What to do if you forget to bring your driver's license during a vehicle inspection?

2 Answers
LincolnAnn
07/24/25 1:55pm
Solutions for forgetting to bring your driver's license during a vehicle inspection: 1. Always be honest with the traffic police and actively cooperate with the inspection. Failure to cooperate may result in fines and points deduction. 2. If you encounter a strict traffic officer, you can present your ID card. The ID number on the ID card can be used to check whether you have obtained a legal driver's license through the system. 3. You can apply for an electronic driver's license, which has the same effect as a physical driver's license. The purpose of traffic police checking the driver's license and vehicle license: 1. Checking the driver's license: whether it is legally obtained, whether it is still valid, whether the driver's license information is forged, whether the vehicle type is within the permitted driving range, etc. 2. Checking the vehicle license: whether it is legally obtained, whether it is still valid, whether the vehicle license information is forged, and whether there are modifications that have not been registered, etc.
Was this review help?
8
3
Share
DelTheo
08/11/25 7:51am
When I first started driving, I also forgot to bring my driver's license. That time, I was stopped by a traffic police officer for a check, and I felt quite nervous. I quickly and politely explained that I had forgotten it. The officer said it was okay and asked me to show my ID card or the electronic driver's license app on my phone, such as the transportation card in Alipay. I opened the app and let the officer scan the QR code for verification, and it passed instantly. I only got a minor violation record and was let go after a brief education. Later, I asked my friends and learned that in China, many places now support electronic documents. As long as you can prove your identity and driving experience, it's usually not a big issue. However, if the officer is strict, they might ask you to go to the vehicle management office to reissue the record first, which could waste time or even result in a fine. So now I’ve developed a habit of checking the documents in my wallet before getting into the car or taking a photo of them in advance and storing it on my phone as a backup. Prevention is always better than remedy, after all—safety comes first.
Was this review help?
1
3
Share
Expand All
More Forum Discussions

What Causes the Squeaking Sound When the Car Window Rolls Up to the Top?

When the car window rolls up to the top and makes a squeaking sound, it may be due to friction between the window limiter or the rubber seal and the glass. Generally, if the car's rubber seal is left outside for a long time, it can easily soften due to prolonged exposure to sunlight. In severe cases, it may even deform or shift, which can prevent the window glass from rolling up and down smoothly or widen the gap between the glass and the rubber seal. This can cause the glass to wobble slightly on bumpy roads, accompanied by unusual noises. Below are some methods for maintaining car window glass: 1. Proper Use of Windshield Washer Fluid: There are many types of windshield washer fluids available on the market, but they mainly fall into three categories: summer-use windshield washer fluid, winter antifreeze windshield washer fluid, and special-effect antifreeze windshield washer fluid. Summer-use windshield washer fluid is primarily used to remove insect residue from the windshield, while winter antifreeze windshield washer fluid ensures that car components are not damaged when temperatures drop below -20°C. 2. Car Window Tinting: A thin layer of heat-insulating film can make a big difference, not only blocking the harsh sun but also providing heat insulation and UV protection. Car heat-insulating films are divided into front and rear windshield films and side window films. Dark heat-insulating films should never be used on the front windshield. Additionally, when choosing a heat-insulating film, the higher the UV protection index, the better, as it can protect the dashboard components from premature aging caused by prolonged sun exposure. 3. Purchasing Glass Insurance for Your Car: Glass breakage insurance is a type of commercial insurance where the insurance company compensates for the loss of the insured vehicle's glass (windshield or side windows) if it breaks independently during use. Independent glass breakage refers to situations where only the windshield or side windows of the insured vehicle are damaged.
16
1
Share

Does the Honda Civic have ESP?

Honda Civic is equipped with ESP. The working principle of ESP is: the control unit judges the driving state based on sensor signals and performs precise calculations for optimal control. When situations like rotation, understeer, or oversteer occur, it individually controls each wheel to enhance vehicle stability. The body dimensions of the Honda Civic are: length 4517mm, width 1799mm, height 1434mm, wheelbase 2700mm, minimum ground clearance 104mm, and fuel tank capacity 47 liters. The Honda Civic is powered by a 1.5T turbocharged engine with a maximum power output of 130kW and maximum torque of 220Nm, paired with a CVT continuously variable transmission.
12
2
Share

What lights to use when passing under an arch bridge at night?

When passing under an arch bridge at night, alternate between high and low beams at least twice. Below is a detailed introduction to the use of lights: 1. When turning at an intersection at night: use low beams. 2. When driving on roads with low visibility at night: turn on high beams. 3. When passing sharp curves at night: alternate between high and low beams at least twice. 4. When passing slopes at night: alternate between high and low beams at least twice. 5. When driving in foggy conditions: turn on the width marker lights, front and rear fog lights, and hazard lights. 6. In case of a breakdown: turn off the headlights and turn on the width marker lights and hazard lights.
10
0
Share

Does the Tiida Need Transmission Fluid Replacement?

Tiida requires transmission fluid replacement. Transmission fluid is an oil product that maintains the cleanliness of the gear system, ensuring the normal operation of the transmission and extending the lifespan of the transmission components. The Tiida has the following dimensions: length 4393mm, width 1766mm, height 1539mm, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 435 liters. The Tiida is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 90kW at 6000 rpm and a maximum torque of 155Nm, paired with a 5-speed manual transmission.
11
0
Share

Where to Check the Production Date of Tires?

The location to check the production date of tires is: the production batch number on the outer edge of the tire. This batch number consists of a set of digits and letters indicating the manufacturing year, month, and quantity. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims, supporting the vehicle body, cushioning external impacts, ensuring contact with the road surface, and maintaining driving performance. Methods for tire maintenance include: 1. Regularly clean stones stuck in tire treads; 2. Minimize exposure to direct sunlight; 3. Promptly check tire pressure; 4. Pay attention to suspension maintenance; 5. Regularly inspect front wheel alignment.
19
3
Share

Under what circumstances should high beams be used in a car?

High beams should be used in the following situations: 1. On roads without street lighting or with poor illumination; 2. When unfamiliar with the road conditions and needing to read road signs; 3. When overtaking another vehicle, switching between high and low beams to alert the vehicle ahead to yield. The method to activate high beams is to push the light control lever outward. Their purpose is to enhance visibility and expand the field of observation. The function of high beams is to improve visibility and broaden the observation range. The hazards of improper high beam usage include: 1. Temporary blindness for oncoming drivers during head-on encounters; 2. Reduced ability to judge width; 3. Diminished perception of speed and distance.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.