···
Log in / Register

What to Do if the Tire is Deformed?

3 Answers
CamilleLee
09/07/25 7:41am
Tire deformation requires timely replacement of the tire; otherwise, it may lead to issues such as driving deviation, wheel vibration, and abnormal wear. The main causes of tire deformation include the following: Frequent aggressive driving: Under normal urban driving conditions, a set of tires can last for many years. However, the same set of tires may be worn out in less than a day if used on a racetrack for a few laps. Neglecting tire pressure checks: Excessive tire pressure can cause the tire to bulge due to high pressure, increasing wear over long-term driving. Conversely, insufficient tire pressure can lead to deformation on both sides of the tire wall. Long-term driving under low pressure not only accelerates wear on the tire wall but also increases the risk of a blowout. Deformation of the inner steel wires in the tire: Punctures or severe impacts can cause the steel wire layer inside the tire to break, leading to deformation. Alternatively, the tire may deform due to insufficient tire body strength or poor quality of the belt layer and cords.
Was this review help?
15
5
Share
MacAnastasia
09/19/25 6:47am
I immediately pulled over to a safe spot when I noticed tire deformation. Driving with a deformed tire causes severe steering wheel vibration, especially at high speeds, which can easily lead to a dangerous blowout. I'll check the tire surface for bulges or cracks. If the deformation is minor, it might just be low tire pressure, and inflating it could help. But if the deformation is significant, I must change to the spare tire immediately. Then, I'll drive to a professional repair shop as soon as possible to diagnose the issue—it's often due to tire aging or internal damage. If new tires are needed, I won't hesitate to replace them; safety isn't worth skimping on. I make it a habit to check tire pressure monthly to maintain proper levels and avoid curbs when parking to prevent deformation. Safety comes first—never risk driving dangerously just to save time.
Was this review help?
4
2
Share
Expand All
AlexandraMarie
11/02/25 7:09am
As a long-time car owner, my experience is not to panic immediately if you notice tire deformation. First, stop and check the tire pressure to see if there's any air leakage. If the deformation isn't severe and you drive slowly, you might be able to make it to a repair shop, but you must monitor the wheel balance - if the vibration becomes too strong, you must stop driving and replace the tire immediately. If you're handy, you can change to the spare tire yourself. I usually keep a jack and wrench in my car for quick operations. There are many causes of deformation, such as long-term underinflation or internal structural damage from impacts. Delaying repairs can accelerate wear. I recommend regular tire inspections, especially checking the sidewalls for bulges, and addressing any issues immediately. When driving, be mindful of road potholes and avoid hitting them hard - prevention is the most effective way to ensure safe and smooth driving.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

Why Is the Engine Fan Not Turning?

There may be several reasons why the car radiator fan is not turning: 1. Whether the water temperature has reached the required level: Most modern car radiator fans operate using electronic temperature control, so the fan will only start turning normally when the internal water temperature reaches the required level. If the temperature is too low, the radiator fan will not turn. Therefore, if the car radiator fan is not turning, the first thing to check is whether the water temperature has reached the required level. 2. Relay malfunction: If the water temperature is appropriate but the car radiator fan still does not work, the issue might be with the fan's relay. If the relay is faulty, the car's radiator fan will not function.
14
4
Share

What brand is honour tires?

honour is a tire brand under Qingdao Aonuo. Qingdao Aonuo Group Co., Ltd. was established in 1998 and is one of China's major tire manufacturers. Below is relevant information about honour tires: 1. Tires should not be stored outdoors to avoid sunlight exposure. The storage environment temperature should be between -10°C and +30°C, with humidity at 50-80%. The warehouse should be at least 1 meter away from heat sources and ozone generators. 2. Tires should not be stored in the same warehouse with oils, acids, flammable materials, or chemically corrosive substances. 3. Tires should be stored upright, with a maximum stacking height of three layers. Rotate their positions every two months, and do not stack them flat. Do not remove the outer packaging during storage.
4
5
Share

Should You Cover Your Car with a Car Cover During a Typhoon?

It is best not to cover your car with a car cover during a typhoon, as it can easily be blown away. Here is some relevant information: 1. Paint Protection Film (PPF): PPF is a high-performance, eco-friendly film widely used in the automotive detailing industry. It is commonly known as a transparent paint protection film. It has exceptional toughness and, once applied, isolates the car's paint from the air, providing long-lasting protection. 2. Product Features: Excellent elasticity and superior tensile strength; can be applied to any curved surface; resists yellowing for over 3 years and aging for over 5 years; crystal-clear transparency that blends seamlessly with the car's original paint without altering its color; enhances the paint's gloss by 5%-20%; protects against damage from oil, grease, weak alkalis, gravel, acid rain, and other harmful elements.
2
0
Share

What does the reduced engine power warning in the Highlander mean?

The warning of reduced engine power in the Highlander means carbon buildup on the spark plugs or insufficient power. Below are the specific details about the Highlander: 1. Vehicle Positioning: The Highlander is a large-sized SUV produced by Toyota. 2. Configuration: It is equipped with a 6.1-inch central control display screen with physical buttons on both sides, supporting basic Bluetooth multimedia entertainment systems. It also features the TSS (Toyota Safety Sense) intelligent safety assistance system, which includes PCS (Pre-Collision System), DRCC (Dynamic Radar Cruise Control System), LDA (Lane Departure Alert System), and AHB (Automatic High Beam) functions. 3. Chassis: The Highlander uses a front MacPherson independent suspension and a rear double-wishbone independent suspension.
4
3
Share

What to Do When the Focus Engine Temperature is High and Prompts to Park Safely?

When the Focus engine temperature is high and prompts to park safely, there may be several situations: 1. Reason: The engine temperature is too high, and the dashboard will display a warning. It is an icon resembling a thermometer, called the coolant temperature warning light. When this icon lights up, it indicates insufficient coolant, which naturally leads to high engine temperature. 2. Coolant Temperature Gauge: Some models have a coolant temperature gauge on the dashboard. Under normal circumstances, the needle of the gauge points to the middle position. Some use numbers to indicate, while others use letters. One end is the letter 'C' indicating lower coolant temperature, and the other end is the letter 'H' indicating excessively high coolant temperature.
9
5
Share

What are the reasons for engine speed limitation?

Engine speed limitation may have the following reasons: 1. Fuel system issues: The fuel system includes low-pressure and high-pressure fuel circuits. Blockage in the low-pressure fuel inlet, insufficient fuel supply, or compression of the return fuel line can trigger the limp-home fault mode; high-pressure fuel circuit leaks, flow metering unit failure, high-pressure fuel pump damage, fuel injector inlet leaks, or stuck injector needles can also cause limp-home faults. 2. Sensor issues: National III engines adopt more user-friendly designs with greater consideration for safety factors. The ECU has an overheat protection function that activates when water temperature, oil temperature, or intake air temperature is too high, limiting engine power. The engine enters limp mode. In the market, service often encounters fault phenomena caused by damaged water temperature sensors or oil pressure/temperature sensors leading to limp mode.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.