What to Do If You Always Run Over the Lines in Subject 2?

3 Answers
LaKennedy
07/29/25 1:14pm
Here are the solutions for always running over the lines in Subject 2: 1. Adjust properly before getting in the car to achieve the most comfortable driving state. Place your feet naturally on the brake and clutch, neither too close nor too far. The distance between your head and the car roof should be about two fists. The main principle is that when the driver looks straight ahead, their line of sight should fall on the centerline of the windshield to maintain the best view. 2. Control the speed with the clutch by pressing lightly and releasing slowly. In Subject 2, the most crucial skill is learning to control the clutch properly—avoid speeding up or slowing down abruptly, and maintain a steady speed. Manual transmission cars generally have clutches with different characteristics, such as high or low engagement points and light or heavy pedal feel. Some learners report that pressing the clutch stops the car, while releasing it makes the car move too fast. The key is to release the clutch slowly—once the car starts moving, stop releasing further, as this is the optimal engagement point. If the car feels too slow, gently release the clutch; if it feels too fast, lightly press it. 3. Adjust according to your own situation. While the methods taught by instructors are mostly the same, each driver has a different rhythm. Find the rhythm that suits you best through repeated practice and identify the optimal timing.
Was this review help?
19
0
Share
VanEva
08/14/25 3:12am
When practicing reverse parking and hill starts, always pay attention to avoid crossing the lines. I recommend starting with basic steering wheel control adjustments. Make sure to focus on the reference points at the front of the car, not just the rearview mirrors—scan the surroundings comprehensively to prevent turning too early or too late, which causes the wheels to cross the line. Speed control is key; don’t go too fast—slowing down gives you more time to adjust. Spend half an hour daily repeating the maneuvers, such as placing cones in an open area to simulate boundary lines, to reinforce muscle memory. Before the test, take deep breaths to relax—nervousness can lead to mistakes. If you’re still struggling, ask a friend to guide you from the passenger seat or record a video to review your errors, which speeds up improvement. After a few days of persistence, you’ll notice more precise steering, and the line-crossing issue will naturally decrease, helping you pass the second driving test smoothly.
Was this review help?
17
1
Share
Expand All
MacKira
10/09/25 8:34am
I often ran over the lines during my Subject 2 test, mainly due to nervousness causing poor coordination between hands and feet, leading to mistakes. Try telling yourself it's just practice—don't put too much pressure on yourself. During the test, imagine driving as relaxed as usual. Before getting in the car, check if the seat position and rearview mirror angle are comfortable so your body can relax and focus on operating. Chat with friends to relieve stress or listen to light music to stabilize your mood. Learn from small mistakes during practice—don’t get discouraged after each line-crossing; analyze the reasons, like unstable speed or shifted gaze, and gradually develop good habits. Eat something before the test to replenish energy and stay alert. Pay attention to these details in daily driving, and you’ll pass Subject 2 in one go without deductions.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

How often should the spark plugs be replaced in a Golf 7?

The spark plugs in a Golf 7 should be replaced every 40,000 to 50,000 kilometers. During maintenance, you can check the combustion condition of the spark plugs. If the combustion condition is good, replacement may not be necessary. The Golf 7 refers to the seventh generation of the Golf model. The vehicle has a length of 4255 mm, a width of 1799 mm, a height of 1452 mm, and a wheelbase of 2637 mm. In terms of power, the Golf 7 is equipped with the EA211 series 1.6L and 1.4T engines. The 1.6L engine has a maximum power output of 81 kW and a maximum torque of 155 Nm. It is paired with either a 5-speed manual or a 6-speed automatic transmission.
9
3
Share

What are the body dimensions (length, width, height) of the Trumpchi GM6?

The body dimensions (length, width, height) of the Trumpchi GM6 are 4780mm, 1860mm, and 1730mm respectively, with a wheelbase of 2810mm. The Trumpchi GM6 is an MPV model under GAC Group, featuring front-engine, front-wheel-drive layout. It adopts MacPherson strut independent suspension at the front and torsion beam non-independent suspension at the rear. In terms of power, the Trumpchi GM6 is equipped with a turbocharged engine delivering maximum horsepower of 169hp, maximum torque of 265N·m, and maximum power of 124kW. The engine reaches its maximum power at 5000rpm and achieves peak torque between 1700-4000rpm.
16
4
Share

How to Check the Battery Level of a Mercedes-Benz?

Mercedes-Benz battery level checking method: 1. For cars with one-button start, press the one-button start button once; 2. Then, hold down the phone button on the right side of the steering wheel with your right hand, and simultaneously press the OK button on the left side of the steering wheel with your left hand for 5 seconds, observing the changes on the dashboard; 3. Select the vehicle menu, and after entering, scroll up and down to see the current battery level. Mercedes-Benz is a German luxury car brand. Taking the Mercedes-Benz GLK as an example, it is a mid-size SUV under the Mercedes-Benz brand, with dimensions of 4556 mm in length, 1840 mm in width, and 1689 mm in height, and a wheelbase of 2755 mm. In terms of suspension, the front suspension of the Mercedes-Benz GLK is a MacPherson strut with a three-link suspension, and the rear suspension is a multi-link independent suspension.
1
5
Share

How to Solve Car Carbon Deposits?

Car carbon deposit treatment methods are: 1. Add fuel additives when refueling; 2. Disassemble and clean the engine; 3. Use an intravenous drip cleaning method for the car. Carbon deposits refer to: the residue left in the fuel injector, throttle, fuel line, pipeline, or spark plug due to incomplete combustion of fuel in the engine or the inability to completely burn the paraffin and colloid in the fuel. The causes of car carbon deposits are: 1. Long-term poor driving habits of the owner; 2. Mismatch between fuel grade and compression ratio; 3. Aging or damage of the engine carburetor; 4. Long-term high-load driving; 5. Not replacing the air filter; 6. Inaccurate ignition timing or fuel supply time; 7. Low engine temperature; 8. Poor sealing of valves and valve seats; 9. Prolonged engine idling.
2
5
Share

How to Solve High Fuel Consumption in Magotan?

First, check the oxygen content in the exhaust gas from the tailpipe. If no abnormalities are found, the oxygen sensor malfunction can likely be ruled out. Also, pay attention to the condition of the spark plugs. If the spark plugs have been used for too long, it can prevent the gas from mixing properly and lead to carbon buildup. When encountering such issues, promptly lift the vehicle and thoroughly clean the undercarriage. In addition to these common problems, improper tire pressure (either too high or too low) can also increase fuel consumption. Manufacturers usually provide the optimal tire pressure value.
1
2
Share

How to Reset the Oil Life on a Cadillac ATS-L?

Turn on the ignition, press the multifunction button next to the OK prompt in the upper right corner of the display. Press the PWR/VOL button once to activate the system. Press the INFO button on the left side of the display. Press the multifunction button next to the RESET prompt in the upper right corner of the display.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.