What to Do If the Sunroof Sunshade Fabric Falls Off?

3 Answers
OAna
07/29/25 6:57am
If the sunshade is damaged and can no longer be used, you can purchase a new sunshade at a 4S store for replacement. Alternatively, you can buy the parts online and repair the sunshade yourself. A sunshade is a product placed on the windshield or window glass when sunlight directly hits the car. More details about the sunshade are as follows: 1. Introduction One: Although the principle utilized by the sunshade can temporarily suppress the rise in cabin temperature, the overall environment remains unchanged. All components of the car conduct heat, so if the car is parked for an extended period, the cabin temperature will still rise. A small sunshade will not make a significant difference. 2. Introduction Two: This sunshade is not entirely without effect. The reason is that without a sunshade, direct sunlight entering the car can cause the temperature of the dashboard to rise, even reaching over 60 degrees. With the sunshade, most of the heat is absorbed by it, and the temperature of the interior will align with the cabin temperature. Therefore, while the sunshade does not alleviate the rise in cabin temperature over long parking periods, it does help reduce the temperature rise of the interior components and slow down the aging of the interior.
Was this review help?
8
1
Share
SanAdelyn
08/12/25 11:15pm
That time the fabric of my car's sunroof shade also fell off, which was really annoying. I was just out for a drive when the fabric started dangling and swinging around, blocking my view. I quickly pulled over and used a plastic bag to temporarily hold it down, but that wasn't a long-term solution. Later, I took it apart myself to check and found that the old adhesive had failed and the plastic parts had loosened. I temporarily reattached it with strong double-sided tape, which worked okay but came loose again after a week. I suggest first trying to reinforce it with tape yourself. If you're not handy or can't manage it, just go to a nearby repair shop or the dealership. They have professional tools and can fix it in a few dozen minutes, even replacing parts to prevent future issues. Don't underestimate this problem—having it fall off while driving is not only distracting but also lets dust in, dirtying the interior and affecting your mood while driving.
Was this review help?
6
0
Share
Expand All
SabrinaLynn
10/04/25 4:58am
Last week, the sunshade fabric of my car's sunroof suddenly fell off, making me nervous while driving, especially when taking the kids on a countryside trip with the sun blazing directly inside. I immediately slowed down and pulled over, using my backpack to weigh down the fabric to prevent it from flapping around, then took photos to document the issue. Taking it straight to the repair shop was the easiest solution—the mechanic said this is a common problem caused by adhesive aging or rusted sliding tracks. They would disassemble it, clean, and reinforce it, costing around a hundred bucks, which is better than DIY and avoids damaging other parts. A reminder to everyone: regularly maintain your sunroof, lubricate the tracks to reduce looseness, and don’t wait until something breaks to rush a fix—safety first!
Was this review help?
2
5
Share
Expand All
More Forum Discussions

Should You Use the Front Brake or Rear Brake on a Motorcycle?

Motorcycle braking should primarily use the rear brake. Function of the front brake: When traveling at higher speeds, the center of gravity shifts forward due to the high speed, making the front brake more effective. However, braking at high speeds is more dangerous and should be gradually adapted from slow to fast. When braking, do not depress the clutch or downshift. This allows full utilization of the engine's braking performance to shorten the braking distance and more reliably ensure that the braking does not lose control. Once the speed has been sufficiently reduced through braking, you can then pull in the clutch and downshift to the appropriate gear. Motorcycle braking principle: The pressure for the front brake is generated by the master cylinder located at the base of the brake lever. Squeezing the brake lever moves the piston inside the master cylinder, applying pressure to the brake fluid. This pressure is transmitted through the brake line to the piston in the brake caliper, which then presses the brake pads against the disc rotor.
9
3
Share

What Causes Shaking During Acceleration from 80 to 100 km/h When Pressing the Accelerator?

