What to Do If You Fail the Driving Test Five Times in Subjects 2 and 3?

2 Answers
VonHope
07/28/25 6:31pm
Solutions for failing the driving test five times in Subjects 2 and 3 are as follows: 1. Identify the specific reasons for failure: Some people ignore the details mentioned by the coach during practice, leading to failure in each official test. Therefore, it is essential to clearly understand the specific reasons for your failure, whether it is due to not mastering the test details. 2. Targeted solutions: After identifying the specific issues causing your test failure, find detailed solutions one by one. During practice, consciously avoid these mistakes. If necessary, carry a notebook to record errors during practice, so you won't be afraid during the official test.
Was this review help?
8
4
Share
VanAvery
08/12/25 12:08am
I once went through the days of failing my driver's license test five times. After each attempt at Subject 2 and Subject 3, I felt particularly frustrated, thinking I would never get my license in this lifetime. But later, I realized that the failures weren't due to technical issues but rather to nervousness causing mistakes in details. I started learning from a different instructor, waking up early every day to practice an extra hour at the driving school, focusing on my weakest areas like reverse parking and parallel parking. Before the test, I learned to take deep breaths and stay focused on the present moment, and I even had friends simulate the test scenario, which greatly reduced my stress. A few months later, I finally passed, and now whenever I drive, I recall those tough times. My advice is: don't rush, first reflect on the reasons for failure, find someone new to teach you different methods, practice thoroughly before retaking the test, and persistence will lead to a turnaround.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

Does the BMW 5 Series have a six-cylinder engine?

BMW 5 Series is equipped with a 6-cylinder engine. Here is the extended content: Examples of BMW 5 Series models with 6-cylinder engines: The BMW 540 model uses a 3.0-liter six-cylinder turbocharged engine. This engine can deliver maximum power at 5500 to 6500 rpm and maximum torque at 1380 to 5200 rpm. It is paired with an 8AT transmission from ZF. Introduction to the BMW 540: The BMW 540 is a mid-size luxury sedan with body dimensions of 5087mm in length, 1868mm in width, and 1500mm in height, and a wheelbase of 3108mm.
3
1
Share

What is the tire model of the Cerato?

The tire models for the Cerato are 205/50R16 and 195/60R15. In the 205/50R16 specification, 205 indicates the tire width in millimeters, 50 represents the aspect ratio (50%), R denotes radial construction, and 16 signifies the rim diameter in inches. The Cerato is a compact car under the Kia brand, equipped with two engine options: a 1.6-liter naturally aspirated engine producing 112 horsepower and 145 Nm of torque, and a 1.8-liter naturally aspirated engine.
10
0
Share

What brand is the Lynk & Co 02?

Lynk & Co 02 is a model under the Lynk & Co brand, which is an independent brand. Lynk & Co is an automotive brand jointly established by Geely and Volvo, integrating European technology, design, manufacturing, and sales. All product development is based on Volvo's Compact Modular Architecture (CMA) platform. As the second model of the Lynk & Co brand, the Lynk & Co 02 is positioned as a high-energy coupe SUV. Its exterior features an urban skyline front face, integrated headlight and grille design, and split-type headlights. The car's center console is equipped with a 10.25-inch touchscreen integrating functions such as reverse camera and GPS navigation. It is powered by a 2.0TD engine paired with either a 6AT transmission or a 7DCT wet dual-clutch transmission.
9
5
Share

Is the fuel tank cap of a BMW on the left or right side?

Right side. 1. Avoid overfilling the fuel tank: When the fuel tank is overfilled, gasoline may overflow through the vent hole, which can lead to spontaneous combustion if exposed to an open flame, with potentially disastrous consequences. Gasoline overflowing through the vent hole can also drip onto the car body, causing some corrosion. Additionally, overfilling can easily clog the fuel tank vent hole. Excess gasoline increases the vehicle's weight, thereby increasing fuel consumption. 2. Try to avoid refueling only when the fuel warning light comes on: While driving, always pay attention to the fuel gauge. When the indicator shows only a quarter of the tank remaining, you should refuel. If the fuel tank remains empty for too long, the temperature difference between the inside and outside can cause moisture to form inside the tank, leading to corrosion, affecting fuel quality, and increasing the engine's burden. 3. Choose the right time to refuel: Avoid refueling at noon due to thermal expansion and contraction. Gasoline volume increases with rising temperatures and decreases when temperatures drop. Since fuel is sold by volume, to save money, try to refuel in the early morning or evening. Also, choose larger gas stations for refueling and avoid refueling if a fuel tanker truck is parked at the station.
19
5
Share

What are the adverse consequences of continuously using the service brake on long downhill slopes?

Continuously using the service brake on long downhill slopes can lead to adverse consequences: it causes the brake temperature to rise, resulting in a sharp decline in braking effectiveness. If the brake is continuously applied on a long downhill slope, the brake pads will overheat, leading to reduced braking force. In severe cases, this can result in a complete loss of braking ability, causing brake failure. Therefore, when descending a long slope, it is advisable to use a lower gear and employ engine braking. Engine braking refers to lifting the accelerator pedal without depressing the clutch, utilizing the compression resistance generated by the engine's compression stroke. This creates internal friction and intake/exhaust resistance, which applies a braking effect on the drive wheels. Simply put, it means driving in gear without supplying fuel, so the engine no longer provides traction to the vehicle.
6
2
Share

What is the method for car touch-up painting?

Methods for car touch-up painting: 1. Clean the scratched area thoroughly; 2. Prepare a touch-up paint kit, soak the sandpaper in water, and wrap it around a hard cotton block; 3. Use the wrapped sandpaper to sand the scratched area until it feels level with the surrounding paint when touched by hand; 4. Use tape and cloth to cover areas that do not need touch-up painting; 5. Prepare a touch-up pen and a mini spray can, and assemble them together; 6. Start spraying the paint from a certain distance from the scratch. The sprayed paint will make the car's paint smoother. Spray back and forth, avoiding concentrated spraying in one spot, until the color covers the black area; 7. After the paint dries, prepare blending clear coat, which helps the touched-up paint color blend better with the car's original color and protects the touched-up paint; 8. Assemble the blending clear coat on the mini spray can, maintain a certain distance from the car, and spray it back and forth on the touched-up area, avoiding areas that were not touched up; 9. Wait a moment, and the touch-up painting is complete.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.