···
Log in / Register

What to Do If You Fail the Subject 1 Test 6 Times?

6Answers
MilesAnn
08/29/2025, 11:57:10 PM

If you fail the Subject 1 test 6 times, you can still continue to schedule the test. Since failing Subject 1 means you have not obtained the driving skill test permit, it is equivalent to not having successfully applied, and you can keep applying until you pass. There is no limit to the number of attempts for Subject 1 and Subject 4. Below is additional information: Relevant regulations: For the initial application for a motor vehicle driver's license or applying to add a permitted driving type, after passing the Subject 1 test, the vehicle management office should issue the driving skill test permit within one day. The driving skill test permit is valid for three years, and the applicant must complete the Subject 2 and Subject 3 tests within the validity period. If the tests are not completed within the validity period, the passed subject scores will be invalidated.

Was this review help?
118
Share
DiCalvin
09/11/2025, 04:00:31 AM

I totally understand failing the written driving test multiple times, as I also failed three times when first getting my license. The issue was my study method - I didn't seriously study traffic rules, only reviewing partial questions each time. Later I improved by spending one hour daily practicing on the driving test app, separately organizing and reviewing frequently missed questions like drunk driving regulations and safe distances. Before doing question banks, I watched short explanatory videos to reinforce understanding. Before my sixth attempt, I took five consecutive mock tests scoring over 90 before going to the exam center, and passed easily. Remember systematic review is key - don't just memorize mechanically, try applying rules to real-life scenarios like recalling knowledge points when seeing road signs. Everyone learns at different paces - persist and you'll succeed. Don't treat the test as a burden, but as a growth opportunity.

Was this review help?
20
Share
Expand All
SimonFitz
10/25/2025, 10:02:26 PM

Exam failure may be due to psychological factors. I didn't pass my driving theory test (Subject 1) the first two times because I was too nervous and my hands were shaking. I think adjusting your mindset is crucial—like taking deep breaths and simulating the exam environment in advance by sitting quietly at home and timing your answers. When the pressure gets too high, take a break, go for a walk, or listen to some light music. I also found that sufficient sleep greatly aids memory, so I made sure to get seven to eight hours of rest each night. Before my sixth attempt, I told myself it was just a test, and as a result, I felt much calmer. The Subject 1 question bank actually follows certain patterns, and practicing more will help you get familiar with them. Don't lose heart, stay relaxed, and take it step by step—you'll get through it.

Was this review help?
1
Share
Expand All
SanIsabel
12/08/2025, 09:22:03 PM

Try using some tools, such as downloading the 'Driving Test YDT' or 'Yuanbei Driving Test' apps. Their question banks are updated quickly and include explanations for wrong answers. I failed five times before relying on them for practice—doing a fixed set daily, starting with sign recognition exercises before tackling the regulation sections. The apps feature mock exams; after several test runs, identify weak points and focus on them—it's quite efficient.

Was this review help?
17
Share
Expand All
GraceLee
01/28/2026, 10:33:02 PM

Seek external help. When I failed the driving theory test four times, I talked to my instructor, who pointed out my unclear understanding of turning rules. It's advisable to consult driving school teachers or friends with licenses to identify blind spots. During the exam, don't rush—read each question carefully before answering. Similar failures taught me a lesson, and now I drive steadily.

Was this review help?
1
Share
Expand All
ClaraFitz
04/24/2026, 03:06:23 AM

In the long run, failing the theory test isn't a big deal. It took me seven attempts to pass, and I later realized I hadn't invested enough time initially. Integrate revision into daily life, like studying traffic signs and rules during bus rides. Persistent practice with proper breaks helped – after the sixth try, I took a two-month break to regain confidence. Getting a driver's license is just the first step; stay calm and success will follow naturally.

Was this review help?
14
Share
Expand All
More Q&A

What is the full name and meaning of BMW?

BMW stands for Bavarian Motor Work, which refers to Bayerische Motoren Werke AG, known as BMW in mainland China, Hong Kong, and Macau. Below is additional information: 1. Creator: BMW's founder, Karl Friedrich Rapp, established Rapp Motorenwerke on April 29, 1913, using a factory that originally manufactured bicycles to produce aircraft engines; 2. Development: Gustav Otto co-founded Bayerische Flugzeugwerke on March 7, 1916, and merged the three-year-old factory into this new company. On July 20, 1917, the factory was renamed Bayerische Motoren Werke GmbH.
114
Share

Does the starter work in the ACC position?

