What to Do If You Can't Remember the Route for Subject 3?

2 Answers
Francis
07/25/25 1:01pm
When practicing at the test site, you can use paper to note down the sequence of road sections, such as straight-line driving first, followed by traffic lights, and then deceleration zones. At the same time, you can memorize some obvious landmarks along the route, such as signs, etc. Walk the route at the test site to remember the order of driving tasks, and pay special attention to turns, U-turns, and sections without voice prompts.
Was this review help?
14
2
Share
MaddoxLynn
08/11/25 8:33pm
When I first started taking the driving test, I couldn’t remember the route for Subject 3, which was really frustrating. Later, my instructor told me to practice the same route at least three times a day, focusing on memorizing key landmarks, such as the turning points at intersections, the stopping spots before bus stops, and the speed limit signs in school zones. Each practice session felt like playing a game—staying focused kept me from getting distracted. On weekends, I even brought friends along to simulate driving on the test route, repeating it over and over. After two weeks of persistence, I had it memorized. The night before the test, I closed my eyes and visualized the entire route process, and the next day, I passed with ease. The secret is to practice more, study the map, and not fear failure. Once you remember the details, the test will go smoothly.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What is the method to adjust the large gap of the Camry hood?

Open the hood to effectively adjust the direction of airflow during vehicle movement and the resistance force acting on the car through the hood's shape. There are black rubber blocks on both sides of the radiator frame, which serve to support the hood. They provide protection in case of hood malfunction. Rotate the black rubber blocks by hand to adjust the gap between the hood and the grille. You can also have it repaired at a maintenance shop. There are two U-shaped tabs on each side of the hood. Remove the plastic clips on top.
16
0
Share

How to Operate the Automatic High/Low Beam on Camry?

Switch is integrated on the light control stalk, which is the outermost knob on the left stalk of the steering wheel. You can turn it to the AUTO button, which is the automatic headlight mode. After switching to this position, the turning on and off of the headlights can be left to the car. The car is also equipped with an automatic high beam module. This function allows the car to automatically turn the high beams on and off while driving with the headlights on. It should be noted that some friends may find that the headlights are still on even in broad daylight, in which case the sensor needs to be checked to see if it is blocked.
10
2
Share

What type of fire extinguisher should be used for an engine fire?

For engine fires, use a carbon dioxide fire extinguisher. Reasons for using a carbon dioxide fire extinguisher: It will not cause secondary short-circuit damage to electrical components and also prevents safety accidents caused by electrical leakage. Precautions for using a carbon dioxide fire extinguisher: When using it, first pull out the safety pin before pressing the handle. Aim the nozzle at the base of the flames when discharging. Avoid direct contact between the spray tube or hose and the skin to prevent injury. When using outdoors, discharge from the upwind direction. When using in confined indoor spaces, the operator should leave quickly after extinguishing the fire to avoid suffocation.
12
4
Share

How to Shift Gears Without Pressing the Clutch?

Methods for shifting gears without using the clutch: 1. Before shifting, try to increase the engine speed to build up momentum, then quickly release the accelerator pedal while shifting the gear to neutral. Quickly move the gear lever to the next higher gear, applying a slight force to push the lever, and wait for the engine speed to drop. When the engine speed matches the transmission speed, the gear lever will smoothly engage into the higher gear as if being pulled in. 2. For upshifting: Release the accelerator—shift to neutral—pause for the engine speed to drop—engage the higher gear. 3. For downshifting: Release the accelerator—shift to neutral—press the accelerator to increase engine speed—engage the lower gear.
17
5
Share

How to Replace the Seat Belt on a Buick Excelle?

Locate the wiring under the car seat, find the sensor wire of the seat belt buckle, and remove it. Take off the seat cushion and remove the airbag. Find the seat cushion sensor inside the seat cushion and remove it. Install the new seat belt buckle onto the seat. Thread the bolt through the hole and insert it. Install the weight sensor onto the car seat. Attach the new retractor and tighten it with a wrench. Insert the seat belt completely and check if it locks properly. Reinstall the seat cushion onto the car seat and arrange the wiring at the bottom of the seat. Test the newly installed seat belt by pulling the strap to see if it retracts properly.
13
1
Share

How to Overcome Foot Trembling During the Driving Test?

In fact, it's not just one person who gets nervous; everyone feels tense during the test. So don't be afraid—moderate nervousness can help you stay focused. The test site is actually quite similar to the training area. Finding that sense of familiarity can help ease tension. The more you worry about something, the more likely it is to happen. During the test, just focus on the task at hand and avoid overthinking. Move your hands and feet freely in place or take small steps within a limited area. Letting your body move slightly can shift your attention to simpler things.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.