···
Log in / Register

What to do if the substitute driver commits a traffic violation?

4 Answers
KathrynAnn
09/01/25 5:25am

When a Level 4 substitute driver causes traffic violations resulting in point deductions or fines, the vehicle owner can first negotiate privately with the substitute driver, who should be responsible. Preserve relevant evidence of the substitute driver's violation, including order details, signed agreements, and the violation time obtained from the traffic management bureau. If negotiation fails, the vehicle owner can file a complaint with the substitute driver's company to protect their legal rights.

Was this review help?
3
2
Share
DiJessica
09/13/25 8:09am

If the designated driver I hired commits a traffic violation, I will immediately check the details of the violation notice, such as the location of speeding or running a red light. As the vehicle owner, I need to contact the designated driver or the platform to clarify who is responsible for the fine and liability. For example, when hiring through a formal platform, they will handle the costs; but if it's a private arrangement, I recommend signing an agreement in advance to define responsibilities. The steps to handle it include paying the fine through the traffic police app or website and checking if it affects my driver's license points. For prevention, I will record the driving process to avoid similar issues. Remember, safe driving is key—don't delay and risk affecting insurance or causing disputes. With good communication, the issue can be resolved easily, ensuring smoother trips next time.

Was this review help?
7
3
Share
Expand All
Vivian
10/28/25 2:08am

When I accidentally violate traffic rules while serving as a designated driver, I remain calm and verify the details on the ticket, such as speed limits or signal timing. Then, I promptly inform the car owner, admit the mistake, and proactively take responsibility for the fine to avoid inconveniencing them. If working through an app, the platform might assist in handling it; for private designated driving, I pay directly. I also reflect on the cause and learn to better comply with regulations next time: for instance, not rushing and checking the speedometer. After resolving the issue, I monitor my points status, as it impacts my profession. Ultimately, a responsible attitude helps build the owner's trust, minimizes disputes, and ensures service reputation.

Was this review help?
15
0
Share
Expand All
MacVivian
12/11/25 2:24am

The key to handling violations by a designated driver lies in responsibility division and timely response. Typically, the car owner handles the fines, but if the violation is due to the designated driver's fault, compensation is required. After reviewing the notice, I negotiate who pays; then use a traffic app to process the payment to avoid late penalties. Points deduction is borne by the driver, and serious violations may lead to legal consequences. To minimize risks, I emphasize signing an agreement in advance to document details and promote safety awareness, such as reminding the designated driver of speed limits to prevent potential hazards from escalating and affecting daily travel. In short, take swift action to protect the interests of all parties.

Was this review help?
3
4
Share
Expand All
More Forum Discussions

What Are the Solutions for a Submerged Car?

The solutions for a submerged car are: 1. Tow the car to a dry area; 2. Tow the car to a repair facility for further handling. Reasons for a car stalling in water: 1. Moisture or water ingress causing a short circuit in the high-voltage distribution system; 2. Water entering the exhaust pipe; 3. Water entering the air intake, specifically at the air filter; 4. Engine damage due to water ingress, leading to stalling. Precautions for driving in rainy weather or through waterlogged areas: 1. Be extra cautious when the water depth exceeds the front bumper; 2. Do not continue driving if the water depth exceeds the engine hood; 3. Avoid driving at high speed through ditches or puddles; 4. Maintain a sufficient safe distance.
15
3
Share

How to Enable the Auto-Lock Feature for Honda Civic?

Honda Civic's auto-lock feature can be enabled by accessing the central control panel settings and turning on the auto-lock function. Taking the 2021 Honda Civic as an example, its body dimensions are: length 4517mm, width 1799mm, height 1434mm, with a wheelbase of 2700mm, a fuel tank capacity of 47 liters, and a curb weight of 1343kg. The 2021 Honda Civic features a MacPherson strut independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 177PS, a maximum power of 130kW, and a maximum torque of 220Nm, paired with a continuously variable transmission (CVT).
14
3
Share

What is the starting method for an automatic transmission car?

The starting method for an automatic transmission car is: 1. Turn the ignition key to the power position to allow the car's computer system to begin self-checking for about 6 seconds; 2. Press the foot brake, shift the gear from P to N, then turn the ignition key to the start position to ignite the engine after releasing the foot brake; 3. Press the foot brake, release the handbrake, shift the gear from N to D, and slowly release the foot brake. An automatic transmission car is equipped with an automatic gearbox, and its working principle is: Through the coordination of the torque converter and gear transmission system, it automatically shifts gears based on the car's speed, engine RPM, and power load. The hydraulic control device adjusts the shifting timing by controlling the transmission fluid volume according to the throttle opening.
8
1
Share

What is the method for using car lights?

The method for using car lights is: 1. Turn the left light control switch forward one notch for parking lights; 2. Turn it forward two notches for low beam; 3. Push the light control lever forward once for high beam; 4. Lift the light control lever upward once for the right turn signal. Precautions for using car lights are: 1. Turn on low beam when driving at night; 2. Do not use high beam when a following vehicle is driving close to the vehicle in front in the same direction; 3. When passing sharp curves, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, alternate between high and low beams to signal.
16
5
Share

Can Tap Water Be Used as Car Windshield Washer Fluid in Summer?

Tap water should not be used as car windshield washer fluid in summer because it dilutes the washer fluid, reduces its effectiveness, and may damage the wiper blades. The functions of windshield washer fluid include: 1. Cleaning the windshield to maintain clear visibility; 2. Providing antifreeze and defogging properties; 3. Offering anti-static, lubrication, and anti-corrosion effects. The steps to add windshield washer fluid are: 1. Open the engine hood and locate the washer fluid filler port; 2. Remove the cap and pour the washer fluid into the reservoir; 3. Observe the fluid level until it reaches the marked line. The characteristics of car windshield washer fluid are: 1. Cleaning capability; 2. Antifreeze performance; 3. Defogging performance.
15
4
Share

What Causes a Car to Lack Power When Climbing Hills?

There are several reasons why a car may lack power when climbing hills: Fuel Quality Issues: If the fuel used is of poor quality, containing excessive impurities or water, it can lead to insufficient power. Low-quality fuel can easily clog components with small openings or filtration functions, such as the fuel filter, fuel pump screen, and fuel injectors, resulting in poor fuel supply and reduced engine performance. High Gear Selection: When climbing hills, using too high a gear makes it difficult to increase the engine speed. For manual transmission vehicles, it is generally advisable to use gears 1 to 3 depending on the situation. For automatic transmission vehicles, if the slope is too steep, it is recommended to use the L gear, 1st gear, or 2nd gear. Carbon Buildup: Excessive carbon deposits on the throttle body and intake pipes can restrict airflow, leading to incomplete fuel combustion, which directly affects power output and increases fuel consumption. If the fuel injectors are clogged, fuel atomization may be poor or nonexistent, causing a cylinder misfire and reducing engine output power, resulting in insufficient power. Low or Unstable Idle Speed: If the vehicle's idle speed is too low or unstable, it can easily cause a lack of power when climbing hills. There are many potential causes for such issues, including wiring problems, sensor faults, engine combustion issues, or air intake leaks. External faults can also have an impact. Therefore, it is essential to identify the root cause before proceeding with further inspections. Faulty Ignition Coil: A damaged ignition coil can cause misfiring or complete failure to ignite in one cylinder, leading to insufficient power. This is often accompanied by noticeable engine vibrations, which can be easily felt inside the vehicle.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.