What to Do If the Windshield Has Pockmarks from Pebbles?

What to Do If the Tire Valve Cap Falls Off?

Losing the valve cap does not pose a safety risk to the vehicle. However, it is advisable to purchase a replacement online or have it installed at a repair shop. Over time, the valve can be affected by dust and debris, potentially leading to air leakage or slow inflation. More details are as follows: 1. Wear Indicators Determine Tire Replacement: Regardless of the brand, all tires have wear indicators at the bottom of the tread grooves. Typically, the height of the wear indicator on car tires is 1.6 mm, which matches the legal minimum tread depth. For load-bearing tires, the wear indicator height is 2.4 mm. When the wear indicator height is less than 1.6 mm, it indicates that the tire needs to be replaced. 2. Tire Condition Determines Replacement: Additionally, the replacement cycle of tires also depends on their condition. Some tires may appear undamaged but have been patched multiple times or have too many injuries. In such cases, it is best to replace the tire as soon as possible to avoid potential hazards.

18

2

Share

How Many Kilometers Should Truck Brake Pads Be Replaced?

Truck brake pads are generally replaced every 10,000 kilometers or so. However, brake pads should also be replaced under the following circumstances: 1. Check the thickness: Normally, a brand-new set of brake pads is about 1.5cm thick. When the visible thickness of the brake pad is less than 0.5cm, it needs to be replaced. Each brake pad also has a raised indicator on both sides, which is about 2-3mm thick. This is the minimum replacement limit for the brake disc. If the brake pad thickness is already level with this indicator, it must be replaced immediately. 2. Listen for sounds: If you hear a metallic scraping or squealing sound when lightly applying the brakes, the brake pads must be replaced immediately. This indicates that the wear indicators on both sides of the brake pads are directly rubbing against the brake disc, meaning the brake pads have exceeded their limit. 3. Feel the braking force: If you need to press the brake pedal deeper than usual to achieve the same braking effect, or if you notice a significantly lower pedal position during emergency braking, it could mean the brake pads have lost most of their friction. In this case, they must be replaced immediately to avoid serious accidents.

19

3

Share

What should drivers do when driving through waterlogged roads?

Drivers should pay special attention to slowing down and driving cautiously when passing through waterlogged roads to ensure safety. Here are the precautions to take when driving through waterlogged roads: 1. Slow down and maintain a steady speed: When passing through waterlogged roads, it is essential to slow down and maintain a steady speed. This can help avoid various dangerous situations caused by the slippery conditions of waterlogged roads to a certain extent. 2. Beware of "hydroplaning": When driving at high speeds, water between the tires and the road surface cannot be displaced, leading to a loss of friction between the vehicle's weight and the road surface. The likelihood of "hydroplaning" increases, so reducing speed is necessary to prevent its occurrence. 3. Do not restart the engine if it stalls: If the engine stalls due to water ingress, attempting to restart it immediately can cause significant damage to the engine.

6

2

Share

What is a Divided Highway Sign?

Divided highway signs indicate a roadway with two-way traffic that is separated by natural or artificial barriers, serving as a reminder for drivers to be cautious of oncoming vehicles. Here are some details about divided highway signs: 1. Precautions: When encountering a divided highway sign while driving, it means the intersecting road ahead is a divided roadway with a significant separation distance, increasing the risk of wrong-way driving. At this point, drivers should stay focused, clearly observe the road, and choose the correct lane to avoid selecting the wrong direction. Divided highway signs are designed to alert drivers to oncoming traffic, so upon seeing this sign, drivers should yield to vehicles in the same direction to reduce the likelihood of traffic accidents. 2. Features: The opposing lanes on a divided highway are widely spaced or separated by barriers. The purpose of the sign is to remind drivers that this is a two-way road, requiring attention to oncoming vehicles and careful driving.

8

2

Share

Can I apply for a B2 driver's license with a drunk driving record?

No, for those who already hold a motor vehicle driver's license and apply to add a permitted driving model, they should not have a record of 12 points in the current scoring cycle and the most recent scoring cycle before the application. If the driver was drunk driving a year and a half ago, they would be deducted 12 points at once, so they cannot apply for an additional B2 license. According to the regulations, applying to add medium-sized passenger vehicles, tractors, or large passenger vehicles to the permitted driving models must also meet the following requirements: (1) To apply for adding medium-sized passenger vehicles to the permitted driving models: the applicant must have held a license for driving city buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, or three-wheeled vehicles for more than three years, and must not have a record of 12 points in the three most recent consecutive scoring cycles before the application; (2) To apply for adding tractors to the permitted driving models: the applicant must have held a license for driving medium-sized passenger vehicles or large trucks for more than three years, or have held a license for driving large passenger vehicles for more than one year, and must not have a record of 12 points in the three most recent consecutive scoring cycles before the application; (3) To apply for adding large passenger vehicles to the permitted driving models: the applicant must have held a license for driving city buses, medium-sized passenger vehicles, or large trucks for more than five years, or have held a license for driving tractors for more than two years, and must not have a record of 12 points in the five most recent consecutive scoring cycles before the application.

5

Share

How to Use the Gears in a Training Car?

Depress the clutch to shift into a gear, which means you need to press the clutch every time you shift. Shifting techniques: 1. Master clutch pedal operation: Practice more to achieve stability. Develop a good habit—press the clutch all the way down and release it slowly. 2. Coordinate the throttle and clutch: Start by shifting into first gear, slowly release the clutch, and apply throttle when the clutch is halfway engaged. Only release the clutch fully after the car starts moving. 3. Learn the right timing for shifting: Shift when the engine reaches around 2000 RPM. First ease off the throttle, then press the clutch to avoid forced disengagement before shifting. The upshift sequence must be first gear → second gear → third gear → fourth gear → fifth gear—skipping gears is not recommended. Downshift according to speed and your car’s condition, usually when the engine RPM drops below around 1500. 4. Shift frequently while driving: Choose the appropriate gear based on speed and road conditions. Infrequent shifting can lead to lugging or engine over-revving, increasing wear and fuel consumption. Therefore, develop the habit of shifting often. 5. Make shifting smooth: Press the clutch all the way down and shift decisively. Familiarize yourself with gear positions and practice the feel. If you encounter difficulty engaging a gear (rare in modern cars), shift to neutral, release the clutch briefly, then press it again to shift. If the gear isn’t fully engaged, don’t release the clutch to avoid damaging the transmission gears.

10

3

Share

What to Do If the Windshield Has Pockmarks from Pebbles?

What to Do If the Tire Valve Cap Falls Off?

How Many Kilometers Should Truck Brake Pads Be Replaced?

What should drivers do when driving through waterlogged roads?

What is a Divided Highway Sign?

Can I apply for a B2 driver's license with a drunk driving record?

How to Use the Gears in a Training Car?

What does it mean when the EPS light comes on?

What are the precautions for trading in an old car to a 4S store?

How Many Seconds Does the Rattle Sound Last When Starting a Car?

What does 'trip' mean on a car dashboard?