What to do if the Tiggo 8 cannot read USB?
5 Answers
The USB drive can be recognized by the host when plugged into the Tiggo 8's USB port, provided that the song format is MP3 and the USB drive is formatted in FAT32. Below is extended information about USB: 1. Universal Serial Bus (USB) is a serial bus standard and a technical specification for input/output interfaces. It is widely used in information and communication products such as personal computers and mobile devices, and has been extended to other related fields like photographic equipment, digital TVs (set-top boxes), and gaming consoles. 2. The latest generation is USB 3.1, with a transmission speed of 10Gbit/s, three-stage voltage of 5V/12V/20V, maximum power supply of 100W, and the new Type-C connector is no longer orientation-dependent.
Last time my Tiggo 8 also couldn't read the USB, which was really frustrating. I guess the problem might be in a few areas: the USB drive itself is broken or formatted incorrectly in the car, so you should first try plugging in another device to see if it can be recognized; then check if the USB port has dust or is loose, and gently clean it with a soft brush; sometimes the car's infotainment system freezes, so try restarting the car—turn off the engine and wait a few minutes before starting it again; if it still doesn't work, the multimedia software might need an update, so go to the 4S shop and have them help with the update. By the way, don't use USB drives with too large a capacity or too fast a speed—the Tiggo 8 generally supports FAT32 format, so if it works on a computer, it should be fine in the car. I usually rely on USB for music while driving, so if you run into problems, don't mess around with it—get it fixed by a professional early on, safety first.
As a car enthusiast who often does minor modifications, I believe USB reading issues should be approached from a compatibility perspective. The Tiggo 8 has strict requirements for USB drives, such as the file system needing to be FAT32 or exFAT—NTFS won't work; newer USB drives or those exceeding 32GB in capacity are also prone to problems, so first check the formatting settings on a computer. Another issue could be poor interface contact—try gently wiggling the USB or testing other ports; system cache shortages can also cause failures, in which case a soft reboot of the infotainment system should help. Once, when I dealt with a similar issue, I found that an older version of the car's system had major bugs, and updating the software fixed it—check the official website for firmware updates or visit a 4S shop for an upgrade. Don’t forget to prevent port aging by covering the ports when parked to reduce dust buildup and maintain electronic stability.
A brief discussion on solutions for USB not reading: First, try using a different USB drive to rule out a faulty device; second, clean the port of dust, carefully using a tissue or air blower; third, restart the car's system by turning off the engine and waiting a few seconds before restarting. If it still doesn't work, it might be a system malfunction or wiring issue—don't force it, just head straight to the repair shop. When using a USB drive daily, avoid inserting or removing it too forcefully, and be mindful of overheating affecting read performance.
I always remind myself that driving safety comes first. Although a malfunctioning USB may seem minor, it can distract from navigation. First, pull over safely and check if the USB drive works normally on a computer. If it only fails in the car, it's likely a format or connection issue. Clean the USB port to avoid dirt and make it a habit to have technicians inspect electronic components during routine maintenance. If the problem persists, don't delay—visit the dealership to fix system bugs to prevent affecting driving focus. Prevention is key: avoid using low-quality USB drives and keep wiring tidy.
