels. It is recommended to install a dashcam, keep your driver's license and insurance documents handy, and stay calm in emergencies—having complete evidence ensures peace of mind. Following these simple steps guarantees a smooth and hassle-free process afterward.
Was this review help?
17
3
Share
Expand All
More Forum Discussions

What is the wading depth of electric vehicles?

The maximum wading depth for the vast majority of electric vehicles is 300mm. Here are some additional details: 1. Electric vehicles have better wading performance than fuel-powered vehicles. This is because their powertrain systems are more enclosed, lacking exhaust pipes, and the grilles are mostly sealed, thus avoiding water intrusion issues. 2. Never attempt to wade through water during short-term heavy rain or storms without knowing the road conditions. This is to prevent the risk of vehicle submersion due to excessively deep water. If you cannot determine the water depth, it is advisable to choose an alternative route. 3. After an electric vehicle has been submerged for an extended period and is rescued, avoid attempting to restart the powertrain system. First, have professional technicians conduct appropriate inspections on the high-voltage system components and battery pack. It is recommended to let the vehicle remain stationary for a period before sending it to a repair shop for further inspection and maintenance.
2
5
Share

How Many Types of Motor Braking Methods Are There?

There are three types of motor braking methods, including plugging (reverse current) braking, dynamic (rheostatic) braking, and regenerative braking. A braking motor is a fully enclosed, self-ventilated, squirrel-cage type three-phase asynchronous motor equipped with an additional disc-type DC brake. It consists of a Y-series motor with an additional DC disc-type electromagnetic braking motor installed between the rear end cover and the fan, making it a derivative series of the Y-series. Below is additional information: 1. Plugging Braking: To achieve rapid stopping, the armature voltage of a running motor is suddenly reversed, and a resistor is connected in series in the armature circuit. This is called plugging braking. 2. Dynamic Braking: This refers to suddenly disconnecting the armature power supply of a running DC motor and then connecting a braking resistor in series in the armature circuit, causing the inertial energy of the armature winding to be dissipated in the resistor, thereby achieving rapid braking of the motor. 3. Regenerative Braking: Also known as feedback braking, it is a braking technology used in electric vehicles. During braking, the kinetic energy of the vehicle is converted and stored rather than being wasted as heat.
13
4
Share

What to Do When the Exhaust Pipe Gets Waterlogged?

When a car's exhaust pipe gets waterlogged, you can take it to a 4S shop for a simple cleaning and drying, which will allow the engine to function normally. If the exhaust pipe is waterlogged and the engine stalls, do not attempt to force a restart. Instead, immediately call for roadside assistance.
7
1
Share

What to Do If ID Card Is Lost During Driver's License Test?

If the ID card is lost during the driver's license test, you can apply for a new ID card or a temporary ID card. Here is a brief introduction to the driver's license: 1. Basic Information: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license." It is a license required by law for motor vehicle drivers. The motor vehicle driver's license is a legal document issued by the administrative authorities to individuals who have legally learned to drive a motor vehicle, mastered traffic regulations and driving skills, and passed the relevant tests, permitting them to drive a certain type of motor vehicle. 2. Function: Driving a motor vehicle requires certain driving skills. People lacking these skills may cause traffic accidents if they drive recklessly. Generally, individuals cannot drive on the road without a license. However, those who have acquired safe driving skills are allowed to drive vehicles on the road. This permission is granted through the "driver's license," which serves as a "license certificate."
3
4
Share

Can Low-Speed Branches Scratch Car Paint?

Low-speed branches may cause minor scratches on the car paint. It's obviously not suitable to claim through car insurance, nor is it necessary to go to a car beauty shop for repair. However, if minor scratches on the car are left untreated, they can easily lead to rust on the car paint surface, which is detrimental to future maintenance. Therefore, it is advisable to use a touch-up pen or toothpaste for treatment. Below is additional information: 1. If the rust is not severe, you can first use very fine water sandpaper dipped in water to gently remove the rust spots, but avoid grinding randomly without direction—always grind in straight lines in the same direction. After completely cleaning the area, apply a layer of primer. 2. If the original factory paint is not available, you can purchase a touch-up pen and use it for color application. 3. You can also use ordinary toothpaste to treat the scratches. When you notice new small scratches on the car body, gently apply the toothpaste in circular motions over the scratched area.
19
4
Share

What is BYD's Mobile Power Station?

BYD's Mobile Power Station is a technology that can directly utilize the vehicle's power to provide 220V, 3.3KW power output, enabling electricity extraction and usage. Here are some related introductions about BYD: 1. Appearance: The BYD model is a mid-size SUV with a wheelbase of 2820 mm, and its length, width, and height are 4870 mm, 1940 mm, and 1720 mm respectively. 2. Configuration: The entire series is equipped with a 2.0-liter turbocharged engine. This engine delivers 192 horsepower and a maximum torque of 320 Nm. The engine's maximum power speed is 5500 rpm, and the maximum torque speed ranges from 1500 to 4000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.