What to Do If You Fail the Vision Test for Driving School Application?

2 Answers
HenryFitz
07/25/25 4:13am
If you fail the vision test for driving school application, you can either go to the hospital for a re-examination or wear glasses. This is because the regulation specifies corrected vision. Below is some information about the driver's license medical examination: 1. Examination Content: Primarily involves vision checks, height and color recognition ability, hearing, upper and lower limbs, torso, and feet to detect any abnormalities. The main focus is to check whether the naked eye vision or corrected vision falls within the normal range. If you can see the normal vision chart range with glasses, it is acceptable. 2. Precautions: If you have red-green color blindness, it is considered abnormal, and you cannot pass the regular driver's license medical examination. If your fingers are not fully functional, you can apply for a small car license but not a large vehicle license.
Was this review help?
14
5
Share
MacGraham
08/10/25 5:17pm
Failing the vision test is quite common, and I've helped many people at the driving school deal with it. The first thing is not to panic. Go to a reputable eye clinic for a detailed examination to identify the specific vision issue, such as nearsightedness or astigmatism. In most cases, getting a pair of glasses or wearing contact lenses can solve the problem. These aids are allowed during the driving test, where the requirement is usually a minimum of 0.8 vision in one eye. If glasses don’t help, it might be due to severe nearsightedness or amblyopia, in which case corrective surgery could be considered, but you’ll need to evaluate the risks and recovery time. The driving school will usually let you retake the test—just bring the necessary documentation. Good vision is crucial for safe driving, so don’t push through it. Delaying might affect future applications. I recommend taking regular breaks for your eyes, avoiding prolonged screen time, and ensuring you pass the next test smoothly.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Should the Emgrand GS use 5w30 or 5w40?

The Emgrand GS uses 5w30 fully synthetic engine oil. Engine Oil: Engine oil is an item that every car owner will come into contact with during the vehicle usage process. It is known as the blood of the engine. If there is no engine oil inside the engine, the engine cannot operate normally. Functions: Engine oil not only lubricates the engine but also serves to clean, seal, buffer, prevent rust, and dissipate heat. The choice of engine oil should be based on the engine's requirements and the driver's usual driving habits. It is unnecessary to use overly advanced oil in an engine with lower requirements, nor should lower-grade oil be used in an engine with higher requirements.
6
2
Share

Is Beijing Benz Produced by BAIC?

Beijing Benz is not produced by BAIC. Beijing Benz vehicles are manufactured in a joint venture factory established by Beijing Automotive Group Co., Ltd. and Daimler AG. 2021 Mercedes-Benz E-Class: The dimensions of this vehicle are 5078mm in length, 1860mm in width, and 1484mm in height, with a wheelbase of 3079mm. It is classified as a mid-to-large-sized car and is equipped with a 9-speed automatic transmission. The top speed of the 2021 Mercedes-Benz E-Class is 230 km/h, with a body structure of a 4-door, 5-seat sedan and a fuel tank capacity of 66L. Power: The 2021 Mercedes-Benz E-Class has a maximum horsepower of 184 hp, a maximum torque of 280 Nm, a maximum power speed range of 5800 to 6100 rpm, and a maximum power output of 135 kW. Both the front and rear suspensions are multi-link independent suspensions.
3
4
Share

What Causes the Brake Light to Stay On? How to Fix It?

The reasons and solutions for the brake light staying on are as follows: 1. Check if the brake pads are worn to the limit and replace them in time; 2. The brake light switch can be adjusted—remove, adjust, and reinstall the switch; 3. The brake switch is faulty—the switch is installed above the brake pedal, so repair or replace the switch; 4. Check if the brake fluid is low and top it up in time; 5. Inspect the brake bulb for damage—the brake light is usually installed at the rear of the vehicle, with a red-colored body to enhance light penetration. This ensures that vehicles behind can easily detect braking even in low visibility conditions, helping to prevent rear-end collisions. In simple vehicle models, power flows through a fuse to the brake switch. When the brake pedal is pressed, the switch connects, sending electricity to the two brake lights and the high-mounted brake light, completing the circuit via the negative line connected to the vehicle body.
9
0
Share

Can You Keep Driving When the Tire Warning Light Is On?

Tire warning light is on car can still continue to drive, but it is best to pull over safely and check the tires. If you have a tire pressure monitoring tool, you can check whether the tire pressure of all tires is normal. If you don't have a tire pressure detector, you can get off the car to check. Tires greatly affect driving safety. If a tire suddenly bursts while driving at high speed, the consequences will be unimaginable. The car tire pressure warning sign is shaped like a can with an exclamation mark inside. When the tire pressure in the tire changes, the tire pressure warning light will come on. The normal tire pressure is generally between 230 and 250 kPa. The specific tire pressure standard can be found in the user manual. Tires need the correct air pressure value to work effectively. Too low or too high tire pressure is not good.
5
2
Share

Why Does Power Steering Fail?

Automobile steering system is a power steering system, the so-called power steering, that is, with the help of external force, so that the driver can complete the steering with less force. The symptoms of power steering include: heavy steering, steering noise, steering system oil leakage, poor steering wheel return ability, etc. Fault causes and solutions for heavy steering: The power steering system contains a large amount of air, resulting in abnormal steering. Foreign matter in the steering hydraulic pipeline causes the steering pump flow control valve to stick. Check the steering gear, steering pump control valve, oil cup filter, steering oil, and clean the entire power steering system. Looseness in the connection parts of the power steering system causes steering fluid leakage. Check all connection parts of the oil pipe and tighten all connection bolts. Excessive wear of the steering gear piston cylinder, poor sealing of the oil seal, sticking or damage of the control valve. Replace the oil pipe, power steering pump or power steering gear. Fault causes and solutions for steering noise: Overload operation of the steering system causes excessive wear of the stator and rotor inside the steering pump, resulting in irregular movement of the oil in the pump and noise. Clean the entire steering system. Looseness in the installation of the steering gear and steering pump on the bracket, internal wear of the steering gear and improper adjustment of the gear and rack. Adjust the gear and rack clearance of the steering gear according to the regulations. Fault causes and solutions for steering system oil leakage: The steering pump will not leak oil without damage. However, it is still necessary to check the connectors and connection parts in the power system and steering system to see if there is any leakage. Check the oil pipe, oil cup, steering gear and power steering pump in the steering system.
18
4
Share

How to solve the abnormal noise of 2020 Mazda CX4?

2020 Mazda CX4 abnormal noise solution is to go to the 4S shop for detection and repair, specific inspection is needed to determine the source of the abnormal noise. Mazda CX4: The 2020 Mazda CX4 is a compact coupe SUV launched by FAW Mazda, which is a mass-produced version of the "KOERU" concept car. Appearance: The avant-garde design of the 2020 Mazda CX4 is full of modernity, with sharp headlights and a unique grille organically connected, making the front face domineering. The rear shape is simple and well-proportioned, with clear layers, highlighting the driver's unconventional inner quality. The 2020 Mazda CX4 is equipped with a 2.0 naturally aspirated engine, with a maximum horsepower of 158Ps. The mature 6-speed automatic manual transmission is powerful enough, and the efficiency and stability of gear shifting are satisfactory.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.