What to do if the windshield is hit by a small stone mark?

1 Answers
FinnAnn
07/29/25 8:01pm
The windshield can be repaired if it is hit by a small stone mark. Some cracks and pits in the windshield can be repaired, while others cannot. If the crack is too long or the pit mark is too large, it cannot be repaired, as the repair effect is limited. However, for a small stone mark on the car windshield, it is completely repairable. Related information: 1. The principle of windshield repair: Use repair tools to inject repair fluid into the crack or pit. After the repair fluid fills and solidifies, it can cover the damage, prevent cracking, and achieve the repair effect. It should be noted that if the glass has cracks or pits, they need to be dealt with as soon as possible. Repairable ones should be repaired promptly, and those requiring replacement should be replaced in time. 2. Timely windshield repair: During driving, the windshield needs to withstand wind resistance and continuous vibration. Over time, small cracks may gradually extend and grow, increasing in size. At this point, glass that could have been repaired may only be replaceable. Therefore, windshield repair should be done promptly, as replacing the glass is costly, and unnecessary expenses should be avoided.
Was this review help?
1
0
Share
More Forum Discussions

Is Adding a Front Splitter Considered Illegal Modification?

No, it is not considered illegal modification as long as you file the changes with the vehicle management office. Installing a front splitter and side skirts falls under the category of exterior modifications. Here is some additional information: 1. Reasons for modification: Many car enthusiasts like to install front splitters and side skirts on their vehicles. These additions can make the car's chassis appear lower and enhance its overall appearance. Some front splitters can also provide aerodynamic benefits, as can certain side skirts. 2. Preventing damage: When installing front splitters and side skirts, it's essential to have them professionally installed to ensure they are securely attached. If you have these modifications, you need to be cautious when driving on rough, unpaved roads. Some car owners opt for carbon fiber front splitters, which can be costly to replace if damaged. Front splitters are highly susceptible to damage during everyday use, so careful consideration is advised before installation.
13
4
Share

Does the Infiniti ESQ have independent suspension?

Infiniti ESQ only features independent suspension on both front and rear axles in its four-wheel-drive version. The front-wheel-drive version only has an independent front suspension, while the rear suspension does not use an independent setup. The four-wheel-drive model employs a MacPherson strut independent front suspension and a multi-link independent rear suspension. The front-wheel-drive version uses a MacPherson strut independent front suspension and a torsion beam rear suspension. In terms of exterior design, the Infiniti ESQ largely retains the styling of the Juke Nismo, giving the vehicle a very distinctive appearance. The ESQ only introduces minor refinements in details, with the most noticeable difference being the 'ESQ' badge embedded in the front grille, clearly indicating the vehicle's identity.
16
3
Share

Is the Dongfeng Honda Jade going to be discontinued?

It has already been discontinued. Below are the specific reasons for the discontinuation of the Honda Jade: 1. Powertrain: The discontinuation of the Jade is related to its low sales performance over the six years since its launch. In terms of powertrain, the current Jade is equipped with a 1.8L/1.5T engine paired with a 5MT/CVT transmission, delivering maximum power of 141Ps and 156Ps respectively. This performance is not outstanding, and there were later issues with oil dilution. 2. Features: The Jade's features also failed to keep up with current automotive market trends. It lacked functions such as parking sensors, rearview cameras, and cruise control, which are commonly found in competing models. Additionally, the new Jade only offered a five-seat version, making it less competitive in terms of both features and powertrain compared to other joint-venture and domestic models in the same price range.
15
0
Share

How to Upgrade Car Navigation System?

It is best to go to a 4S store for after-sales service or to an auto repair shop to upgrade your car navigation system. Here is some relevant information about car navigation systems: 1. Common in-car navigation maps: In China, the most widely used map versions include Kailide, Daodao Tong, CJT, and AutoNavi. Relevant information will be promptly released on the official websites of major map companies. 2. Correct operation methods for in-car navigation: (1) When using it, you should close the page first and then turn off the device. It is not allowed to turn off the device directly without closing the page, as this is an improper operation. (2) Before the first three uses, charge the device for about 10 hours to maximize the battery's storage capacity. (3) Start the car first, then plug in the cigarette lighter power. After navigation is completed, unplug the cigarette lighter and plug it back in after the next car start, which helps protect the device's battery.
13
3
Share

How to Adjust the Headlight Height of the Cruze?

Here is a detailed introduction to the headlight height adjustment methods for the Cruze: 1. Manual Adjustment: Utilize a sliding rheostat to adjust the motor for height. The driver can adjust the angle of the light beam via the light knob under the car dashboard based on the driving route conditions. 2. Automatic Adjustment: Input signals from the height position sensor are converted into voltage signals through an algorithm, and the headlight control module drives the motor to adjust the headlights. The car is equipped with corresponding sensors that can automatically detect the dynamic balance status of the vehicle during driving. 3. Headlight Assembly Fine-tuning: A few models do not have a headlight height adjustment function, hence no headlight height adjustment button. In such cases, fine-tuning of the headlight height can be done by adjusting the fine-tuning knob on the headlight assembly.
9
4
Share

How many cylinders does the Infiniti Q50L engine have?

The Infiniti Q50L engine has four cylinders. This model is equipped with a 2.0-liter four-cylinder turbocharged engine across the entire lineup. The Infiniti Q50L's engine delivers 211 horsepower and a maximum torque of 350 Nm. This engine can output its maximum power at 5,500 rpm and reach its peak torque between 1,500 to 3,500 rpm. The Infiniti Q50L features a body extended by 50mm, with its elongated design enhancing the overall harmonious appearance. The side profile is characterized by a crescent-shaped C-pillar as the visual focal point, around which soft lines are organized and extended. In the wave-like dual waistline design, one waistline runs almost straight from the front to the rear door, while the other extends forward from the rear and rises sharply at the top of the rear wheel arch, showcasing a sharp, blade-like sense of power.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.