What to Do If the Vehicle Fails OBD Inspection During Annual Inspection?

1 Answers
EmilianoFitz
07/30/25 5:33am
Failing the OBD inspection during vehicle testing is generally caused by faults in the vehicle's computer system. You can visit a 4S repair shop to diagnose and eliminate the faults, thereby clearing the fault codes. If the issue is due to an outdated OBD system or unsuccessful communication between the OBD diagnostic tool and the vehicle, you can go to a 4S shop to upgrade the vehicle system before retesting. Below are detailed solutions: 1. Vehicle has fault codes: Solution: If the warning light is off but fault codes are present, promptly update the software and OBD system. If fault codes persist after updating, visit a 4S shop to verify the existence of fault codes and clear them. If fault codes reappear after clearing, the vehicle may indeed have a fault, and immediate repair is recommended. If the 4S shop detects no fault codes, inquire whether the ECU system can be upgraded to the latest version. 2. OBD communication or connection failure: Solution: Check the vehicle's OBD port for dust and clean it before reconnecting. Inspect the OBD cable for proper functionality. Early low-end vehicles may lack emission monitoring capabilities in their ECU systems; visit a 4S shop for a system upgrade. 3. More than two readiness items incomplete: Solution: Drive the vehicle sufficiently to allow all sensors to reach optimal conditions before retesting. Perform a deeper inspection to check for fault codes. If previous methods fail to resolve the issue, visit a major repair shop or 4S shop for further diagnostics. 4. Connection failure: Solution: Upgrade the inspection station's OBD version to the latest and try again, or visit a 4S shop to check if the vehicle's OBD is registered in the database.
Was this review help?
20
4
Share
More Forum Discussions

Where is the power steering pump located on the Teana?

The power steering pump of the Nissan Teana is located under the hood, inside the engine compartment, next to the battery. The removal method for the Nissan Teana power steering pump is as follows: 1. Remove the power steering pump reservoir; it can be pulled off by hand. 2. Use a tool to remove the spring clip at the bottom. There is a small hole in the housing; insert the tool into the hole and push firmly. 3. After removing the spring clip, tap off the rear cover and remove the small retaining ring on the shaft. 4. Once the retaining ring is removed, the pump shaft and pulley can be pulled out together. 5. Then, remove the oil outlet screw in sequence and take out the pressure valve assembly inside.
8
0
Share

What kind of engine oil is suitable for Changan CS75?

Changan CS75 is suitable for Changan's original SL-grade 5W-30 engine oil, with each refill not exceeding 4.5L. The introduction to the engine oil used for Changan CS75 is as follows: Taking the 5W-30 grade as an example (the specific grade can be seen on the oil barrel), W stands for winter, which is the abbreviation of the word Winter; The number 5 before W represents the viscosity of the engine oil in a low-temperature state, and the smaller the number, the better the fluidity of the engine oil in a low-temperature state. 2. The number 30 after W represents the viscosity and high-temperature shear resistance of the engine oil at 100 degrees Celsius, and the larger the number, the more heat-resistant the engine oil is.
19
5
Share

How long is the Bora?

The length of the Bora is 4562mm. Below are the detailed specifications of the Bora: 1. Wheel size: The Bora comes with 17-inch wheels, and the original wheels are equipped with 205/55-R16 tires. The luxury and comfort versions of the Bora use 205/55-R16 tires, while the base fashion version uses 195/65-R15 tires. For standard models, good heat dissipation is a basic requirement for the wheels, and the manufacturing process typically involves paint baking, which means spraying followed by electric baking. This method is cost-effective, provides vibrant colors, and ensures long-lasting durability. 2. Configuration: The Bora is equipped with a new car navigation multimedia system, a steering wheel with integrated chrome and high-gloss black multifunction buttons, and high-quality genuine leather dual-tone seats.
5
1
Share

What is the weight of the Emgrand in kilograms?

Geely Emgrand has a curb weight of around 1.4 tons. The new Emgrand is equipped with a 1.3-liter turbocharged engine, featuring the characteristic of high torque at low speeds, which provides strong acceleration. It is paired with a mature and stable CVT transmission, and the 6MT technology is leading in its class. Here is some information about the Geely Emgrand: 1. The Emgrand is a compact sedan under the Geely brand, and all models are powered by a 1.5-liter four-cylinder naturally aspirated engine. 2. This engine delivers 109 horsepower and a maximum torque of 140 Nm, with the maximum power achieved at 6000 rpm and the maximum torque at 4400 rpm.
3
4
Share

What Are the Basic Components of a Starter?

A starter mainly consists of three parts: a DC series-wound motor, a transmission mechanism, and an electromagnetic switch. Below is a related introduction to the starter: 1. System Composition: The starting system converts the electrical energy stored in the battery into mechanical energy. To achieve this conversion, a starter must be used. The function of the starter is to generate power through a DC motor, which then drives the engine crankshaft to rotate via the transmission mechanism, thereby starting the engine. The starting system includes the following components: battery, ignition switch (starting switch), starter assembly, starting relay, etc. 2. Principle: The process by which an engine transitions from a stationary state to self-operation with the help of external force is called engine starting. Common engine starting methods include manual starting, auxiliary gasoline engine starting, and electric starting.
13
4
Share

What is the fuel tank capacity of the new Haval H6 in liters?

Haval H6 has a fuel tank capacity of 58 liters. Here is some relevant information: 1. The size of the fuel tank capacity measures a vehicle's ability to carry fuel. The fuel tank capacity determines the driving range. For two cars with identical engines, the one with a larger fuel tank can travel farther. 2. There are two main ways to find out how much fuel your vehicle's tank can hold: (1) The fuel tank capacity specified in the vehicle's user manual. (2) Practical refueling experience. Many drivers have noticed that the actual refueling amount often exceeds the manual's specified capacity. This discrepancy occurs because manufacturers measure the tank capacity from the bottom to the safety level, leaving some space from the safety level to the tank opening. This extra space ensures that the fuel can expand when temperatures rise without overflowing, maintaining safety.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.