What to Do If You Can't Drive Your New Car Home?

2 Answers
Jon
07/29/25 2:36am
Choose an appropriate time to drive. Avoid rush hours; weekends are ideal as there are fewer vehicles on the road, making the experience less stressful. Ask an experienced driver to sit in the passenger seat and guide you. Seasoned drivers can offer timely advice and support. Drive at a slower speed, stay relaxed, and take your time. The key is not to panic. Consider renting a car for a few days beforehand to familiarize yourself with driving. This will make handling your new car much easier. If the route home is challenging, it might be safer to have someone else drive initially. Practice driving yourself when road conditions are better.
Was this review help?
13
0
Share
SanMaci
08/12/25 6:32am
I'm a newbie in the workplace who just bought my first car and was too scared to drive it when picking it up. My solution was to directly ask an experienced friend to help drive it home, and later treated them to a meal as thanks. Afterwards, I practiced every weekend on less crowded roads in the development zone, persisting for two weeks before daring to drive normally. My advice is not to force yourself to drive—nowadays, you can call a professional driver through ride-hailing apps in just half an hour, and some 4S stores even offer free car delivery services. If all else fails, calling a tow truck is also an option—it might cost a bit, but safety comes first. In the first few days after picking up the car, I even asked for guidance when parking during the day, afraid of scratching the new car, but gradually became more skilled.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

Is the Subaru XV's maintenance rate high?

Subaru XV has a high maintenance rate. Below is the relevant introduction of Subaru XV: Design concept: The basic design concept of Subaru XV is "Passion in the City", which is a new crossover model integrating sports and leisure, making it an ideal choice for urban people who pursue vitality and release passion. Therefore, this Subaru model achieves the best balance between fuel efficiency, driving pleasure, and fashionable, personalized exterior design. In terms of power: The Subaru XV gasoline engine provides a 2.0-liter horizontally opposed engine, with a maximum output power of 150 horsepower and a peak torque of 196Nm. The transmission is matched with a CVT continuously variable transmission.
10
3
Share

What is the fuel consumption of the Hongqi H5 1.5T?

The fuel consumption of the Hongqi H5 1.5T is 6.2L/100KM. The currently available Hongqi H5 1.5T models include the 2022 1.5T DCT Qiyue Edition and the 2022 facelift 1.5T DCT Qiyun Edition. Among vehicles in the same class, the K5 K5 2021 270T CVVD Fashion Edition has a combined fuel consumption of 5.6L/100KM; the Mistra 2021 1.8L CVT GLS Leading Edition has a combined fuel consumption of 5.3L/100KM; the Peugeot 508 2022 508L 360THP PureTech Pioneer Edition has a combined fuel consumption of 6.0L/100KM. Factors affecting a car's fuel consumption: Driving habits: Aggressive driving behaviors such as sudden acceleration, frequent overtaking, and not easing off the throttle before traffic lights can increase fuel consumption. The car itself: Cars with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier cars also tend to have higher fuel consumption due to the greater driving torque needed to move the extra weight.
6
4
Share

How to Find the Center Point of the Front of the Car Inside the Vehicle?

At the intersection point of the right front and right side of the car hood, align it at a 90-degree angle with the road surface and curb to locate the center point. Only after adjusting the seating position and seat correctly will the driver's line of sight and the relationship with the car hood be accurate. For shorter drivers who cannot see the hood while driving, the area below the front of the car becomes a blind spot, posing safety risks. In such cases, the seat can be raised to the highest position, or cushions or backrest supports can be used for assistance. The functions of the car hood are as follows: 1. Airflow Guidance: For objects moving at high speeds in the air, the air resistance and turbulence generated around the object directly affect its trajectory and speed. The shape of the hood can effectively adjust the direction of airflow relative to the car's movement and the resistance force, reducing the impact of airflow on the car. By guiding the airflow, air resistance can be decomposed into beneficial forces, increasing the tire's grip on the road and enhancing driving stability. The streamlined design of the hood is based on this principle. 2. Protection of the Engine and Surrounding Components: Beneath the hood lie critical components of the car, including the engine, electrical circuits, fuel lines, braking system, and transmission system. These are vital to the vehicle. By enhancing the strength and structure of the hood, it can effectively protect against impacts, corrosion, rain, and electrical interference, ensuring the vehicle operates normally. 3. Aesthetics: The exterior design of a vehicle is a direct reflection of its value. As a significant part of the overall appearance, the hood plays a crucial role in enhancing visual appeal and embodying the concept of the car. 4. Assisting Driver Vision: During driving, the driver's line of sight and the reflection of natural light are crucial for accurately judging road conditions ahead. The shape of the hood can effectively adjust the direction and form of reflected light, reducing its impact on the driver. 5. Preventing Accidents: The engine operates in a high-temperature, high-pressure, and flammable environment, posing risks of explosions, fires, or leaks due to overheating or component failure. The hood can effectively block damage caused by explosions, acting as a protective shield. It also helps isolate air and prevent the spread of flames, reducing the risk and damage of fires.
9
5
Share

What is the reason for the random jumping of the automatic door lock on the Baojun 310?

The reasons for the random jumping of the automatic door lock on the Baojun 310 are as follows: Door not properly closed: First, check if the door is properly closed. If not, it will automatically pop up. Door sensor interference: Also, check if there has been any collision that might have affected the door sensor, causing the computer to think the door is not properly closed. Circuit issue: If none of the above applies, you can visit a 4S shop for inspection, as there might be a minor circuit problem. Below is a related introduction to the Baojun 310: Exterior: The new Baojun 310 automatic transmission features innovative exterior design based on the original model, with added black surrounds on the front and sides, redesigned rear bumper and taillight shapes. The front adopts Baojun's latest family-style 'double U' design, with a three-horizontal-slat grille, sharp headlight shapes, and L-shaped daytime running lights. The side profile features a dual waistline design with a novel lower waistline shape, and the roof is equipped with a luggage rack. Interior: The cabin uses a dark color scheme, with upgraded seat shapes, materials, and functions. The seats feature a dual-tone design with black and orange sides, highlighting sporty elements. The dashboard adopts a bird-inspired fluid design, paired with hydro-transfer wood grain panels, high-gloss piano black finish, and hexagonal chrome-ringed self-illuminating instrument clusters. The interior also includes soft leather-wrapped door panels and a central armrest box.
13
4
Share

Where is the rearview mirror heating switch for Chery Tiggo 8?

The button for the rearview mirror heating in the Tiggo 8 is the same as the rear windshield heating button, which is the button next to the front windshield on the physical air conditioning controls with a small rearview mirror symbol. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rain or fog from the mirror, eliminating the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotating the knob will turn it on. The other is located on the air conditioning control panel—pressing the heating button will activate it. There is no need to manually adjust the angle, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After rotating the button, the electric heater behind the rearview mirror glass will quickly heat up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat will dissipate from the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporates, water droplets on the mirror surface will become smaller, and fog will gradually disappear, thereby heating the mirror and removing frost. If the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the rearview mirror. These wires consume a significant amount of power. When using the rearview mirror heating function, ensure the car is in an active state. Avoid activating the function while the car is stationary to prevent draining the car battery, which could leave insufficient power to start the vehicle. Other methods for defogging rearview mirrors include: Opening windows for airflow: Crack open the side windows slightly to allow air convection between the inside and outside of the car. This reduces the temperature difference, causing the fog to gradually disappear. Adjusting the car's air conditioning to the appropriate setting can also help defog by blowing warm air.
1
0
Share

Why Can't You Drive Straight in a Lane with Serrated Markings?

A lane formed by serrated markings is a variable lane, hence driving straight is not allowed. It is primarily set up at intersections to flexibly regulate traffic flow directions based on varying traffic volumes during different time periods, thereby alleviating traffic congestion. Relevant details are as follows: 1. The design rationale for variable lanes: This lane design mainly targets road sections with concentrated traffic during peak hours but insufficient lanes, or sections where there is a significant disparity in traffic flow between morning and evening rush hours. Roads with such lanes have dedicated indicator lights; driving is prohibited during non-operational hours. If mistakenly entered, a penalty of 3 demerit points and a fine ranging from 200 to 1,000 yuan will be imposed, which can be considered quite severe. 2. Driving rules for variable lanes: To use such a lane, observe the designated times displayed above—it will allow left turns or straight driving during specified time intervals. Additionally, in most cases, traffic police will be on duty directing traffic, sometimes manually guiding vehicles and other times using signal lights for instruction. Always follow the current signal light indications. Typically, if the display shows a straight lane, only straight driving is permitted; if it shows a left-turn lane, then left turns are allowed; if it shows a right-turn lane, then right turns are permitted.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.