···
Log in / Register

What to Do if the Tire is Deformed?

3 Answers
Paige
09/01/25 5:04am
Tire deformation requires prompt replacement of the tire; otherwise, it can lead to issues such as driving deviation, wheel vibration, and abnormal wear. The main causes of tire deformation are as follows: 1. Frequent aggressive driving: Under normal city driving conditions, a set of tires can last for many years. However, the same set of tires may be ruined in less than a day if used for a few laps on a racetrack. 2. Neglecting tire pressure checks: Excessive tire pressure can cause the tire to bulge due to overpressure, increasing tire wear over long-term use. Conversely, insufficient tire pressure can lead to deformation on both sides of the tire wall. Long-term driving under low pressure not only increases wear on the tire wall but also poses a risk of tire blowout. 3. Deformation of the inner steel wires in the tire: Punctures or severe impacts can cause the steel wire layer in the tire to break, leading to deformation. Alternatively, the tire body may lack sufficient strength, or the quality of the belt layer and cords may be inadequate.
Was this review help?
12
1
Share
VincentRose
09/13/25 7:50am
Don't delay if your tire is deformed—safety risks are my first concern. In this situation, pull over immediately and stop driving, as the deformation could be caused by sidewall bulges or impact with hard objects. Continuing to drive may lead to a blowout or loss of balance, which is no small matter. Common causes include tire aging, low pressure, or high-speed collisions with potholes, all of which can damage the tire's structure. Next, inspect the tire yourself for obvious bulges, tears, or unevenness. If you're on the highway, turn on your hazard lights and ensure safety before taking action. I recommend switching to the spare tire right away. If you don’t have one, head to the nearest repair shop or dealership for inspection—don’t try to save money or limp home. For prevention, regularly check tire pressure—glance at the gauge every time you wash your car and keep it at the recommended level. Avoid potholes and rotate your tires periodically to extend their lifespan. In short, prioritize driving safety—prompt action saves trouble, money, and lives.
Was this review help?
14
2
Share
Expand All
DiAlex
10/27/25 8:33am
Last time my car tire was deformed, it gave me a real scare, so I quickly figured out a solution on my own. First, pull over calmly and check if it's punctured by something or if it's a pressure issue. If it's just a slight dent, try inflating the tire to the standard pressure to see if it can be temporarily fixed. But if there's a bulge, it means the internal steel wires are broken, and you must replace the tire immediately without hesitation. What I can do myself is use the tools in the trunk to change to the spare tire—jack up the car, loosen the lug nuts, and remember to tighten them after replacing the spare. If you don’t have the tools, go to a nearby repair shop for help. Cost-wise, buying a new tire usually ranges from 200 to 1000 RMB, depending on the brand—don’t go for cheap, low-quality ones or you’ll lose out more. For prevention, make it a habit to check the tire pressure monthly or install a tire pressure monitor to avoid worrying on the road.
Was this review help?
11
0
Share
Expand All
More Forum Discussions

What are the solutions for a dent in the front bumper?

The solutions for a dent in the front bumper are: 1. Use hot water to heat the dented area, which can help pop the dent out; 2. Once the dent is restored to its original shape, immediately cool the area that was heated with hot water by applying cold water to allow the rubber to contract and recover; 3. Remove one of the car's screws, reach inside the bumper from the body, and push from behind to fix the dent. The functions of the front bumper are: 1. To absorb and mitigate external impacts during collisions, providing a cushioning effect to protect both the vehicle and the driver; 2. To harmonize with the vehicle's overall design, offering good decorative appeal.
4
1
Share

What is a car malfunction?

Car malfunction refers to the situation where the vehicle's systems, assemblies, components, or the entire vehicle lose their specified functions. The malfunctions include: 1. Engine failure to start: Battery damage, as the engine relies on the battery for ignition. Rust or leakage in the battery can prevent the engine from starting; 2. Poor idle operation: Unstable idle speed and engine shaking, which are related to faults or poor performance of components such as the fuel injector, oxygen sensor, air flow sensor, exhaust gas recirculation valve, etc.; 3. Car leakage: Including fuel leakage, oil leakage, coolant leakage, brake fluid leakage, power steering fluid leakage, lubricant leakage, refrigerant leakage, as well as electrical system leakage of battery fluid and electrical system short circuits.
3
3
Share

Can a new car be registered on Saturday?

New cars cannot be registered on Saturday. Below is relevant information about vehicle registration: Required materials: For registration, you need to bring the identity proof of the vehicle owner; proof of vehicle origin such as the purchase invoice; the vehicle's complete factory qualification certificate or import certificate for imported vehicles; vehicle purchase tax payment proof or tax exemption certificate; compulsory traffic accident liability insurance certificate, and other materials. Registration time: If all materials are complete and there are not many staff at the vehicle management office, the registration of a new car can be completed in one morning. Notes: The vehicle management office should, within two days from the date of accepting the application, confirm the vehicle, verify the vehicle identification number imprint, review the submitted proofs and certificates, and issue the vehicle registration certificate, license plate, driving license, and inspection qualification mark.
17
1
Share

Where is the Correct Position of the Steering Wheel?

The correct position of the steering wheel is in the middle directly below the car's dashboard. Here is a related introduction to the steering wheel: Function: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger-diameter steering wheel reduces the hand force required from the driver when turning. The steering intermediate shaft serves as a connecting component between the steering gear and the steering shaft, facilitating the standardization of the steering gear, compensating for errors during manufacturing and installation, and ensuring a more rational installation of the steering gear and steering wheel in the vehicle. Fault Diagnosis: Drive at a speed of 15 kilometers per hour on a relatively open road. While driving, turn the steering wheel left and right to check if it operates smoothly and whether there is any lack of return force. Also, observe if the vehicle deviates from its path when the steering wheel is released.
9
1
Share

How Many Years Can You Take the Driving Test?

You can take the driving test for 3 years. Below is the relevant introduction to the driving license test: Test Process: Applicants for a motor vehicle driving license must pass the following four subject tests: Subject 1 (Road Traffic Safety Laws, Regulations, and Related Knowledge Test), Subject 2 (Venue Driving Skills Test), Subject 3 (Road Driving Skills Test), and Subject 4 (Safe and Civilized Driving Knowledge Test). The test sequence is conducted in the order of Subject 1, Subject 2, Subject 3, and Subject 3 Theory (i.e., Subject 4, as there is no official term 'Subject 4'). Only after passing the previous subject test can the applicant proceed to the next subject test. Test Requirements: The Vehicle Management Office shall accept applications from those who meet the conditions for a motor vehicle driving license and arrange the test according to the scheduled date. The test sequence follows Subject 1, Subject 2, and Subject 3. Only after passing the previous subject test can the applicant proceed to the next subject test. After passing the Subject 3 Road Driving Skills Test, the applicant can then take the Safe and Civilized Driving Knowledge Test.
4
1
Share

What are the starting steps for an automatic transmission car?

The starting steps for an automatic transmission car are: 1. Insert the key and turn it to the second position (accessory power mode); 2. Press the brake pedal and push the start button to ignite the engine; 3. Shift the gear from P (Park) to D (Drive); 4. Release the brake pedal, and the vehicle will start moving forward slowly; 5. Gently press the accelerator pedal to begin accelerating. The parking steps for an automatic transmission car are: 1. Press the foot brake to stop the vehicle; 2. Shift the gear from D to N (Neutral); 3. Engage the handbrake; 4. Release the foot brake without turning off the power; 5. Press the foot brake again and shift the gear from N to P; 6. Release the foot brake and press the start/stop button to turn off the power.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.