What to Do If You Don't Have an ID Card for the Driving Test Subject 3?

What Causes Loud Noise When the Car Fan Runs at High Speed?

Car cooling fan noise is loud because the fan blades are deformed. Solution: Replacing a single blade or the entire fan can resolve the issue. If after parking, components inside the engine such as the cylinder and piston rings, crankshaft and connecting rods, etc., may 'stick' together due to high temperatures. Upon the next startup, there might be a phenomenon of tightness, commonly referred to as 'cylinder seizure or bearing failure'. High-quality fans are designed with oil holes above the front and rear bearings of the motor, allowing direct dripping of car or motorcycle lubricating oil. Generally, oil should be added once a year, with about ten drops each time. Reasons for loud noise: Frequent stop-and-go driving can cause the engine to overheat, triggering the fan as a safety protection measure. However, if this occurs at high speeds, it is abnormal. If there is vibration noise, the fan should be replaced. Many Volkswagen models now use a single fan, so the noise during high-speed operation is naturally louder than usual.

8

5

Share

What does BMW MAX mean?

In fact, MAX in automobiles mainly has two meanings: 1. MAX button: Generally, a button with MAX indicates that pressing this button will activate the function at maximum power. For example, the most common air conditioning snowflake button with MAX means that pressing it will make the air conditioning operate at maximum cooling power. There is also the front windshield defrost MAX button, pressing which indicates the vehicle will perform the front windshield defrost function at maximum power. 2. MAX marking: This situation usually involves MAX appearing alongside MIN. In vehicles, it generally means that the fluid level should be between the upper limit MAX and the lower limit MIN. For example, after pulling out the most common oil dipstick, there are usually MAX and MIN markings, indicating that the normal oil level should be between the upper limit MAX and the lower limit MIN. The same applies to power steering fluid; after opening, there will also be MAX and MIN markings, and when refilling, it is necessary to ensure that the power steering fluid level is between the upper and lower limits.

6

0

Share

What transmission does the new Renegade use?

The new Renegade is equipped with two types of transmissions: a 7-speed dual-clutch transmission and a 9-speed automatic manual transmission. The dimensions of the currently available Renegade models are 4240mm in length, 1805mm in width, and 1690mm in height, with a wheelbase of 2570mm. The Renegade is positioned as a compact SUV, with the current models available in both two-wheel drive and four-wheel drive versions. The four-wheel drive version adopts a front four-wheel drive system with an on-demand four-wheel drive configuration, featuring a multi-clutch center differential. The currently available Renegade models are powered by three engine options: 1.3T, 1.4T, and 2.0L.

9

3

Share

Should you use one foot or two feet for the accelerator and brake?

Use one foot for control. Manual transmission vehicles have three control pedals, while automatic transmission vehicles have two control pedals. In both cases, the brake pedal and accelerator pedal are placed on the same side and are controlled by the right foot. Automatic transmission vehicles: The leftmost pedal is the brake, and the rightmost is the accelerator. Automatic transmission vehicles do not require manual gear shifting as the car shifts gears automatically, so there is no clutch pedal, only the accelerator and brake, both adjusted by the right foot. During driving, the left foot should not be placed on the brake pedal. Manual transmission vehicles: The middle pedal is the brake, and the rightmost is the accelerator. Manual transmission vehicles have three pedals, arranged from left to right as follows: clutch pedal, brake pedal, and accelerator pedal. For manual transmission vehicles, the left foot is only used to press the clutch pedal when shifting gears; during normal driving, the left foot should not be placed on any pedal. Both the brake and accelerator are controlled by the right foot.

7

3

Share

What are the channels for purchasing used cars?

There are several channels for purchasing used cars, including storefront purchases, 4S dealerships, and repair shops. Storefront Purchase: Generally, used car dealers choose to set up stores in areas with high concentrations of used car transactions, as these locations naturally attract customers. 4S Dealership Purchase: Purchasing vehicles from new car dealerships like 4S stores. Many 4S stores claim to engage in used car businesses but actually lack the capability to purchase them. Once the used cars are acquired, they are directly transferred to the used car market, where dealers buy and resell them. Repair Shop Purchase: Repair shops, tire stores, and insurance companies are the places that interact most with car owners. Many owners decide to sell their cars due to high maintenance costs, so used car dealers maintain connections with these businesses to obtain used car sources. Online and Newspaper Information: Advertising through online and newspaper channels is relatively costly. Nowadays, there are many professional used car websites that provide information on used cars.

9

1

Share

Can Rust Remover Be Sprayed on Car Paint?

No. Automotive rust remover can damage car paint. Small rust spots are caused by acid rain corrosion, and it is recommended to use car wax. Any car wax can easily solve the problem. Nano Coating Maintenance: After applying nano coating, the car paint can prevent scratches, block UV rays, and its excellent flexibility prevents paint cracking. It accelerates water droplet runoff, preventing water droplet lens effects, stains, and oxidation spots. Waxing Maintenance: Waxing is the most well-known method of car paint maintenance. Most car wash services offer waxing. After waxing, it provides a certain level of protection for the car paint for a short period. Glaze Sealing Maintenance: Glaze sealing primarily uses high-molecular polymers and petroleum-based solvents as main ingredients. It is pressed into the paint using a polishing machine, forming a mesh structure that enhances the strength and hardness of the car paint. For a certain period, it protects the paint from minor scratches. Additionally, the "glaze" is waterproof, feels smooth, and lasts longer than waxing.

12

1

Share

What to Do If You Don't Have an ID Card for the Driving Test Subject 3?

What Causes Loud Noise When the Car Fan Runs at High Speed?

What does BMW MAX mean?

What transmission does the new Renegade use?

Should you use one foot or two feet for the accelerator and brake?

What are the channels for purchasing used cars?

Can Rust Remover Be Sprayed on Car Paint?

What are the button instructions for the new CS75?

Will the car key be damaged if soaked in the washing machine?

Can a small area of the bumper be repainted?

Which province does the license plate 'Min D' belong to?