What to Do If You Accidentally Fill Up with 92 Octane Gasoline Instead of 95 Octane?

1 Answers
MiguelDella
07/30/25 1:07am
Accidentally filling up with 92 octane gasoline instead of 95 octane has no significant impact. Occasionally mixing different octane levels once or twice is not a problem, but prolonged use of the wrong octane gasoline can cause issues. The appropriate gasoline octane level for a car is determined by the engine's compression ratio, which is detailed in the vehicle's user manual. Gasoline octane ratings refer to the octane number, indicating the fuel's anti-knock properties. Higher octane gasoline has better anti-knock performance. For example, 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. The higher the isooctane content, the better the anti-knock performance.
Was this review help?
14
3
Share
More Forum Discussions

What is the Zhima car?

Zhima car is a microcar under the Zotye brand. The exterior of the Zotye Zhima remains largely consistent with the Zhima E30, featuring a compact two-seat design. The front grille of the new car incorporates Zotye's new "Domy" logo, and the fog light areas on both sides are adorned with blue decorative strips. The side of the body also features an exclusive EV blue badge, indicating its identity as a new energy vehicle. Below is an introduction to the Zotye Zhima: 1. Interior: The new car adopts a two-seat design, with the interior extensively decorated with blue elements. The dashboard is equipped with a large-sized display screen, which includes functions such as Bluetooth, rearview camera, and GPS navigation. 2. Powertrain: The new car utilizes a pure electric system, powered by an electric motor with a maximum output of 29 kW, and has a top speed of 100 km/h.
19
1
Share

What is the real fuel consumption of the 2011 Teana 2.0?

The real fuel consumption of the 2011 Teana 2.0 is 8.3 liters per 100 kilometers. The fuel consumption per 100 kilometers refers to the fuel consumption of a vehicle traveling at a certain speed on the road for 100 kilometers, which is a theoretical indicator of the vehicle. The fuel consumption per 100 kilometers is a value measured by the manufacturer in an objective environment using a dynamometer installed on the vehicle chassis, converted into speed parameters, and then calculated by specifying the speed to obtain the theoretical experimental fuel consumption data per 100 kilometers for the model. The 2011 Teana 2.0 is a mid-size sedan under the Nissan brand. The corners of the headlights are exceptionally sharp, and the arc of the integrated body bumper rises from both sides to the outer edge of the headlights, then naturally extends from the outermost edge of the headlights to form a smooth waistline running from the front to the rear, complemented by a rounded arc roof, making it natural, smooth, dynamic, and stylish.
8
1
Share

Can a 48V motor be used with a 72V battery?

It cannot be used with a 72V battery because the voltage is too high and will burn out the motor. Here is an introduction about motors: "1. Introduction: A motor (English: Electric-machinery, commonly known as 'motor') refers to an electromagnetic device that realizes the conversion or transmission of electrical energy according to the law of electromagnetic induction. In a circuit, the motor is represented by the letter M (old standard uses D), and its main function is to generate driving torque as a power source for electrical appliances or various machinery. A generator is represented by the letter G in a circuit, and its main function is to convert mechanical energy into electrical energy. 2. Protector: The function of a motor protector is to provide comprehensive protection for the motor. It is a device that gives an alarm or protection when the motor experiences overload, phase loss, locked rotor, short circuit, overvoltage, undervoltage, leakage, three-phase imbalance, overheating, bearing wear, or stator-rotor eccentricity."
20
1
Share

What is the diameter of an 825r20 tire in centimeters?

20 inches. Below is an introduction about tires: 1. Introduction: A tire is a circular elastic rubber product assembled on various vehicles or machinery to roll on the ground. It is usually mounted on a metal rim, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Performance: Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation.
17
0
Share

What is the wading depth of the xrv?

xrv has a wading depth of 25cm. When wading, pay attention to the following: 1. It is best to turn off the air conditioning: Turning on the air conditioning will cause the electronic fan at the front of the vehicle to run continuously. During wading, the rotating fan blades may stir up water, potentially causing water to enter the engine. Therefore, it is advisable to turn off the air conditioning while wading and wait for the electronic fan to stop before entering the wading section, which is better for the vehicle. 2. Accelerate appropriately when encountering oncoming traffic while wading: If there is oncoming traffic while wading, be sure to observe the height of the water waves in front of the other vehicle. If the waves are too high, you should accelerate appropriately.
5
4
Share

Are the car doors replaced at 4S stores original factory parts?

The car doors replaced at 4S stores are original factory parts, as many 4S stores do not allow the use of sub-factory components for vehicle repairs. It is not recommended to use sub-factory parts when replacing doors, as sub-factory parts differ from the original stamping molds in terms of precision and are relatively cheaper. The processing precision and manufacturing materials of original factory doors are the same as those of the original parts, and their quality meets automotive manufacturing standards. The only difference lies in the painting process: original factory doors are painted along with the entire vehicle, while replacement original factory doors are unpainted and are painted separately later. As long as the installation process is professional, there will be no significant difference in quality and completeness between original factory and original parts. Note that since car doors are not considered wear-and-tear parts, any replacement is a strong reason to suspect that the vehicle has been involved in a collision accident, which could classify the car as an accident vehicle and lead to depreciation. Therefore, it is advisable to avoid replacing the door if it is damaged in an accident, unless absolutely necessary. If safe and reliable, dent repair should be prioritized over replacement.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.