What to do if the Touareg window suddenly stops working?

2 Answers
MaciRose
07/29/25 2:43am
Touareg window suddenly stops working for the following reasons: 1. The window regulator is damaged. 2. The regulator's fixing screws are loose, or the glass channel is deformed or damaged. Window lifting refers to the system where a car's window glass can be controlled to move up and down into position with a single button press. Cars equipped with one-touch window control have a two-stage switch for window operation. The first position works like a regular power window. The second position allows the window to automatically fully open or close with a single press and release. Regular power windows require holding the switch until the window reaches the desired position, then releasing to stop the movement. Generally, mid-to-high-end models are equipped with one-touch window control for convenience, mainly to prevent drivers from being distracted by operating windows and to improve safety. One-touch windows usually have an "anti-pinch" function to avoid the risk of pinching fingers. Solutions are as follows: Turn on the ignition, pull the switch to raise the window to the top, continue holding for 3 seconds, release the switch, then immediately press to lower the window within 3 seconds, and repeat the raising to the top once. The initialization procedure is complete, and the window will rise to the top.
Was this review help?
15
2
Share
StMelanie
08/12/25 6:38am
I've also encountered the issue of a stuck car window, which can be quite annoying. Possible causes include a blown fuse—you can find the corresponding window's fuse in the fuse box and try replacing it. Or, the switch button might have poor contact; check if the button is dirty and gently clean it. Another reason could be debris blocking the window's movement in the track—carefully inspect the track gaps for sand or small stones. For safety, never force the window while driving to avoid distracted accidents. If these simple steps don't resolve the issue, it might be a motor failure or electrical problem requiring professional tools for diagnosis. Don't delay visiting a repair shop—a malfunctioning window affects ventilation and emergency escape. I recommend regularly lubricating the track to prevent similar issues.
Was this review help?
3
4
Share
Expand All
More Forum Discussions

Which model of Changan is the Changan Ford Escort?

escort is known as the Ford Escort in Chinese, and it is a compact family sedan under Changan Ford, developed by Ford's British engineers in 1964. Its detailed specifications are as follows: 1. The Ford Escort has a body length, width, and height of 4587mm, 1825mm, and 1490mm respectively, with a wheelbase of 2687mm. 2. The Ford Escort is positioned lower than the Focus, lacking many benchmark technological features but offering more spacious interior and a more affordable price.
5
5
Share

Should the Transmission Fluid of BMW Cars Be Replaced?

Here are the reasons why transmission fluid should be replaced and the precautions for replacement: Reasons for Replacement: All transmissions (including many that claim to be maintenance-free) will experience a certain degree of degradation after several years of use, mainly due to the deterioration of the transmission fluid (including contamination or emulsification caused by other issues). Therefore, replacing the fluid is definitely more beneficial than harmful. Precautions for Transmission Fluid Replacement: 1. For automatic transmissions, the fluid generally needs to be replaced every 60,000 to 80,000 kilometers. 2. If the car is frequently driven at high speeds, it is recommended to replace the transmission fluid approximately every 40,000 kilometers. 3. For manual transmissions, the fluid can generally be replaced later, as the requirements for transmission fluid are relatively lower, and replacement can be done at around 100,000 kilometers. 4. Whenever possible, use the original manufacturer's transmission fluid for replacement. 5. Pay attention to the amount of fluid added during replacement.
18
3
Share

What is the fastest way to repair a leaking radiator?

Solutions for car radiator leaks are as follows: 1. Pipe rupture: When the car is running and a pipe ruptures causing a leak, if the crack is no more than 1mm or the hole is no more than 2mm, add a bottle of radiator sealant to the radiator and start the engine; 2. Oil emulsification causing leakage: Disassemble the engine and replace the cylinder gasket; 3. Loose radiator cap causing leakage: Check and securely fasten the cap; 4. Rubber pipe joint leakage: Use a screwdriver to adjust the rubber pipe joint, then tighten it with pliers; 5. Radiator cooling pipe rupture: Add a bottle of radiator sealant to the radiator, start the engine, then cut off the leaking cooling pipe at the leak, block the cut end with a soap-coated cotton ball, flatten the cut end with pliers, and crimp the edge to stop the leak.
7
3
Share

How to Turn on the Heater in a Chevrolet Cruze?

Method to turn on the heater in a Chevrolet Cruze: 1. After starting the Chevrolet Cruze, wait approximately 8-15 minutes for the engine to reach normal operating temperature before turning on the heater. 2. Adjust the air conditioning system to recirculate air inside the vehicle. 3. Set the Chevrolet Cruze's air conditioning to the heating mode, which is often indicated by a red zone on some vehicles. 4. Do not turn on the air conditioning compressor (do not activate the AC switch), as the heater utilizes the vehicle's own heat cycle to save energy. 5. Adjust the air conditioning to a suitable fan speed and direct the airflow as desired. 6. The direction of the warm air is generally set to blow forward and toward the feet.
10
0
Share

What to Do When Car Tires Develop Cracks?

Depending on the specific condition of the tire cracks and wear, the following corresponding measures can be taken: 1. If the tire is brand new but has minor surface cracks, it can still be used. 2. If the tire has been used for a long time and has numerous cracks, it is necessary to visit a 4S store to seek professional help for replacement to avoid tire blowouts. 3. If upon observation in the direction of travel, there is significant wear on the outer edge of the tire, it indicates that the tire is frequently underinflated, meaning the pressure is insufficient, and it needs to be inflated according to highway standards.
14
1
Share

Why Are the Production Dates of Car Glass Different?

During vehicle assembly, it is common to encounter situations where the production dates of glass components are inconsistent. An automobile assembly plant is essentially a production facility where parts are stocked in advance, making it impossible to ensure immediate assembly every time, thus making synchronization in timing difficult. Additionally, different batches of glass naturally have different production dates. Methods to check if a car's glass has been replaced include: 1. Check the manufacturer: By examining the manufacturer's code on the glass, you can identify which company produced the glass. 2. Check the glass production date: If there is a significant time difference in the production dates of the glass pieces on a car, it warrants attention as it could indicate refurbishment or subsequent replacement of the glass. 3. Check the glass label: If the car glass has been replaced, the new glass label may differ significantly from the original factory label.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.