Shaking during acceleration from 80 to 100 km/h when pressing the accelerator is caused by damaged spark plugs or poor fuel quality. Damaged spark plugs: The most common issue causing shaking during acceleration is damaged spark plugs. Wear of the spark plug electrode gap leads to insufficient sparking, resulting in incomplete combustion of the air-fuel mixture and shaking during acceleration. Additionally, cracks in the ceramic part of the spark plug can prevent it from sparking, causing one cylinder to stop working, which also leads to shaking during acceleration. Poor fuel quality: Poor fuel quality affects the atomization effect of the fuel injectors, leading to incomplete combustion of the air-fuel mixture in the cylinder, which can also cause idle shaking. It is recommended to use higher-grade gasoline after finishing the current tank and perform a fuel system cleaning.
18
0
Share

Why Can't I Apply for Exemption from Inspection via 12123?

12123 exemption from inspection application generally refers to the online right to directly apply for inspection exemption for relatively new vehicles within 6 years. It might be because the vehicle is too old. Regulations regarding annual inspection: For new vehicles within 6 years, they can be exempted from inspection twice, with inspections required at the 6th and 8th year when the vehicle needs to go through the inspection line. For private vehicles over 10 years old, the original inspection cycle still applies, i.e., annual inspection for vehicles aged 10 to 15 years, and semi-annual inspection for vehicles over 15 years old. Cases where annual inspection fails: When a registered motor vehicle undergoes safety technical inspection, if the registered content on the motor vehicle's driving license does not match the relevant information of the vehicle, or if the compulsory third-party liability insurance certificate for the motor vehicle is not provided as required, the inspection will not be passed.
9
2
Share

Why is the fuel consumption so high during the motorcycle break-in period?

The high fuel consumption during the motorcycle break-in period is due to the motorcycle's weight not matching the rider's driving style, or the carburetor not being an economical type. Introduction to the motorcycle break-in period: The break-in period of a motorcycle refers to the time after purchasing a brand-new motorcycle when it hasn't been used before. During this period, the engine components and endurance require some time to adapt, which is called the break-in period. During this period, it's best not to exceed a speed of 60 km/h or carry a load over 50 kg. It's also advisable not to ride continuously for more than two hours at a time, and remember to change the engine oil frequently. Precautions during the break-in period: Strictly adhere to speed limits, load restrictions, and regular maintenance during the break-in period to reduce wear and tear on the engine and transmission components. This will also help fully utilize the new motorcycle's performance and extend its service life.
1
1
Share

What is the optimal position to fill engine oil on the dipstick?

It is most appropriate to fill the engine oil slightly above the midpoint between the lower and upper limit lines on the dipstick. Dipstick markings: There are two markings on the dipstick: a maximum mark and a minimum mark. The normal oil level should not be above the maximum mark or below the minimum mark. The normal range is between these two marks. Method for checking oil level: After adding oil, start the vehicle and then check the oil level 3 minutes after turning off the engine. This is because when changing the oil, the oil filter also needs to be replaced. The new oil filter initially contains no oil, and oil will flow into it after starting the vehicle. Waiting 3 minutes allows the oil to settle in the oil pan. This method ensures a more accurate oil level reading. Note that you should not check the oil level on a slope, as the tilted position of the vehicle will cause the oil in the oil pan to tilt as well, resulting in an inaccurate reading.
8
5
Share

What does 6-speed wet dual-clutch mean?

6-speed wet dual-clutch means that the vehicle is equipped with a 6-speed dual-clutch transmission, where '6-speed' refers to the transmission having six gear ratios. The definition and advantages of a dual-clutch transmission are as follows: Definition of Dual-Clutch Transmission: A Dual-Clutch Transmission (DCT) differs from conventional automatic transmission systems. It is based on a manual transmission but belongs to the automatic transmission category. In addition to offering the flexibility of a manual transmission and the comfort of an automatic transmission, it also provides uninterrupted power output. Advantages of Dual-Clutch Transmission: The gear shift time of a dual-clutch transmission is extremely short, even faster than that of a manual transmission, taking less than 0.2 seconds. Because the dual-clutch transmission eliminates torque interruption, meaning the engine's power is continuously utilized and always operating at its optimal level, it can significantly save fuel. Compared to traditional planetary gear automatic transmissions, it is more conducive to improving fuel economy, with fuel consumption reduced by approximately 15%.
7
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.