What to Do if the Transmission Makes Abnormal Noises When Starting the Car Just After Purchase?

1 Answers
MacJuliet
07/29/25 12:42pm
The reasons for abnormal noises from the transmission when starting the car just after purchase include the following: 1. Excessive gear clearance: Usually caused by tooth surface peeling or gear tooth breakage and falling off. Immediate inspection is necessary, and replacement of parts may be required. 2. Loose drive shaft: When gears are misaligned and the grooves cannot align properly, it can cause the drive shaft to become loose. Properly installing the gears can resolve this issue. 3. Damaged pressure bearing: Excessive wear of the bearing can lead to severe damage, requiring immediate repair and replacement. To avoid abnormal noises, pay attention to the following while driving: 1. When seeing a red light ahead, do not force the car into neutral; depress the clutch while shifting. 2. Do not keep the clutch depressed when in neutral to prevent excessive wear of the clutch.
Was this review help?
6
2
Share
More Forum Discussions

When is the Best Time to Shift Gears?

Generally, the optimal time to shift gears in most cars is when the engine reaches 70% or more of its maximum torque RPM, commonly referred to as shifting at 2000 RPM. Points to note when shifting gears: First, determine if the engine is a high-speed type (where maximum torque occurs at higher RPMs). If so, shifting can be done between 2500 and 3000 RPM. Under normal circumstances, shifting around 2000 RPM is more economical (better fuel efficiency), while shifting above 2500 RPM is better for the engine. For typical family cars with a 1.6L engine, it's advisable to keep the engine RPM within the efficient range, ideally around 3000 RPM. Methods for shifting gears: When changing gears, always remember the principle of "accelerate before upshifting, decelerate before downshifting." Before upshifting, press the accelerator to increase the speed, and before downshifting, release the accelerator to reduce the speed. Acceleration shifting: Use the "double-clutching" method when upshifting. Follow the steps of "press (clutch), shift (to neutral), press (clutch), shift (to higher gear)" by quickly pressing the clutch pedal twice to smoothly shift to a higher gear. Deceleration shifting: When downshifting, follow the steps of "press (clutch), shift (to neutral), release (clutch), rev (throttle), press (clutch), shift (to lower gear)." Press the clutch twice, rev the engine once in neutral after the first clutch press, hold briefly, then press the clutch pedal again to shift to a lower gear.
11
4
Share

How to Check a Car's Warranty Period?

To check a car's warranty period, you can follow these methods: 1. Check the invoice date of the car purchase, as the warranty period is calculated from this date; 2. Review the warranty certificate. The car warranty period refers to the timeframe during which the car manufacturer provides free repairs and maintenance for faults caused by quality issues. The warranty coverage mainly includes core components of the car, which are: the engine, chassis, transmission, and drivetrain. Situations where the car warranty does not apply include: 1. Unauthorized modifications to the vehicle or altering its intended use; 2. Damage caused by improper use or traffic accidents.
6
3
Share

Which side is the brake on an automatic transmission car?

In an automatic transmission car, the brake is located on the left side, positioned below the driver's seat and the console. The brake, also known as the stopping device, refers to the action that halts or reduces the speed of moving locomotives, vehicles, other transport tools, or machinery. Its working principle involves generating significant friction by utilizing the interaction between the brake pads and discs, as well as the tires and the ground. This converts the kinetic energy of the moving vehicle into thermal energy through friction, thereby stopping the rotating parts. Automatic transmission cars eliminate the need for drivers to manually shift gears; instead, the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. The gear positions include: P (Park), R (Reverse), N (Neutral), D (Drive), S (Sport), and L (Low).
18
2
Share

How to Use Cruise Control in the Buick GL8?

To use the cruise control in the Buick GL8: Press the SET button when the vehicle reaches the desired speed. The Buick GL8 is a 5-door, 7-seat MPV with body dimensions of 5238mm in length, 1878mm in width, and 1776mm in height, with a wheelbase of 3088mm. It is equipped with a 2.0L turbocharged engine delivering a maximum power of 174kW and a maximum torque of 350Nm, with the torque peaking between 1500 to 4000 rpm. The engine is paired with a 9-speed automatic transmission. The Buick GL8 features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension.
2
3
Share

What type of oil does the Vezel use?

The Vezel uses 0W20 engine oil. The functions of engine oil include: 1. Reducing friction and damage between moving parts; 2. Absorbing heat generated in the engine combustion chamber and piston top to cool the engine; 3. Filling the gap between piston rings and cylinder liners to prevent combustion pressure leakage. The Vezel is a compact SUV with body dimensions of: length 4328mm, width 1772mm, height 1605mm, wheelbase 2610mm, fuel tank capacity of 50 liters, and luggage compartment capacity ranging from 437 to 1456 liters. It is equipped with a 1.5L naturally aspirated engine producing a maximum power of 96kW at 6600rpm and a maximum torque of 155Nm.
18
4
Share

What are the solutions for a dim reversing camera light?

The solution for a dim reversing camera light is to install some additional LED lighting bulbs around the reversing camera. The reversing camera, also known as a parking assist system, reversing visual system, or onboard monitoring system, captures real-time images of the area behind the vehicle through a rear-mounted camera and displays them on the central control screen. This allows the driver to observe the situation behind the vehicle and enhances parking safety. The meanings of the auxiliary lines in the reversing camera are: 1. The red line indicates a warning zone, where obstacles are approximately 30 cm from the rear of the vehicle—this is the optimal stopping point; 2. The yellow line indicates a caution zone, where obstacles are about 60 cm away—drivers can continue reversing but should slow down and monitor the distance; 3. The green line indicates a safe zone, with obstacles roughly 2 meters away—drivers can reverse freely within this range.
11
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.