···
Log in / Register

What to do if the roof light of the Lavida stays on and cannot be turned off?

3 Answers
DonovanFitz
09/04/25 6:37am
First, open the rear door of the car and sit in the middle of the back seat. Look up, and you will find the switch for the roof light directly above the seat. The button generally has three modes: ON (always on), DOOR (on when the door is open and off when closed), and OFF (off). OFF means the light is turned off; selecting this mode will keep the roof light off and it will not illuminate.
Was this review help?
20
1
Share
McJulian
09/16/25 7:32am
I think there are quite a few reasons why the roof light of the Lavida won't turn off. Common ones include the door contact switch possibly not resetting, because if any door isn't fully closed or the switch is loose, the light might mistakenly stay on. There could also be a fault with the light switch itself, like a stuck button or poor contact. Wiring issues such as a short circuit or a blown fuse can also cause the light to malfunction. I've encountered similar situations before. You can check if all the doors are properly closed, try pressing the light switch a few times—sometimes contact issues can be fixed this way. If that doesn't work, it's best to check the fuse for the roof light in the fuse box and replace it if it's blown. However, if the circuitry is too complicated, it's not safe to DIY. It's better to go directly to a 4S shop and let the mechanics test it with their tools. They're familiar with Volkswagen's systems, and such minor issues can be fixed without spending much money, avoiding battery drain or affecting driving visibility.
Was this review help?
13
3
Share
Expand All
McIris
10/30/25 8:06am
Hey, the dome light staying on and not turning off is really annoying. I had the same issue with my Lavida. Don't worry too much though, it's usually a minor problem: First check if all doors are properly closed, including the trunk - even a small gap can keep the light on. Also check the light switch position. If it's a rotary knob, try turning it to reset. For automatic lights, sometimes the delay function glitches - restarting the engine after parking might fix it. By the way, cleaning the roof area helps too - dust getting stuck in switches is common. In my case, there was debris in the door hinge - wiping it with a damp cloth solved it. But DIY disassembly can cause more problems, so I recommend keeping a multimeter handy to test circuits. If it still doesn't work, take it to a professional mechanic right away. Keeping lights on too long can drain the battery. Make it a habit to check interior lights before long trips - it'll save you lots of hassle.
Was this review help?
15
2
Share
Expand All
More Forum Discussions

Automatic or Manual Transmission: Which is Easier to Drive?

Both have their advantages. Here are the details: 1. Fuel Consumption: Compared to automatic transmission cars, manual transmission cars are cheaper and more fuel-efficient. 2. Structure: The transmission structure of manual cars is relatively simple, making them easier and cheaper to manufacture and repair. Automatic transmissions, on the other hand, have a more complex structure, higher manufacturing costs, and greater difficulty and expense in repairs. However, in practical use, automatic transmissions require less human operation, resulting in a lower chance of failure. Generally, automatic transmissions only need regular oil changes, while manual transmissions require not only regular oil changes but also clutch plate replacements based on wear and tear.
11
1
Share

Is the RZ4E Isuzu Engine Imported?

Before 2000, the RZ4E Isuzu engine was imported, and you can identify an imported Isuzu engine by checking the vehicle configuration. Here are the specific details about the VIN (Vehicle Identification Number): 1. The first 3 characters: Represent the country of production, manufacturer, and vehicle type. 2. Characters 4-8: Indicate vehicle characteristics, such as vehicle category, body type, engine type, and gross vehicle weight rating. 3. The 9th character: Represents the check digit, used to verify the accuracy of the VIN. 4. The 10th character: Indicates the production year, showing when the vehicle was manufactured. 5. The 11th character: Represents the assembly location, with '0' indicating original factory assembly.
7
3
Share

What is the engine model of the Audi RS5?

The Audi RS5 is equipped with a 2.9T V6 twin-turbocharged engine. Here are the relevant details: 1. Compared to the previous 4.2L V8 engine, it is more powerful, with a maximum horsepower of 450 hp, maximum power output at 5700-6700 rpm, and a peak torque of 600 Nm available between 1900-5000 rpm. The official 0-100 km/h acceleration time is just 3.9 seconds, demonstrating exceptional performance. 2. The new Audi RS5 engine also features a spray-guided direct injection system and incorporates Otto-Atkinson cycle switching to further optimize fuel efficiency and power output efficiency. 3. The intercooler adopts a water-cooled structure, which provides more stable and effective temperature control compared to air-cooled intercoolers.
11
1
Share

When should the first maintenance for Honda Vezel be performed?

Honda Vezel's first maintenance should be performed when the vehicle reaches 5,000 kilometers. Below is the relevant information: 1. In addition to changing the engine oil and oil filter, the first maintenance involves many inspection items, such as a comprehensive check of the vehicle's lights, tires, chassis, various fluid levels in the engine compartment, and the onboard computer system. 2. The Vezel is the first SUV under GAC Honda, with dimensions of 4,294 mm in length, 1,772 mm in width, and 1,605 mm in height, and a wheelbase of 2,610 mm. In terms of appearance, the car features a wing-shaped front grille design with a mysterious and elegant black tone, LED headlights with dual-light design, combined with curved LED daytime running lights.
10
3
Share

Can You Continue Driving with a Faulty Wheel Speed Sensor?

You can continue driving with a faulty wheel speed sensor, but it is advisable to drive at a relatively slow speed to the nearest auto repair shop for maintenance or replacement. Below is some extended information about wheel speed sensors: 1. Function: The wheel speed sensor is used to detect wheel speed during the anti-lock braking process of a car. To ensure the normal operation of the ABS system and obtain vehicle operating parameters, a qualified wheel speed sensor is necessary. This system uses a wheel speed sensor detection device to convert signals through A/D conversion, plot curves, and determine whether the wheel speed sensor is qualified based on the data. 2. Impact of Damage: If the wheel speed sensor is faulty, the ABS warning light will illuminate. Additionally, you may experience unstable engine idle, reduced acceleration performance, momentary pauses or stalling when starting or decelerating to a stop while driving, and deviations in the speed displayed on the dashboard.
9
4
Share

What is the function of a car throttle valve?

The throttle valve has many functions, mainly including the following aspects: 1. Enhancing power through acceleration or deceleration; 2. Correcting the intake function through its self-regulation; 4. Controlling the operation of the engine assembly (the idle switch inside the engine is working); 5. Controlling the flap, through the operation of sensors, to regulate the intake volume for power enhancement. A dirty throttle valve is mostly caused by poor air quality and fuel quality. Carbon deposits generated during gasoline combustion, due to negative pressure, can contaminate the throttle valve, leading to poor closure, increased intake volume, signal transmission errors, excessive fuel consumption, and engine idle vibration. Therefore, during maintenance, it is essential to frequently check the throttle valve opening. If it exceeds the normal range, it should be cleaned.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.