What to Do If You Fail the Driver's License Physical Examination?

What is the Feidai brand car?

Feidai is a Chinese independent automobile brand headquartered in Zhejiang Province, primarily manufacturing commercial vehicles, special-purpose vehicles, and new energy vehicles. The Feidai model is a microvan pure electric vehicle with dimensions of 4455mm in length, 1640mm in width, and 1970mm in height, featuring a wheelbase of 2870mm and front/rear tire specifications of 185/65R15. It is equipped with a single-speed transmission for electric vehicles, utilizing lithium iron phosphate batteries and a fixed gear ratio transmission. For suspension, this vehicle adopts MacPherson strut independent suspension at the front and leaf spring non-independent suspension at the rear.

20

5

Share

How to Solve the Problem of Tail Lights Staying On?

Solutions for tail lights staying on: The issue of tail lights staying on may be caused by a damaged brake light switch on the brake pedal or a short circuit in the brake light wiring. Remove the protective panel located above the brake, clutch, and accelerator to expose the brake light switch. Rotate the faulty switch counterclockwise to remove it, then replace it with a new brake light switch. Car tail lights include the lamps and bulbs at the rear of the vehicle. The function of the lamps is to gather and emit the light from the bulbs, thereby enhancing the brightness and range of the light emitted. Car tail lights consist of turn signals, brake lights, position lights, rear fog lights, reverse lights, and parking lights. Among these, the turn signals and brake lights are symmetrical, with one on each side.

20

3

Share

Are there any tips for driving at night?

Tips for driving at night: 1. It is necessary to control the speed reasonably, use the car lights flexibly and appropriately, maintain a proper following distance from the vehicle ahead, and avoid frequent overtaking when visibility is not as good at night; 2. When driving on the highway at night, high beams should be used because highways are not equipped with street lights, and vehicles on highways travel at high speeds. Some drivers may not react in time to emergencies. High beams provide strong light, which helps drivers react promptly. Highways have median barriers, so there is no direct contact with oncoming vehicles, eliminating the need to worry too much about them. Moreover, using high beams helps drivers better observe the condition of vehicles ahead. Night driving can be tiring, so when driving on highways at night, the speed should not be too fast, but it should also not be lower than 80 kilometers per hour.

16

1

Share

How many lighting items are there in Subject 3?

Subject 3 includes five lighting items: low beam, high beam, alternating between high and low beams, width indicator lights, and hazard warning lights. During the lighting simulation test, when you hear the voice prompt indicating the start of the lighting test, turn on the main lighting switch. Upon hearing each lighting instruction, you must perform the corresponding operation within 5 seconds after the instruction ends. After the lighting test is completed, turn off all lights. Failing the lighting test results in failing the entire Subject 3 exam, and you will have to wait for a second attempt. The test items for Subject 3 include: preparation before starting, lighting simulation test, starting off, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, etc.

20

4

Share

Where is the OBD interface located on the Lifan 320?

The OBD interface of the Lifan 320 is located below the left side of the steering wheel, near the driver's knee area. After removing the cover in this section, you can see the OBD interface. OBD refers to the On-Board Diagnostics system, which monitors the vehicle's exhaust emissions in real-time through the engine's operating conditions and issues an immediate warning if they exceed the standard. The Lifan 320 is the first mini-car developed by Lifan Motors. The dimensions of this car are 3745mm in length, 1620mm in width, and 1430mm in height, with a wheelbase of 2340mm. In terms of suspension, the front suspension of the Lifan 320 is a MacPherson strut with a stabilizer bar, and the rear suspension is also a MacPherson strut with a stabilizer bar.

2

4

Share

Where is the engine number of Mazda6 located?

Mazda6's engine number is located on the side of the engine block. The engine number contains information such as the engine model, production time, and origin code, and is unique, with each engine having a specific number. The engine number is an important piece of vehicle information, facilitating the management of the vehicle's engine by both the engine manufacturer and the vehicle management department. The Mazda6 is a mid-sized car under FAW Mazda, with dimensions of 4670mm in length, 1780mm in width, and 1435mm in height, and a wheelbase of 2675mm. The front bumper and chrome-plated winged grille of this car adopt Mazda's coupe-style design, and the door anti-scratch strips have been removed.

15

2

Share

What to Do If You Fail the Driver's License Physical Examination?

What is the Feidai brand car?

How to Solve the Problem of Tail Lights Staying On?

Are there any tips for driving at night?

How many lighting items are there in Subject 3?

Where is the OBD interface located on the Lifan 320?

Where is the engine number of Mazda6 located?

What is the battery model for the Mazda CX4 key?

What Causes the Engine Warning Light to Illuminate in a Mazda6?

How to Replace the Key Battery for Mazda6?

What is the brand of the Mazda CX4 transmission?