What to Do If You Are Nearsighted When Taking the Driving Test?

2 Answers
VonAniyah
07/29/25 5:26am
Nearsighted individuals can wear glasses. During the physical examination, you only need to use glasses that suit you. The same applies during the test. Below is relevant information: 1. Height: To apply for large passenger vehicles, tractors, city buses, large trucks, or trolleybuses, the height must be at least 155 cm. For medium-sized passenger vehicles, the height must be at least 150 cm. 2. Vision: For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, the naked or corrected vision of both eyes must reach at least 5.0 on the logarithmic visual acuity chart. For other vehicle types, the naked or corrected vision of both eyes must reach at least 4.9 on the logarithmic visual acuity chart. 3. Color Vision: No red-green color blindness. 4. Hearing: Both ears must be able to distinguish the direction of sound at 50 cm from a tuning fork. Those with hearing impairments who can meet the above conditions with hearing aids can apply for a driver's license for small cars or small automatic transmission vehicles. 5. Upper Limbs: Both thumbs must be intact, and each hand must have at least three other fingers intact with normal movement. However, those with missing fingertip segments or a missing right thumb can apply for a license for small cars, small automatic transmission vehicles, low-speed trucks, or three-wheeled vehicles. 6. Lower Limbs: Both lower limbs must be intact with normal movement, and the length difference must not exceed 5 cm. Those missing a left lower limb or with impaired movement can apply for a license for small automatic transmission vehicles. Those missing a right lower limb or both lower limbs but can sit independently can apply for a license for small automatic transmission vehicles designed for disabled individuals.
Was this review help?
15
3
Share
MacLila
08/12/25 9:01am
When I was getting my driver's license, I was also nearsighted, and it was totally fine! Just remember to wear your usual glasses during the physical exam, as the staff will test your corrected vision. I specifically got a new pair of glasses back then because my old prescription wasn't strong enough. During driving practice, the instructor kept reminding me to keep the lenses clean—it would be troublesome if visibility was poor on rainy days. After getting the license, you need to be even more careful when driving. If the UV rays are strong during the day, you can get prescription sunglasses. At night, avoid blue-light-blocking glasses as they reduce contrast. It's advisable to get your latest vision checked at an optician before the test. For those with high myopia, choose lightweight frames for more comfort during long drives.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

How often should the transmission fluid be changed for the 10th-generation Civic?

Normally, transmission fluid should be changed every three years or 60,000 kilometers. This maintenance task requires regular attention. The risks of not changing transmission fluid include: 1. Prolonged exposure to high-speed and high-temperature conditions can cause the fluid to deteriorate and evaporate, accelerating wear on mechanical components and potentially damaging internal transmission parts. 2. Extended intervals without fluid changes may lead to weak acceleration when starting a cold engine. 3. Vehicles may experience minor slipping during operation. 4. Over time, unmaintained transmission fluid thickens, potentially clogging the transmission cooler and causing excessive fluid temperatures that accelerate wear.
16
2
Share

How to adjust the fuel supply of a four-cylinder diesel oil pump?

To adjust the fuel supply of a four-cylinder diesel oil pump, follow these steps: 1. Remove the fuel injection pump: Disconnect the high-pressure fuel pipe of the cylinder. Have someone slowly rotate the crankshaft. As it approaches the fuel supply advance angle position of cylinder 1, rotate the crankshaft slowly while watching the oil surface at the outlet of cylinder 1's delivery valve. Stop rotating the crankshaft the moment the oil surface just moves upward. 2. Additional information: First, remove the high-pressure fuel pipes of all four cylinders of the fuel injection pump. Then, remove the venting bolt on the fuel injection pump and install a specially processed adapter as needed. Attach a dial indicator and tighten it. Rotate the crankshaft. This allows for adjustment of the fuel supply.
7
5
Share

What is the problem when the gear indicator light flashes?

Dashboard gear indicator light flashing is usually caused by transmission overheating protection leading to transmission failure. Below is relevant information about gear indicator light malfunction: Reasons for gear indicator light malfunction: Generally, when a vehicle's gear indicator light flashes, it is mostly due to transmission overheating protection causing transmission failure. To reset the TCU (Transmission Control Unit), follow these steps: Insert the key into the ignition slot. Turn it one position to the right to the power-on but not started state. Fully depress the accelerator pedal and hold for about 5 seconds. Turn the key one position to the left to the off position without removing it. Release the accelerator pedal. After about 2 minutes, you will hear a slight "click" sound. The TCU reset is now complete. Solutions for gear indicator light flashing: Open the engine compartment and check if the wiring is aged or damaged by rodents. Try engaging all gears to see if they can be shifted normally. If they can, it might be due to improperly installed gear selector switch. Issues with the wiring from the gear selector switch to the computer, such as looseness or corrosion, can also cause the problem. Problems with the transmission or battery can also lead to the D gear indicator light flashing.
17
5
Share

What should I do if the engine warning light of Wuling Rongguang is on?

