What to Do If the Rear Window Defroster Is Broken?

1 Answers
StSamantha
07/30/25 12:15am
The issue with the rear window defroster not working might be due to a broken heating wire in the rear windshield. Replacing the heating wire should resolve the problem. The primary function of the rear window defroster is to remove frost from the rear windshield. Its basic principle involves heating the glass through the electric heating wires embedded in the glass layers, raising the glass's temperature to evaporate fog and water droplets on the surface. Fogging on the windshield occurs when there is a significant temperature difference between the inside and outside of the car. If the outside temperature is lower than the inside temperature, the warm air inside the car condenses on the inner surface of the windshield, forming fog. Conversely, if the inside temperature is lower than the outside, water vapor in the atmosphere condenses on the outer surface of the windshield, creating fog.
Was this review help?
14
4
Share
More Forum Discussions

What are the hazards of PEA polyetheramine to engine oil?

PEA polyetheramine does not harm engine oil and does not contaminate it. While effectively controlling carbon deposits in the fuel system and intake system, PEA polyetheramine can significantly reduce carbon deposit formation in the combustion chamber. Polyetheramine, also known as amino-terminated polyether, is obtained through the amination reaction of polyether polyols. In addition to being used as a gasoline detergent, it can also be applied in industries such as epoxy resin curing agents, polyurea, anti-corrosion coatings, and adhesives, playing a very important role in the field of new materials. Due to the relatively high viscosity of PEA polyetheramine, it flows into the fuel tank at a slower rate. Therefore, it is necessary to patiently wait for it to completely flow into the tank before filling up with gasoline, which is equivalent to direct dilution with gasoline, preventing it from sticking to the tank walls. Polyetheramine can also be diluted with a solvent before being added to the fuel tank. The working principles of PEA polyetheramine in eliminating carbon deposits: Dispersion effect: In lubricating oil, it can adsorb small solid particles such as already formed carbon deposits and varnish, dispersing them into a colloidal solution state in the oil, preventing these substances from further aggregating into larger particles that adhere to mechanical parts or deposit as sludge. Dissolution effect: In fuel oil, it can improve the performance and quality of the oil, with excellent oil solubility, no precipitation or stratification, enabling gasoline and diesel fuels to burn more completely and fully in the cylinder, increasing vehicle power performance, enhancing fuel anti-knock properties, reducing vehicle wear, and lowering engine noise. Cleaning effect: Polyetheramine can wash off varnish and carbon deposits already adsorbed on component surfaces, dispersing and suspending them in the oil to be removed through the filter, thereby keeping the metal surfaces of engine pistons and other parts clean and functioning properly. Solubilization effect: Polyetheramine is also a type of amine surfactant, which can solubilize substances that are originally insoluble in oil, such as solids or liquids, into the center of micelles formed by the aggregation of multiple surfactant molecules. During use, it solubilizes oxygen-containing compounds (such as those with hydroxyl, carbonyl, or carboxyl groups), nitro compounds, water, etc., into the micelles to form colloids, preventing further oxidation and condensation, and reducing the formation and accumulation of harmful deposits on engine components. