What to Do If the Vehicle Management Office Refuses to Cancel the Inspection Record?

1 Answers
VonKathryn
07/25/25 4:22pm
If the vehicle fails the inspection at another testing station, the inspection record cannot be canceled, and the vehicle can only be inspected at one station. If the vehicle occupies the inspection record without being inspected at another testing station, simply call that testing station to cancel it.
Was this review help?
17
2
Share
More Forum Discussions

Does turning on the air conditioning in a car consume a lot of fuel?

Using the air conditioning in a car does indeed increase fuel consumption. When the air conditioning cooling system is activated, the electromagnetic clutch engages, the compressor operates, and the engine needs to consume more fuel to provide sufficient energy to handle this additional load. Here are the specific details: 1. Refrigerant: The refrigerant exchanges heat through liquefaction and vaporization. It has the physical properties of releasing heat when liquefied and absorbing heat when vaporized. The compressor compresses the refrigerant into a liquid state, releasing a significant amount of heat in the process. The high-pressure liquid refrigerant, cooled by the radiator fan at the front of the car, passes through an expansion valve and enters the evaporator inside the car. As the liquid refrigerant turns into a gas, it absorbs a large amount of heat, lowering the temperature. The cooled air is then blown out by the blower behind the evaporator, creating the sensation of cool air. 2. Compressor: The compressor plays a crucial role in this process and is also a major energy consumer in the entire air conditioning system. In general, electric vehicles use electric compressors, whereas traditional fuel-powered cars typically connect the compressor to the engine's crankshaft via a belt, rather than using electricity to drive it. This is the main reason why using the air conditioning increases fuel consumption.
1
1
Share

How Long Do Tires Last?

Tires generally have a lifespan of four years or 60,000 kilometers. If the tread depth is below 1.5mm or bulges appear, they need to be replaced earlier. The exact timing depends on the degree of tire wear. As the only component of a vehicle that comes into contact with the ground, tires are crucial for driving stability and safety. It is recommended that car owners replace their tires every four years, even if the mileage driven within those four years is relatively low. Tires are circular elastic rubber products mounted on metal rims, designed to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure the vehicle's driving performance.
13
4
Share

How to Remove the Blower Motor of Lavida?

Lavida blower motor removal method: First remove the glove box on the passenger side, then remove the lower panel to expose the blower motor. Rotate the blower motor counterclockwise to release it from the clips, then unplug the connector and tilt it out for removal. The Lavida is a sedan produced by Shanghai Volkswagen. The Lavida's car navigation system combines touch screen and rotary knob controls, featuring MP3 playback capability with USB, AUX, and SD card expansion slots for convenient and powerful functionality. The LCD screen adopts a foldable design. In terms of body dimensions, the Lavida measures 4605mm in length, 1765mm in width, and 1460mm in height, with a wheelbase of 2610mm.
5
1
Share

What insurance policies are needed for a sedan?

Generally, sedans require three types of insurance: compulsory traffic insurance, vehicle damage insurance, and third-party liability insurance. Insurance should be selected based on your actual situation. Compulsory Traffic Insurance: As one of the legally mandated insurances, compulsory traffic insurance requires the insurance company to compensate the affected party a certain amount if any loss is caused to a third party, regardless of fault or the need for compensation. However, in cases of at-fault traffic accidents, the cost may increase by 10%-30% based on the year or frequency of incidents. Vehicle Damage Insurance: Vehicle damage insurance is also typically necessary. For everyday issues like scratches, repair costs can be reimbursed by the insurance company. Especially in accidents where the responsible party cannot be identified, the insurance company will cover 70% of the costs. However, compensation under vehicle damage insurance is calculated based on the vehicle's usage time and depreciation, with an annual depreciation rate typically set at 7.2%. Third-Party Liability Insurance: Fully known as third-party liability insurance, this is a type of liability insurance. It covers the financial compensation that the insured must legally or conventionally bear due to their own faults or negligence causing personal injury or property damage to a third party, which is then assumed by the insurer.
12
2
Share

What type of oil does the Ruicheng CC use?

Ruicheng CC uses fully synthetic oil with a grade of 5W30. The Ruicheng CC is the first model under Changan's new design language, positioned as a sporty midsize sedan with a low-slung body line and a very sporty front fascia. In terms of dimensions, the Ruicheng CC measures 4780mm in length, 1825mm in width, and 1465mm in height, with a wheelbase of 2770mm. For power, the Ruicheng CC is equipped with a 1.5T turbocharged engine codenamed JL476ZQCD, delivering a maximum output of 156 horsepower, paired with either a manual or automatic transmission.
4
5
Share

How Often Should Wheel Rims Be Replaced?

Wheel rims do not have a specific replacement interval. However, if the rims show signs of bending, cracking, severe corrosion, or other damage, they should be replaced promptly. Failing to replace damaged rims can lead to tires slipping off the rims or even loss of vehicle control. Wheel rims are typically made through casting or forging processes, often using lightweight materials. A simple quality check can be done by tapping the rim—clear, ringing sounds usually indicate good quality. Rim sizes generally range from 12 inches to 21 inches, with 14 to 17 inches being the most commonly used. Compared to steel rims, aluminum alloy rims are lighter, more precisely manufactured, stronger, and offer lower inertial resistance during driving, which improves straight-line driving performance and can also reduce oil consumption.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.