If the engine warning light is on, you can follow these steps: First, check whether the engine is running normally and whether there are problems such as shaking or black smoke. If so, try not to start the engine again. It is particularly important to note that you must not start the engine if the red light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once, or without pressing the clutch, turn the car key halfway to the 'on' position. After the car is powered on, the self-check function will be activated. Wait for 5-10 seconds and observe whether the warning light on the dashboard goes off. If the warning light does not go off, please go to a service station as soon as possible to find out the cause. The service station can use a portable diagnostic device to read the fault code, obtain fault information, and carry out targeted repairs. There are mainly 7 reasons why the engine warning light is on: Sensor failure: The sensors mentioned here include water temperature, crankshaft position, air flow, intake temperature, oxygen sensor, etc. When these sensors are damaged, have poor contact, or the signal is interrupted, the car's ECU cannot accurately obtain engine data, which will cause the engine warning light to come on. Fuel quality issues: If fuel and engine oil are not added as required by the manufacturer, it may cause engine wear and lead to the warning light coming on. Poor combustion of the mixture: Poor combustion of the mixture can cause engine carbon deposits or knocking. After being detected by the oxygen sensor and reported to the ECU, the warning light will come on as a warning. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to come on. The most common is turbocharger damage, accompanied by symptoms such as oil leakage, high oil consumption, reduced power, metal noise, and blue or black smoke from the exhaust pipe. Intake issues: If there is a problem with the car's intake, it may cause engine pipeline blockage, and in severe cases, the engine warning light will come on. If the air filter is not clean and not regularly cleaned, it can lead to intake problems. Exhaust issues: Exhaust faults can also cause the engine warning light to come on. The rear oxygen sensor, three-way catalytic converter, exhaust camshaft, and bearing faults are all causes of exhaust problems, with the three-way catalytic converter being the most common. Using leaded gasoline, lead or silicon-containing lubricant additives, impact damage to the three-way catalytic converter, and engine fuel supply system faults can easily cause three-way catalytic converter failure. Anti-theft system failure: If the car's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can also cause the engine to malfunction and the warning light to come on.
16
3
Share

Can a 5-seater SUV accommodate 6 people?

No, it cannot accommodate six people. According to regulations, a five-seater vehicle can carry a maximum of five people, including the driver. Exceeding this number (including the driver) constitutes an illegal act of overloading. Under the provisions of the "Road Traffic Safety Law," violators may face a fine ranging from 200 to 500 yuan and a deduction of 6 points. Below is more relevant information: Relevant laws and regulations: Article 92 of the "Road Traffic Safety Law" states that passenger vehicles exceeding the rated number of passengers shall be fined between 200 and 500 yuan; those exceeding the rated number by 20% or carrying cargo in violation of regulations shall be fined between 500 and 2,000 yuan. For freight motor vehicles exceeding the approved load capacity, a fine of 200 to 500 yuan shall be imposed; those exceeding the approved load capacity by 30% or carrying passengers in violation of regulations shall be fined between 500 and 2,000 yuan. For the aforementioned violations, the traffic management department of the public security authority shall detain the motor vehicle until the illegal status is rectified.
2
5
Share

Where are Mitsubishi cars produced?

Mitsubishi cars are manufactured in Japan. Mitsubishi Motors Corporation is a member of the Mitsubishi Group in Japan. Here is some information about Mitsubishi: 1. GAC Mitsubishi Motors Co., Ltd. is a Sino-foreign joint venture jointly operated by Guangzhou Automobile Group Co., Ltd., Mitsubishi Motors Corporation, and Mitsubishi Corporation, with a cooperation period of 30 years. 2. GAC Mitsubishi has fully inherited the high-quality resources of the entire industrial chain from the former GAC Changfeng production plant (Xingsha Plant), including sales channels and procurement systems. It has also comprehensively upgraded and transformed the original production lines and introduced an advanced production quality system. As a result, GAC Mitsubishi entered a mature operational stage immediately upon its establishment.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.