What to Do If You Can't Locate the Source of Car Noise?

Is a Fire Extinguisher Mandatory in Vehicles?

Medium-sized and above passenger vehicles, as well as hazardous goods transport vehicles, must be equipped with fire extinguishers. Below are specific details regarding vehicle fire extinguisher requirements: 1. Choose between dry powder or water-based fire extinguishers: When purchasing a vehicle fire extinguisher, opt for a 1-3 kg model. Given the suboptimal storage conditions inside vehicles, dry powder or water-based fire extinguishers are recommended. 2. Usage guidelines: Before use, thoroughly shake the extinguisher several times to loosen the dry powder inside. Remove the safety pin, hold the nozzle (or support the base if it's a tubeless extinguisher), and aim at the base of the flame. Press the handle firmly to release the extinguishing agent.

19

4

Share

What to Do When a Dry Dual-Clutch Transmission Experiences Jerking?

You can use manual mode to reduce shift frequency, minimize friction, and lower heat generation. Reasons for jerking in a dry dual-clutch transmission: 1. Large gear ratio difference in low gears: Those who have driven manual transmissions know that when the engine speed is high, shifting from first to second gear can cause some jerking due to significant gear ratio changes. In automatic transmissions, the presence of a torque converter helps buffer the shift, resulting in relatively less jerking. However, dual-clutch transmissions lack a torque converter and can only mitigate this jerking by prolonging the semi-engaged state of the two clutch sets, which may still exhibit some level of jerkiness. 2. Mechanical limitations of dual-clutch transmissions: Due to the mechanical structure and principles of dual-clutch transmissions, two gears are always engaged simultaneously—one for power output and another prepared for shifting. While upshifting is very fast, downshifting tends to be slower.

6

5

Share

What is the principle of the coolant temperature sensor?

The engine ECU receives the signal from the coolant temperature sensor as a correction signal for fuel injection and ignition, and also uses it to control the coolant fan, air conditioning, etc., making its role significant. If the ECU receives a distorted signal from the coolant temperature sensor, it will severely affect the normal operation of the engine, and may even cause difficulty in starting the engine. Below is additional information: 1. ECU correction timing: The coolant temperature sensor is installed in the engine block water jacket or coolant pipeline, in contact with the coolant, to detect the engine's coolant temperature. After receiving this temperature signal, the ECU adjusts the fuel injection timing and ignition timing. 2. Function: When faults such as excessive vehicle load, water shortage, incorrect ignition timing, or non-rotating fan cause the coolant temperature to rise excessively, the engine body temperature will increase, preventing the engine from operating properly. Therefore, a coolant temperature gauge is designed in the instrument system. The coolant temperature sensor detects the engine coolant temperature, allowing the driver to visually observe the coolant temperature under any operating condition and take appropriate action promptly.

4

Share

What is China VI Emission Standard?

VI refers to the China VI Emission Standard, which is the sixth-stage national standard for motor vehicle pollutant emissions. The formulation of the 'China VI' standard is based on the needs of China's national conditions, while incorporating both European and American standards. It no longer differentiates requirements between gasoline and diesel vehicles, meaning the 'China VI' standard surpasses 'Euro VI' to become one of the world's most stringent tailpipe emission standards. Below is relevant information about the 'China VI' standard: 1. Emission Limits: The 'China VI' standard is an upgrade from 'China V', imposing stricter controls on pollutant emissions. Specifically, it reduces carbon monoxide emissions from gasoline vehicles by 50%, total hydrocarbons and non-methane hydrocarbon emissions by 50%, and tightens nitrogen oxide emission limits by 42%. 2. Implementation Timeline: The 'China VI' standard is divided into two phases—6A and 6B. The first phase, starting July 1, 2020, prohibits the sale, registration, and licensing of vehicles below the 6A emission standard. The second phase, beginning July 1, 2023, extends this prohibition to vehicles below the 6B emission standard. However, these dates represent the national timeline, and some regions have already decided to implement the standard ahead of schedule.

3

Share

How to Check if the Car Air Conditioning Refrigerant is Sufficient?

Here are the methods to check if the car air conditioning refrigerant is sufficient: 1. Observation Method. This method involves observing the bubbles in the refrigerant through the sight glass to determine if the refrigerant is sufficient. The sight glass is usually located on the dryer's cap. After locating the sight glass, clean it and follow the steps below for inspection. (1) Start the engine, maintain its speed at around 2000r/min, and activate the air conditioning system. Then observe the refrigerant flow through the sight glass. If the refrigerant level in the air conditioning system is appropriate, you should see clear refrigerant flowing continuously without bubbles, except for occasional small bubbles at high temperatures. (2) Alternately turn the air conditioner on and off to confirm whether you are truly seeing clear refrigerant. Since the refrigerant is transparent and colorless, if it has all leaked out, it might be mistakenly assumed that the system is full of refrigerant. Turn off the air conditioning system and observe the sight glass. If there is refrigerant in the system, small bubbles should be visible when the system is off. If no small bubbles are seen during operation and the system is cooling the car, everything is normal. (3) If small bubbles are visible in the sight glass during operation, it indicates insufficient refrigerant. A professional should be consulted promptly for inspection and repair to identify the leak. (4) If a streak of oil or occasional chunks of oil are seen in the sight glass during operation, it indicates partial refrigerant leakage. The refrigeration system should be inspected and repaired by a professional immediately. 2. Temperature Method. This method involves checking the temperature at the dryer's inlet and outlet to determine if the refrigerant charge is appropriate. (1) First, locate the dryer in the air conditioning system. The dryer is usually positioned in front of the condenser, resembling a fire extinguisher (cylindrical), with two pipes connected to it—one leading to the expansion valve and the other to the condenser. (2) Run the engine at around 2000r/min and activate the air conditioning system. Hold both pipes with your hands to feel the temperature difference. (3) If the temperatures of both pipes feel similar, the refrigerant charge is appropriate. If the pipe leading to the condenser feels colder, it indicates insufficient refrigerant in the system. A professional should be consulted immediately to check for leaks in the refrigeration system.

3

Share

Can a car pass the annual inspection after replacing the headlights with LED ones?

Whether the modified LED headlights can pass the annual inspection depends on the specifications and performance of the modified headlights. If the color temperature, brightness, and beam angle of the modified headlights, which affect driving safety, meet the national requirements, they can pass the annual inspection. There are two main aspects to check: Whether the brightness meets the requirements, that is, the brightness should not be less than 1400 lumens. Whether the angle meets the standards, as long as the high and low beam angles are normal. In fact, as long as the modified LED headlights do not affect driving safety, they can pass the annual inspection smoothly. Relevant regulations on vehicle annual inspection: Vehicles that fail the annual inspection should be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office should confiscate their license plates and prohibit them from continuing to drive. Vehicles that do not participate in the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer ownership. Vehicles that meet the scrapping conditions or have been used beyond the specified years will not be inspected, and their license plates will be revoked, their files will be canceled, and they will be scrapped.

7

3

Share

What to Do If You Can't Locate the Source of Car Noise?

Is a Fire Extinguisher Mandatory in Vehicles?

What to Do When a Dry Dual-Clutch Transmission Experiences Jerking?

What is the principle of the coolant temperature sensor?

What is China VI Emission Standard?

How to Check if the Car Air Conditioning Refrigerant is Sufficient?

Can a car pass the annual inspection after replacing the headlights with LED ones?

What does the oil grade 0W20 mean?

How to Clean Cement from a Car Thoroughly?

What is the Difference Between Coating and Waxing?

Can a Car with Modified Body Kit Pass the Annual Inspection?