What to Do If the Shock Absorber of Tiggo 3 Is Leaking Oil?

1 Answers
OJaxson
07/29/25 8:13pm
Tiggo 3 shock absorber oil leakage requires direct replacement of the shock absorber, as it cannot be repaired. The shock absorber is used to suppress the oscillation when the spring rebounds after absorbing shock and the impact from the road surface. It is widely used in automobiles to accelerate the attenuation of the vibration of the frame and body, thereby improving the driving smoothness of the vehicle. The changes in shock absorber damping during driving are as follows: 1. During the compression stroke, the axle and frame move closer to each other, and the damping force of the shock absorber is small to fully utilize the elasticity of the elastic element and mitigate the impact. At this time, the elastic element plays a major role; 2. During the suspension extension stroke, the axle and frame move away from each other, and the damping force of the shock absorber increases to quickly absorb the shock; 3. When the relative speed between the axle or wheel and the axle is too high, the shock absorber is required to automatically increase the fluid flow, keeping the damping force within a certain limit to avoid bearing excessive impact loads.
Was this review help?
6
0
Share
More Forum Discussions

How much horsepower does the Trumpchi GS4 have?

1.3T engine has a maximum power of 137 horsepower, and 1.5T engine has a maximum power of 152 horsepower. The Trumpchi GS4 has good exterior configurations. Body dimensions: The length, width, and height of the GAC Trumpchi GS4 are 4510mm, 1852mm, and 1708mm respectively, with a wheelbase of 2650mm. Power: The 1.3T engine has a maximum power of 101kW (137Ps) and a peak torque of 202N·m; the 1.5T engine has a maximum power of 112kW (152Ps) and a peak torque of 235N·m.
9
1
Share

Can the BYD Song Pro Keep ECO Mode On All the Time?

No, it cannot be kept on all the time. It is suitable for urban driving but not for highways. In urban areas, especially during congested traffic conditions, strong power output is not necessary, and frequent stops and starts result in higher fuel consumption. Enabling ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. There are a few situations where ECO mode is unnecessary: 1. When the car is driving at high speeds (up to 100km/h). 2. When high torque output is required. Location of the ECO Button: The ECO button is typically located on the left side of the car, labeled with the letters 'ECO.' Some buttons are green in color, making them easy to identify. In urban areas, especially during congested traffic conditions, strong power output is not necessary, and frequent stops and starts result in higher fuel consumption. Enabling ECO mode in such scenarios not only reduces fuel consumption but also enhances driving comfort. Situations Where ECO Mode is Unnecessary: There are a few situations where ECO mode is unnecessary: 1. When the car is driving at high speeds (up to 100km/h), even if ECO mode is turned on, the vehicle's computer will prioritize speed, causing the ECO mode to deactivate automatically. 2. When high torque output is required, such as when climbing hills, the engine computer will prioritize ensuring sufficient power to drive the vehicle, causing the ECO mode to deactivate automatically. Location of the ECO Button: The ECO button is typically located on the left side of the car, labeled with the letters 'ECO.' Some buttons are green in color, making them easy to identify.
20
3
Share

How many colors does the BYD F0 have?

BYD F0 comes in 7 colors, which are: Iceland Blue, France Red, Tianshan White, Brazil Yellow, Athens Silver, New Zealand Blue, and Deland Black, with an overall lively and bright color scheme. The BYD F0 is fashionable, comfortable, economical, fuel-efficient, and has good handling performance. Here is more information about the BYD F0: 1. The BYD F0 is a micro car, with very limited rear space and a compact, cute exterior design. The BYD F0 is equipped with a 1.0-liter naturally aspirated three-cylinder engine, which has a maximum power of 50 kW, a maximum torque of 90 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed of 4000 to 4500 rpm. This engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 2. The engine is paired with a 5-speed manual transmission or a 5-speed AMT transmission. The AMT transmission is a type of automatic transmission, also known as a mechanical automatic transmission. Its structure is similar to that of a manual transmission, but it includes an additional control mechanism that manages gear shifting and the engagement and disengagement of the clutch.
11
4
Share

What are the steps to turn off an automatic transmission car?

Here are the steps to turn off an automatic transmission car: 1. First, slow down the car and press the brake, then shift to N (Neutral) gear. 2. Pull the handbrake and release the foot brake. After the car comes to a complete stop, shift to P (Park) gear. 3. Turn off the ignition and remove the key to complete the shutdown. Below is additional information about the braking system of automatic transmission cars: 1. There are three components in an automatic transmission car that have braking functions: the foot brake, handbrake, and P (Park) gear. 2. On a slope, if the handbrake is not engaged and the foot brake is not pressed while the car is in N (Neutral) gear, the car may move (roll). 3. On a slope, if the car is in P (Park) gear without the handbrake engaged and the foot brake is released, the force of the car's movement will be on the P (Park) gear. This can damage the transmission and may cause the gear to lock.
11
3
Share

How Often Should the Air Conditioning Evaporator Be Cleaned?

It is recommended to clean it once a year. The air conditioning evaporator is located inside the dashboard. When the air conditioning is turned on, the evaporator performs heat exchange, causing a large amount of condensation to form on its surface. At the same time, outdoor air entering the system may carry dust, bacteria, and other impurities, which can adhere to the evaporator's surface along with the condensation. Here are the methods for cleaning the air conditioning evaporator: 1. Disassembly Cleaning: This method involves high labor costs and risks damaging air conditioning system components. Improper sealing during reassembly can lead to system malfunctions. Generally, this method is not recommended unless there is damage to the air conditioning system components that requires disassembly and replacement. 2. Traditional Foam Cleaner Cleaning: This method relies on foam dissolution and the airflow from the blower to remove dirt. Its drawback is the lack of targeted cleaning, and the water droplets from foam dissolution can damage electrical components like the blower resistor. 3. Visualized Evaporator Cleaning: This is a popular method in the market today. It allows for a clear view of the entire cleaning process and enables targeted dirt removal. Its advantages include thorough cleaning, comprehensive sterilization, and system antibacterial effects. Since specialized equipment is required, it is recommended that car owners visit professional cleaning shops for this service.
19
3
Share

How Many Months in Advance Can a Driver's License Be Renewed?

Driver's licenses can be renewed up to three months in advance. Driver's license renewal process: The motor vehicle driver should bring the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. The vehicle management office will process the renewal within one working day upon approval. Renewal materials: Bring two copies of ID card, two recent 1-inch color photos without hats, original ID card, original driver's license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office). In addition to applying for renewal at the vehicle management office, you can also apply for renewal through the following methods: Renewal via the "Traffic Management 12123" APP. Download the "Traffic Management 12123" APP, then select Service Center -- Expired License Renewal Service -- fill in the information. The new license is generally delivered by mail. Visit the "Police-Medical-Post" service point at a postal business hall for renewal. The entire process, from registration to medical examination to the production of the new license, takes only half an hour. Currently, only a few cities have opened this service, such as Hangzhou.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.