What to Do If You Can't Remember the Direction When Straightening the Steering Wheel?

Where is the Mercedes-Benz Tire Pressure Reset?

Mercedes-Benz tire pressure reset method is: 1. After turning on the ignition switch, press the multifunction button on the left side of the steering wheel to bring up the menu interface on the instrument panel; 2. Select the maintenance option, find the tire inflation pressure and press the OK button; 3. Find "Use current pressure as new standard value" and press the OK button. Below is a partial introduction to Mercedes-Benz vehicles: 1. Mercedes-Benz models include: Mercedes-Benz E-Class, Mercedes-Benz S-Class, Mercedes-Benz DLC, Mercedes-Benz A-Class, and Maybach. 2. Taking the 2021 Mercedes-Benz E-Class Sport as an example, its body dimensions are: length 5078mm, width 1860mm, height 1484mm, wheelbase 3079mm, and fuel tank capacity 66L.

15

3

Share

How to Drive an Automatic Transmission Car More Easily?

In general, just shift to D gear. The car stops when you press the brake, and you usually don't need to press the accelerator when starting at a traffic light—releasing the brake will make the car move slowly. Always keep your right foot ready to press the brake. Here are some specific tips: 1. Gear Shifting: No need to rush when shifting gears or press the clutch, making hill starts much simpler. Just remember not to release the brake randomly when temporarily stopping; if parking for a long time, shift to P gear. 2. Gear Changing: If waiting at a long red light, some cars may slightly shake when in D gear with the brake pressed. In such cases, you can shift to N gear for long waits and shift back to D gear when the countdown is almost over.

15

4

Share

Why is there still a clicking sound when there are no stones in the tires?

If there is a clicking sound from the tires without any stones, it is likely due to damaged car components, which need to be checked one by one. Damaged shock absorbers: When driving over potholes or uneven roads, if the wheels make a noticeable clicking sound and the car feels shaky or tilts, it is likely due to damaged shock absorbers that need immediate replacement. Otherwise, it will significantly affect the vehicle's damping performance and may even pose a risk of losing control. Damaged ball joints: The car's ball joint, also known as the universal joint, can produce a distinct clicking sound if damaged or worn out. Additionally, it can affect the stability of the vehicle.

10

5

Share

What are the reasons for noticeable engine idling vibration?

The reasons for noticeable engine idling vibration include severe carbon deposits, tire malfunctions, and aging engine mounts. The specific causes are as follows: Severe carbon deposits: Idling vibration can be caused by severe carbon deposits in the engine, issues with the ignition system, or unstable oil pressure. Tire malfunctions: High-speed vibration may result from excessively high or low tire pressure, abnormal tire wear, rim deformation, shock absorber failure, or tire imbalance issues. Aging engine mounts: Engine mounts act as the engine's shock absorption system, responsible for absorbing minor vibrations during operation. If the engine mounts are faulty, these vibrations can transfer to the steering wheel and the cabin, causing noticeable car vibration.

6

3

Share

What does it mean when both the EPC and engine lights turn yellow?

The solutions for when both the EPC and engine lights turn yellow are as follows: 1. Replace fuel: If there is an intake system fault, it is necessary to replace the fuel and clean the throttle body. 2. Clean carbon deposits: Remove carbon deposits from related parts and rewrite the ECU data. 3. Send for repair: Insufficient battery power can also cause the EPC warning light to illuminate. It is generally recommended to go to a 4S shop for inspection and maintenance. 4. Check fuel level: When the fuel level is insufficient, the EPC light will turn on, and the car cannot be started at this time. 5. Check gear position: When the gear position is incorrect, the car cannot be started, and the EPC light will also be on. Returning the gear to the correct position will solve the problem.

9

5

Share

Can Adding 97 Octane Gasoline Remedy the Use of Poor-Quality Gasoline?

Adding 97 octane gasoline cannot remedy the use of poor-quality gasoline. 1. Hazards: Poor-quality gasoline contains excessive impurities, which can cause severe damage to the vehicle and reduce engine performance. It will lead to a decrease in the car's power output, noticeable vibrations, and abnormal noises during idling. Additionally, poor-quality gasoline often lacks good anti-knock properties, making the engine prone to knocking. Over time, this will result in significant carbon buildup, increasing fuel consumption. In severe cases, it can also damage the catalytic converter. 2. Remedial Measures: It is necessary to completely remove the remaining gasoline from the fuel tank and refill with higher-quality gasoline. Furthermore, the fuel injectors and combustion chamber should be cleaned, and the fuel filter and fuel pump should be replaced to prevent clogging from excessive impurities.

17

1

Share

What to Do If You Can't Remember the Direction When Straightening the Steering Wheel?

Where is the Mercedes-Benz Tire Pressure Reset?

How to Drive an Automatic Transmission Car More Easily?

Why is there still a clicking sound when there are no stones in the tires?

What are the reasons for noticeable engine idling vibration?

What does it mean when both the EPC and engine lights turn yellow?

Can Adding 97 Octane Gasoline Remedy the Use of Poor-Quality Gasoline?

Can Long Scratches on the Windshield Be Repaired?

How to Use the Screen Mirroring Function in BMW X1?

What could be the reason for persistent knocking noise after replacing the upper strut mount?

Which manufacturer produces Junle tires?