What to Do If Vehicle License or Driver's License Is Lost?

1 Answers
VanTyler
07/29/25 7:59pm
If the motor vehicle license is lost, the owner of the motor vehicle should apply for a replacement at the vehicle management office of the registration location. The required materials for the application are as follows: 1. Application form: 'Motor Vehicle License Plate and Certificate Application Form'. 2. ID: Original and photocopy of the owner's identity proof. 3. Lost part: For replacement or reissuance of license plates or vehicle licenses, the undamaged, lost, or damaged parts must be returned. 4. Proxy proof: If an agent handles the application, a power of attorney and the agent's identity proof must also be submitted. 5. Other proofs: Other proofs and certificates required by laws and administrative regulations when applying for replacement registration certificates, replacement or reissuance of license plates, or vehicle licenses.
Was this review help?
14
3
Share
More Forum Discussions

What brand is FARROAD tires?

FARROAD is a tire brand under Shandong Fengyuan Tire Manufacturing Co., Ltd., primarily focusing on OEM exports. The main features of FARROAD tires are quietness and comfort. However, it offers multiple series, including the handling and sports series, wear-resistant series, and comfort series. FARROAD tires are exported to over 100 countries and regions in Europe and the Americas, with comprehensive domestic sales coverage. They are suppliers for over ten automobile and new energy vehicle manufacturers, including Brilliance, Zotye, and BAIC. Additionally, the FARROAD brand has been recognized by Shandong Province as a key international self-owned brand, a dual-excellent brand in quality and reputation in the Chinese market, and a national industry leader in quality. On August 12, 2019, Shandong Fengyuan Tire Manufacturing Co., Ltd. was awarded the "National Quality Award Encouragement Prize" by the China Association for Quality. Tires are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance, along with high wear resistance and flex resistance, as well as low rolling resistance and heat generation. They directly contact the road surface and work with the vehicle's suspension to mitigate impacts during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road, improving the vehicle's traction, braking, and off-road capability while bearing the vehicle's weight. FARROAD tire maintenance methods: Increase awareness of tire safety and inspect tires regularly. Regularly correct wheel balance, as unbalanced wheels can cause high-frequency oscillations during high-speed driving, leading to uneven tire wear. Perform tire rotation periodically. To maintain even tire wear on the same vehicle, rotate the tires every 5,000 kilometers. In daily use of FARROAD tires, pay attention to the following points: Regularly check the tire surface for cracks, deformations, or other defects. Due to wear during driving, the tread grooves gradually become shallow. If the tread is worn flat, it loses its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks can also pose a risk of tire blowouts during high-speed driving. Additionally, promptly remove pebbles from the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that can deteriorate rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not splash water to cool tires. In hot weather or during high-speed driving, tires can overheat, increasing air pressure. In such cases, stop to allow the tires to cool naturally. Avoid deflating or splashing water to cool them, as this can cause abnormal aging of the tread rubber. Avoid sudden braking. Minimize frequent or hard braking to prevent accelerated tread wear from dragging against the road surface.
1
4
Share

What Causes the Engine Warning Light to Illuminate in the 10th Generation Accord?

The engine warning light in the Accord may illuminate due to the following seven main reasons: Sensor Malfunction: This includes sensors such as coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors. When these sensors are damaged, have poor connections, or experience signal interruptions, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or Oil Quality Issues: Failure to use the fuel or engine oil as specified by the manufacturer may cause engine wear, leading to the warning light activation. Poor Combustion of Air-Fuel Mixture: Incomplete combustion can result in engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate. Causes include faulty spark plugs, ignition coils, fuel pump issues, or clogged fuel lines. Turbocharger Problems: Issues with the intake boost system or turbocharger can also trigger the engine warning light. Common symptoms include oil leaks, excessive oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake System Issues: Clogged engine intake pathways, often due to a dirty air filter that hasn't been cleaned regularly, can lead to the warning light activation. Exhaust System Problems: Faults in the exhaust system, such as a malfunctioning rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, may cause the warning light to illuminate. The catalytic converter is the most common culprit, often damaged by leaded gasoline, improper lubricant additives, physical impact, or fuel system issues. Anti-Theft System Malfunction: If the vehicle's electronic anti-theft system fails or the anti-theft controller doesn't match the engine ECU, the engine may not operate properly, and the warning light may turn on. Steps to Address the Engine Warning Light: First, check if the engine is running normally. If there are issues like shaking or black smoke, avoid restarting the engine—especially if the light is red. If the engine starts, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the "ON" position (without engaging the clutch). The vehicle will perform a self-check. After 5-10 seconds, observe if the warning light turns off. If the light remains on, visit a service center promptly. Technicians can use a diagnostic tool to retrieve trouble codes and perform targeted repairs.
1
0
Share

What brand is the Explorer's transmission?

Explorer's transmission is a 10AT transmission. Small gear ratio changes: The gear ratio changes between gears of the 10AT transmission are relatively small, resulting in smooth and seamless shifting. The 10AT transmission can support up to five consecutive downshifts at once, instantly bringing the engine to high RPMs, delivering more direct power. Multiple coaxial design: The torque converter is only 26 cm wide, and this 10AT transmission also features a multiple coaxial design for the clutches, allowing it to achieve 10 forward gears with just six sets of clutches and four sets of planetary gears. It can withstand a maximum torque of 800 Nm, showcasing excellent performance.
19
0
Share

What sound system does the Citroen C5 X use?

Citroen C5 X uses Focal sound system. Head unit: Professionally referred to as the sound source, mainly consisting of radio frequency modulation devices and recording playback equipment (radio, cassette player, CD player, etc.). Power amplifier: Its feature is compact size. The installation space designed for audio systems on car consoles is relatively small, with DM standard dimensions of (length) 183mm x (height) 50mm x (depth) 153mm. Within this limited installation space, car audio systems generally can only use high-density surface-mounted components, adopting a multi-layer three-dimensional assembly structure. In comparison, home audio systems are not subject to this size limitation.
11
1
Share

What is the default PIN code for Mercedes-Benz?

Mercedes-Benz's default PIN code is 1234 or 0000. The car's PIN code primarily serves as an anti-theft measure. PIN code: When situations like a damaged immobilizer occur, 4S dealerships can perform repairs based on the vehicle's PIN code. The PIN code acts as the vehicle's identification number, ensuring its security. Mercedes-Benz model series: Mercedes-Benz is a German automotive brand renowned for luxury and high performance, headquartered in Stuttgart, Germany. As part of Daimler AG, its product range includes various passenger vehicles and medium/large commercial vehicles. Model series include: A-Class, B-Class, C-Class, CLS-Class, SLC-Class, etc.
8
1
Share

What is the Chery Ant PTC?

Chery Ant PTC is a DC PTC heater used in electric vehicles, which is a type of ceramic heater. PTC: PTC stands for Positive-Temperature-Coefficient, referring to semiconductor materials or components with a large positive temperature coefficient. Automotive heaters first appeared in Europe in the 1940s, primarily used for preheating engines in winter and providing warmth for truck or bus cabins. Function of PTC: The PTC thermistor element features automatic temperature-controlled heating, operating in a contactless state during temperature regulation. It is typically fixed directly to the inner wall of the vaporization chamber to heat the gasoline inside, rapidly increasing the temperature. This enhances the vaporization effect of fuel combustion, not only aiding vehicle startup in low temperatures but also reducing pollution from vehicle exhaust and lowering fuel consumption.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.