What to Do If You Can't Find a Spider in the Car?

How soon can I retake the driving test for Subject 3?

Starting from the day after failing the test, you can schedule a retake after ten calendar days. If you fail the Subject 3 test, you must wait at least ten days before reapplying for a retest: 1. According to Article 37 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Each subject can be tested once, and if you fail, you are entitled to one retake; 2. If you do not take the retest or fail the retest, the current test session will be terminated, and you must reapply for the test. However, Subject 2 and Subject 3 tests must be scheduled at least ten days apart; 3. Within the validity period of the driving skill test permit, the number of retakes for Subject 2 and Subject 3 road driving skill tests must not exceed five. If you fail the fifth retest, the results of other subjects you have passed will be invalidated.

19

1

Share

Does a 2015 vehicle require an annual inspection this year?

15-year-old vehicles do not require on-site inspection for annual review this year. Here is extended information about annual inspections: New regulations: According to the 2020 regulations, vehicles within ten years require biennial inspections. In the motor vehicle inspection reform implemented on November 20, 2020, the scope of motor vehicle exemption from inspection was expanded. In addition to the exemption of non-operating mini and small passenger vehicles with six seats or less within six years, non-operating mini and small passenger vehicles with 7 to 9 seats (excluding vans) within six years were also included in the exemption scope. On-site inspection: For non-operating mini and small passenger vehicles (excluding vans) over six years but less than ten years old, the inspection frequency was adjusted from once a year to once every two years, but the annual inspection still requires on-site inspection.

4

3

Share

Why does 12123 not show the option for license renewal upon expiration?

If 12123 does not display the option for license renewal upon expiration, it indicates that the conditions for renewal are not met, possibly due to incomplete materials or failure to submit a medical examination report. Below are specific details about driver's license renewal: Renewal Regulations: If a motor vehicle driver has not accumulated 12 penalty points in any scoring cycle during the six-year validity period of their license, they can renew it for a ten-year validity period. If they maintain this record during the ten-year validity period, they can renew for a long-term valid license. Content: A motor vehicle driver's license records the holder's ID number, name, gender, date of birth, permanent address, nationality, permitted vehicle type code, initial issuance date, validity period, and management records. It also includes the issuing authority's seal, file number, and the holder's photo. The design of the motor vehicle driver's license is stipulated by the Ministry of Public Security.

9

3

Share

How to reset the tire pressure on a Mercedes-Benz C200?

Mercedes-Benz C200 tire pressure reset method: First, turn on the ignition, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the dashboard warning light will turn off, completing the tire pressure reset. Abnormal tire pressure is generally caused by the following 3 reasons: Abnormal tire pressure: Generally, an alarm will sound if the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset in time, the tire pressure monitoring system will still record the previous data, causing the tire pressure monitoring indicator light to illuminate. In this case, simply perform a tire pressure reset. Damaged tire pressure sensor: The tire pressure sensor is used to monitor tire pressure and is directly installed inside the tire, connected to the tire inflation port. If the tire pressure sensor is damaged during driving, it will also cause the tire pressure warning light to illuminate. For sensor damage issues, only replacement with a new part is possible.

9

4

Share

What to Do If Your Car Gets Rear-Ended?

Methods for handling a rear-end collision: 1. Stop the vehicle immediately, protect the scene, and preserve evidence; 2. If there are no personal injuries, you can negotiate compensation on your own. If there are personal injuries, immediately provide first aid to the injured and call the police; 3. Keep the hazard warning lights on to prevent further accidents. More details are as follows: Article 14 of the "Road Traffic Accident Handling Procedures": In case of property damage accidents with any of the following circumstances: 1. The motor vehicle lacks an inspection qualification mark or insurance mark. 2. Collision with buildings, public facilities, or other structures. In such cases, if the vehicle can be moved, the involved parties should organize the evacuation of passengers to a safe location off the road. Under the principle of ensuring safety, evidence should be fixed by taking on-site photos or marking the position of the accident vehicles. After moving the vehicles to a location that does not obstruct traffic, call the police.

12

1

Share

What to Do When the Car Won't Start Due to No Power?

The solution to a car not starting due to no power is to perform a jump-start or replace the battery if it's dead. If the battery is undercharged or leaking, it should be replaced; otherwise, it may lead to the vehicle failing to start and a loss of power to onboard loads. Here are some relevant details about the battery: 1. When the ammeter indicates insufficient charge, recharge promptly. If you find the battery low while on the road and the engine won't start, as a temporary measure, you can seek help from another vehicle to jump-start your car by connecting the negative terminals and positive terminals of both batteries; 2. If the electrolyte level is low, replenish it with distilled water or a specialized replenishing fluid. Never use drinking water as a substitute, as it contains various trace elements that can adversely affect the battery; 3. Continuously cranking the engine can damage the battery due to excessive discharge. The correct method is to limit each starting attempt to no more than 5 seconds, with intervals of at least 15 seconds between attempts.

11

4

Share

What to Do If You Can't Find a Spider in the Car?

How soon can I retake the driving test for Subject 3?

Does a 2015 vehicle require an annual inspection this year?

Why does 12123 not show the option for license renewal upon expiration?

How to reset the tire pressure on a Mercedes-Benz C200?

What to Do If Your Car Gets Rear-Ended?

What to Do When the Car Won't Start Due to No Power?

Why Can't I Select the Vehicle Type When Scheduling an Annual Inspection on 12123?

What is the wading depth of the 14th-generation Sylphy?

What is the fuel tank capacity of the 2015 Hyundai Tucson in liters?

Does new antifreeze have an expiration date?