What to Do If You Fail the Subject 4 Exam?

What colors are available for the Jetta VA3?

Jetta VA3 comes in Polar White, Maya Red, Moonlight Silver, Seashell Gold, and Sapphire Blue. Below are the detailed specifications of the Jetta VA3: 1. The Jetta VA3 is a compact family sedan with dimensions of 4501mm in length, 1704mm in width, 1469mm in height, and a wheelbase of 2604mm. 2. The Jetta VA3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 82kW and a maximum torque of 145Nm. The engine reaches its peak power at 6100 rpm and peak torque at 4000 rpm. It features DVVT technology and multi-point fuel injection, with an aluminum alloy cylinder head and block. The engine is paired with either a 5-speed manual transmission or a 6-speed automatic transmission. 3. The front suspension of the Jetta VA3 uses a MacPherson strut setup, while the rear suspension employs a torsion beam. Most compact or small cars use torsion beam rear suspensions due to their lower cost, compact size, and space efficiency. This setup also helps maximize rear passenger and trunk space.

15

4

Share

Where is the cabin air filter located in the Great Wall Haval H6?

The cabin air filter in the Haval H6 is located on the passenger side, beneath the glove compartment near the center console. You can see it by looking up from the floor - the arrow indicates the filter's clip, which consists of three clips in total. Gently pull outward to open it, and you'll find the cabin air filter inside. Below are the steps to replace the cabin air filter: 1. To replace the cabin air filter, first open the glove compartment cover. Locate the fixing clip on the right side of the glove compartment and pull it outward firmly. Remove the fixing clip of the glove compartment cover to detach it. Then, squeeze both sides of the glove compartment towards the center with both hands, and the glove compartment can be taken off. 2. After removing the glove compartment, you will see the cabin air filter cover. Press firmly on the fixing clips on both sides of the cover, and the cover can be removed. 3. Pull the old cabin air filter outward. Install the new cabin air filter and reassemble everything in the reverse order of disassembly (pay attention to the installation direction of the cabin air filter).

12

2

Share

How to Install the Camshaft on a Chevrolet Cruze?

Before installing the camshaft, first lubricate the camshaft with new engine oil, and also lubricate the camshaft bearing seats. The installation method for the Chevrolet Cruze camshaft is as follows: 1. Before installing the camshaft, first install each bearing cap and check if the camshaft holes are misaligned; 2. When installing the camshaft, the camshaft of cylinder 1 must face upwards and not press against the valves; 3. After installing the bearing caps, first alternately tighten the bearing caps of the 2nd and 5th paths diagonally to a torque of 20Nm, then install the bearing caps of the 1st and 3rd paths, and finally install the bearing cap of the 4th path. Tighten all bearing cap bolts to a torque of 20Nm; 4. Install the camshaft oil seal, then install the camshaft half-moon key and timing gear, and tighten the bolts to a torque of 80Nm.

5

3

Share

Can a Motorcycle with Modified Graphics Be Licensed?

Illegal modifications are not permitted, but some modifications are allowed, such as high-performance spark plugs, qualified xenon headlights, body stickers, handlebar guards, license plate frames, color changes, and LED lights. Unauthorized external modifications to motor vehicles cannot be licensed. To modify the external appearance of a motor vehicle, prior application and filing are required before the vehicle can be licensed. Article 16 stipulates: No unit or individual may alter the registered structure, construction, or characteristics of a motor vehicle without authorization. It is prohibited to change the model number, engine number, frame number, or vehicle identification number of a motor vehicle. Common illegal modifications for motorcycles include: Exterior modifications: Unauthorized changes to the body color; raised and lengthened backrests; unauthorized installation of sidecars; and overly exaggerated or unconventional modifications. Lighting modifications: Unauthorized installation of spotlights, strobe lights, or excessively bright headlights. Exhaust modifications: Modified exhaust pipes that produce excessive noise, disturb the public, or have exaggerated appearances. Horn modifications: Unauthorized installation of air horns, significantly increased decibel levels, or imitation of sirens used by police, fire trucks, ambulances, or other special vehicles.

9

4

Share

What does the wrench exclamation mark light mean?

There are five situations when an exclamation mark appears on the car dashboard: general faults, automatic transmission faults, brake system faults, abnormal tire pressure, and lighting faults. The following is a detailed analysis of these five situations: General faults: A triangle with an exclamation mark inside indicates that the car's general performance, components, or functions have malfunctioned. Common issues include parking sensor failure, fuel cut-off system intervention or malfunction, external light failure, engine oil pressure sensor failure, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating that there is a fault in the transmission or the transmission lubricant is below the normal range. The transmission oil should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. The brake system should be inspected immediately to avoid accidents. Abnormal tire pressure: A horizontal line under parentheses with an exclamation mark in the middle represents the tire pressure monitoring warning light. This light will illuminate when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, indicating that a car light has malfunctioned. Solution: Visit a 4S shop for inspection and repair as soon as possible. You can also perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the problem.

3

2

Share

What is the fuel consumption per 100 kilometers for the Sylphy?

The Sylphy has a total of 11 models currently on sale. Among them, the 2022 Sylphy e-POWER Ultra, Pro, PLUS, and MAX models, equipped with a 72-horsepower engine, have an NEDC fuel consumption of 3.9L per 100 kilometers. The 2022 Sylphy Classic 1.6XL-CVT Luxury, Comfort, and 1.6XE Manual Comfort models, equipped with a 122-horsepower engine, have an NEDC fuel consumption of 5.2-6.1L per 100 kilometers. The 2022 Sylphy 1.6L-XL-CVT Enjoy, Premium, 1.6XE-CVT Comfort, and TOP-CVT Luxury models, equipped with a 135-horsepower engine, have an NEDC fuel consumption of 4.9-5.3L per 100 kilometers. The fuel tank capacity varies among different models of the Sylphy. The distance that can be covered with a full tank of fuel is as follows: Models equipped with a 72-horsepower engine have a fuel tank capacity of 41L, allowing a distance of 41/3.9*100=1051km on a full tank. Models equipped with a 122-horsepower engine have a fuel tank capacity of 50L, allowing a distance of 819-962km on a full tank. Models equipped with a 165-horsepower engine have a fuel tank capacity of 47L, allowing a distance of 887-1022km on a full tank. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase fuel consumption are as follows: Driving habits: Aggressive driving, such as rapid acceleration, frequent overtaking, and not easing off the throttle before a red light, can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements typically require more power and thus more gasoline to burn. Heavier cars also consume more fuel because greater weight requires more driving torque. Road conditions: Driving on dirt roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases the car's resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not atomize easily during a cold start, requiring more gasoline to burn, which increases fuel consumption. Additionally, in low temperatures, the engine's computer may control the engine to run at higher RPMs to warm up, further increasing fuel consumption.

7

0

Share

What to Do If You Fail the Subject 4 Exam?

What colors are available for the Jetta VA3?

Where is the cabin air filter located in the Great Wall Haval H6?

How to Install the Camshaft on a Chevrolet Cruze?

Can a Motorcycle with Modified Graphics Be Licensed?

What does the wrench exclamation mark light mean?

What is the fuel consumption per 100 kilometers for the Sylphy?

Does Downshifting with Paddle Shifters Damage the Car?

How to Sit in the Back Seat of a Camaro?

What are the basic items to check in the engine compartment?

How many gears does the Ninja 350 have?