What to do if the rearview mirror of Soueast DX7 does not fold properly?

1 Answers
Ria
07/29/25 7:19pm
Soueast DX7 rearview mirror does not fold properly and needs to be repaired at a 4S store. Additional information about rearview mirrors is as follows: 1. Function: The rearview mirror is a tool for the driver to directly obtain external information about the rear, side, and lower parts of the car while seated in the driver's seat. For the convenience of the driver's operation, to prevent traffic safety accidents, and to ensure personal safety, all countries stipulate that cars must be equipped with rearview mirrors, and all rearview mirrors must be adjustable in direction. 2. Issue: Rearview mirrors have a field of view issue, which refers to the range that the mirror surface can reflect. The industry has proposed three elements of the field of view: the distance between the driver's eyes and the rearview mirror; the size of the rearview mirror and the radius of curvature of the rearview mirror. There is a certain relationship between these three elements. When the distance and size of the rearview mirror are the same, the smaller the radius of curvature of the mirror surface, the larger the field of view reflected by the mirror surface. When the radius of curvature of the mirror surface is the same, the larger the size of the mirror surface, the larger the field of view reflected by the mirror surface.
Was this review help?
1
5
Share
More Forum Discussions

What are the reasons why side skirts cannot be repaired through metalworking?

Side skirts cannot be repaired through metalworking because the metal of the car side skirts is very hard, making the metalworking process extremely difficult. Car side skirts refer to the skirt panels installed on both sides of the vehicle body, and their functions include: 1. Reducing the reverse airflow generated during vehicle driving; 2. Enhancing operational stability at high speeds; 3. Preventing the vehicle from drifting when driving at high speeds. The impacts of rust on car side skirts: 1. The vehicle's appearance will be compromised; 2. The strength will decrease, leading to reduced defensive performance. Measures to prevent rust on car side skirts: 1. Try to park the car indoors; 2. Ensure the vehicle is parked in a dry environment; 3. Clean the gaps and sludge on the vehicle floor promptly.
15
2
Share

What is the reason for adding urea to a vehicle?

The reason for adding urea to a vehicle is: to meet emission standards, as adding urea can reduce carbon oxides in the exhaust and lower pollutant emissions. The effects of not adding urea to a vehicle include: 1. Exceeding emission standards, causing environmental pollution; 2. Chemicals in the vehicle's system may oxidize, leading to clogging of the urea nozzle and rendering the entire system inoperable; 3. Reduced vehicle power. The functions of urea are: to treat exhaust gases, reduce pollutants in the exhaust, and optimize engine performance and fuel consumption. The reasons for a urea warning light are: 1. Low urea pressure, high urea consumption; 2. Insufficient power, excessively high or low urea consumption; 3. Dashboard malfunction.
16
4
Share

How to Adjust the Time on a Honda 7th Generation Accord?

The method to adjust the time on a Honda 7th Generation Accord is as follows: 1. Locate and press the LOCK button on the audio control panel to enter the time adjustment interface; 2. Below buttons 4, 5, and 6 on the audio panel, you will find H, M, and S, which correspond to hours, minutes, and seconds. After adjusting the time correctly, press the LOCK button again to confirm. The Honda 7th Generation Accord is a mid-size sedan with the following dimensions: length 4960mm, width 1860mm, height 1480mm, wheelbase 2800mm, front track 1590mm, and rear track 1585mm. It is equipped with a 2.0L turbocharged engine producing a maximum horsepower of 156PS, maximum power of 115kW, maximum torque of 189Nm, and paired with a 5-speed automatic transmission.
20
5
Share

What is the issue with Nissan Sylphy's cylinder 4 misfire?

The possible causes of this fault vary depending on the vehicle model. Below are the specific reasons: Automatic transmission models: Automatic transmission models are less likely to experience stalling, whereas manual transmission models may stall frequently due to inexperienced driving. However, it is not impossible for automatic transmission vehicles to stall; the main reason is the use of low-quality fuel, which leads to engine carbon buildup and stalling. Manual transmission models: The primary cause is excessive dust in the air, leading to the accumulation of dirt on the idle air control valve and throttle body during engine operation.
3
1
Share

What Are the Reasons for Squeaky Brakes?

The reasons for squeaky brakes are: 1. Rust on the brake discs or brake pads; 2. The brake pads are new; 3. Excessive wear on the brake discs or brake pads; 4. The brake pads are installed incorrectly or are of the wrong model; 5. Use of low-quality or overly hard brake pads; 6. Abnormal brake caliper or lack of brake fluid; 7. Foreign objects between the brake drum or disc and the brake shoes. The solutions for squeaky brakes are: 1. Apply butter or special lubricant at the connection between the brake pads and the brake caliper; 2. Regularly inspect and replace the brake pads; 3. Regularly adjust the brakes; 4. Avoid frequent use of the brakes.
7
2
Share

What Causes Ice Formation in Truck Air Conditioning Pipes?

The reason for ice formation inside the pipes is the presence of air in the air conditioning system. Below is relevant information: 1. Low evaporation temperature: When the evaporation temperature is very low, moisture in the air can freeze, causing ice blockage in the air conditioning system. 2. Insufficient refrigerant: Ice can also form outside the air conditioning pipes when there is insufficient refrigerant. 3. Dirty or clogged evaporator: Ice formation in the pipes can also occur when the evaporator or return air filter is dirty or clogged. 4. Temperature imbalance: The refrigerant (in gaseous state) turns into liquid after passing through the compressor. During its transportation through the pipes (narrow pipes, liquid pipes), the vaporization process absorbs heat, lowering the temperature around the pipes and causing moisture in the air to condense and freeze, forming frost or ice when the temperature drops below 0°C. Adjusting the temperature too high or too low can lead to frost or ice formation. 5. Overly cold refrigerant returning to the compressor: The cause of frost formation on the thick pipe is excessively cold refrigerant returning to the compressor. This can happen due to too much refrigerant or too low indoor temperature, preventing the refrigerant from fully evaporating into gas in the indoor unit's evaporator before returning to the compressor. This results in frost on the thick pipe and liquid compression, which can damage the compressor over prolonged operation.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.