···
Log in / Register

What to do if the tire sidewall is cut?

4 Answers
ClaireLynn
07/29/25 10:34am
Solutions for a cut tire sidewall: 1. Check whether the damage has affected the internal cord fabric material. If the sidewall is already damaged, the tire cannot continue to be used and must be replaced; 2. If the damage has not affected the cord fabric material, the tire can still be used, but it is necessary to regularly check whether the damage has expanded or if the cords are damaged. If so, the tire must be replaced. A tire is a circular elastic rubber product assembled on various vehicles or machinery for rolling on the ground. It is usually mounted on a metal rim, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance.
Was this review help?
3
3
Share
MacCaroline
08/13/25 2:57pm
If you find a cut on the tire sidewall, don't hesitate—pull over to a safe spot immediately. I had this happen last time while driving my kid to school, so I turned on the hazard lights and carefully moved to the shoulder before shutting off the engine. Sidewall damage is the most dangerous because it supports the entire tire and can easily lead to a blowout. If the damage is minor, like a surface scratch, you can drive slowly to a nearby shop for inspection. But deep cuts or bulges mean you must replace the tire. Check if you have a spare—if so, follow the manual to change it yourself and save the hassle. If not, don't risk driving; call roadside assistance or arrange for a tow truck. Regular car maintenance includes checking the tire sidewalls to prevent accumulated damage, saving money and ensuring peace of mind. Safety always comes first—don't cut corners by driving home, as the risk is too high.
Was this review help?
11
4
Share
Expand All
ElleLynn
10/07/25 5:42am
That time when I was on a long-distance trip out of town, the sidewall of my tire got slightly cut, so I immediately slowed down and pulled over at a service station to check the situation. Experience told me that sidewall damage shouldn't be taken lightly. After inspecting the depth, I promptly replaced it with the spare tire, made sure to tighten the bolts, and then drove slowly to the repair shop. Don't believe those online DIY fixes—structural damage is basically a waste of effort; you can only replace it with a new tire to avoid trouble on the road. It's advisable to carry an extra tire before heading out, check the tire pressure and wear to reduce unexpected incidents. Safe driving is all about patience and regular maintenance.
Was this review help?
6
4
Share
Expand All
DelRiley
11/20/25 7:05am
I was really startled when I accidentally scratched the tire sidewall not long after I started driving. I immediately pulled over to a safe area and called a friend for advice, not daring to move recklessly. He said damage to the sidewall could lead to cracking and it's unsafe to continue driving - either call for roadside assistance or change to the spare tire yourself, with safety as the top priority. As a new driver, remember to park properly, don't take risks trying makeshift repairs, listen to professional advice for peace of mind, and handle it with simple proper procedures.
Was this review help?
9
2
Share
Expand All
More Forum Discussions

How often should a sedan be driven at minimum?

It is recommended to drive a sedan at least once a month and run the engine for over half an hour. Precautions for long-term parking of vehicles include: 1. Clean and maintain the vehicle before parking; 2. Park the car in a garage or choose a dry and shaded area whenever possible; 3. Regularly check tire pressure and inflate promptly when insufficient, while also monitoring tire aging; 4. Thoroughly inspect items inside the car before parking, ensuring no food, beverages, or food packaging waste is left behind. The impacts of prolonged vehicle parking are: 1. Premature failure and aging of oil seals, leading to oil leaks; 2. Shortened battery lifespan; 3. Tire deformation due to prolonged pressure on contact areas; 4. Malfunctions in electronic components; 5. Oil oxidation corroding mechanical parts; 6. Aging of the braking system.
5
2
Share

What to Do If a Small Amount of Paint is Scratched Off the Car?

If a small amount of paint is scratched off the car, you can use a touch-up pen or perform a touch-up. The steps for touch-up are as follows: 1. Thoroughly clean the surface to be repaired before starting; 2. Use alcohol to remove wax, moisture, oil, and rust from the area to be repaired to enhance the adhesion of the paint film; 3. Shake the touch-up pen vigorously before use, hearing the sound of the mixing ball for at least 30 shakes; 4. Open the cap of the touch-up pen in an upright position to avoid paint spillage; 5. For deeper scratches, apply the paint repeatedly with the brush; 6. The area touched up with the pen may be slightly uneven. After the paint film dries, use 2000-grit wet sandpaper to smooth it until the surface is level with the surrounding area.
3
4
Share

How to Turn on the High Beam in a Civic?

The method to turn on the high beam in a Civic is: 1. Enter the vehicle and locate the light control lever; 2. Push the lever forward for high beam, and pull it backward for a single high beam flash. Usage of Civic's light control positions: 1. Turn the left knob to the 'off' position to turn off the lights; 2. Turn the left knob to the middle position to turn on the parking lights; 3. Turn the left knob to the lower position to turn on the low beam; 4. Use the middle knob to control the fog lights; 5. Push the lever upward for the right turn signal, and downward for the left turn signal. Adjust the Civic's light positions according to actual driving conditions and needs to ensure driving safety.
12
4
Share

How to reset the maintenance light on the Bora 1.6?

The maintenance light on the Bora 1.6 cannot be reset manually. Resetting requires the use of a specialized diagnostic tool. The first maintenance is preset by the manufacturer, and after the first maintenance, the 4S shop will set the reminder for the next maintenance. The Bora is a model under FAW-Volkswagen, with body dimensions of 4523mm in length, 1775mm in width, and 1467mm in height, and a wheelbase of 2610mm. In terms of appearance, the front design of the Bora incorporates Volkswagen's design language, integrating streamlined lines into the front design. Precise and bold lines connect the headlights with the chrome-plated grille. The contour lines of the headlights are precisely matched with the internal styling lines and complement the chrome grille, forming Volkswagen's signature front face.
14
5
Share

How to Properly Start a Geely Boyue Automatic Transmission?

To properly start a Geely Boyue automatic transmission, ensure the vehicle is stationary, depress the clutch pedal, and press the start button. Taking the 2021 Geely Boyue as an example, its body dimensions are: length 4519mm, width 1831mm, height 1694mm, with a wheelbase of 2670mm, fuel tank capacity of 58 liters, and curb weight of 1575kg. The 2021 Geely Boyue features a MacPherson strut independent front suspension and a multi-link non-independent rear suspension. It is equipped with a 1.8L turbocharged engine, delivering a maximum horsepower of 163PS, maximum power of 120kW, and maximum torque of 250Nm, paired with a 6-speed manual transmission.
17
3
Share

What is the role of the planetary gear mechanism in an automatic transmission?

The role of the planetary gear mechanism in an automatic transmission is: 1. To use clutches and brakes to change the relative motion relationships of the components within the planetary gear mechanism; 2. To achieve different gear transmissions, altering the transmission ratio and direction. The planetary gear mechanism consists of a sun gear, ring gear, planetary carrier, and planet gears. The working principles of the planetary gear mechanism are: 1. Power is input from the sun gear and output from the ring gear, with the planetary carrier locked by the mechanism; 2. Power is input from the sun gear and output from the planetary carrier, with the ring gear locked; 3. Power is input from the planetary carrier and output from the sun gear, with the ring gear locked; 4. Power is input from the planetary carrier and output from the ring gear, with the sun gear locked.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.