ACC position starter does not work. The following are the relevant information about ACC: Basic introduction: The meanings of the ignition switch positions are LOCK - steering wheel locked, power supply cut off; ACC and ON - all vehicle power supply except the starter is connected; START - starter power supply is connected and the engine starts. Function: It is a system switch that requires a key to operate, mainly controlling circuits that can freely turn on or off the ignition coil, and can also be used for other electrical circuits. It should be noted that before starting, the transmission should be placed in neutral, the clutch pedal should be depressed, and for vehicles with automatic transmission, the gear should be placed in P or N position.
116
Share

How often is vehicle annual inspection required?

Regarding vehicle annual inspection, the relevant information is as follows: 1. For passenger transport vehicles, inspection is required once a year within the first 5 years; after 5 years, inspection is required every 6 months. 2. For trucks and large/medium-sized non-passenger transport vehicles, inspection is required once a year within the first 10 years; after 10 years, inspection is required every 6 months. 3. For small and mini non-passenger transport vehicles, inspection is required once every 2 years within the first 6 years; after 6 years, inspection is required once a year; after 15 years, inspection is required every 6 months. 4. For motorcycles, inspection is required once every 2 years within the first 4 years; after 4 years, inspection is required once a year. 5. For tractors and other motor vehicles, inspection is required once a year.
117
Share

How to Solve the Non-Response Issue of Fengguang 580 One-Key Start?

Fengguang 580 one-key start failure may be caused by: 1. Low battery in the smart key: If the key is inside the car but the dashboard displays a key matching error, it is likely due to a low battery in the smart key. The start system cannot detect the weak signal emitted by the key. It is recommended to place the smart key directly on the start button and then press the button to start. 2. Steering wheel lock: The steering wheel lock is an anti-theft feature. When the car is turned off, turning the steering wheel from the straight position to a certain angle in one direction will lock the steering wheel. In the locked state, the one-key start function will not work. To release the lock, turn the steering wheel left and right while pressing the engine start button to relieve the tension and unlock the steering wheel.
110
Share

What brand are the tires on the Lexus ES?

The new Lexus ES comes equipped with Yokohama DB series tires, also known as Yokohama. Tires are one of the most important components of a vehicle, primarily responsible for supporting the vehicle's entire weight, bearing the load, and transmitting forces and moments in other directions. Here is more information about automotive tires: 1. Automotive tires are crucial components that directly contact the road surface, working in conjunction with the vehicle's suspension to absorb shocks during driving, ensuring good ride comfort and smoothness. They also maintain strong adhesion between the wheels and the road, improving traction, braking, and off-road capability. As tires bear the vehicle's weight, their importance is increasingly recognized. 2. To avoid abnormal wear, consider the following precautions: a. Monitor tire pressure: Pressure is critical to tire life. Both overinflation and underinflation shorten lifespan. Underinflation increases tire deformation, leading to sidewall cracks, excessive flexing, overheating, rubber aging, and ply fatigue. It also enlarges the contact area, accelerating shoulder wear. Overinflation overstretches the tire cords, reducing elasticity and increasing load during driving, which may cause internal cracks or blowouts. It also accelerates tread wear and reduces puncture resistance. b. Regularly check front-wheel alignment: Alignment significantly affects tire life, with toe-in and camber being key factors. Incorrect camber accelerates shoulder wear, while improper toe-in causes uneven inner or outer tread wear. c. Adjust driving habits: Avoid sharp objects like stones, glass, or metal that may puncture or cut tires. Steer clear of chemical spills that could adhere to and corrode tires. On highly cambered roads, drive centrally to prevent uneven wear from excessive one-sided load. Overloading by 20% reduces tire life by 30%, and by 40% cuts it by 50%. Additionally, sharp turns, hard braking, rapid starts, and sudden acceleration negatively impact tire durability.
102
Share

How to Remove the Wiper Blades on Honda XR-V?

Honda XR-V wiper blade removal steps are as follows: 1. First lift the driver-side wiper arm, then lift the passenger-side wiper arm; 2. Press the locking tab and slide the blade out of the wiper arm; 3. Pull the tab end and slide the blade out of the bracket to complete removal. Other methods for Honda XR-V wiper blade removal are detailed below: 1. First, fully raise the wiper arms. To avoid damaging the windshield during removal, it is recommended to place a cloth on the windshield and adjust the blade angle by propping up the wiper arm. 2. Next, change the blade angle to approximately 90 degrees relative to the wiper arm. Since the blade assembly is secured to the arm with a clip, this angled position facilitates removal. 3. After positioning, begin removal by lifting the rubber blade with one hand to expose the fixing hook between the arm and blade. With the other hand, push down firmly on the main bracket while pulling the rubber blade sideways to separate it from the arm, allowing complete removal of the wiper blade assembly.
115
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.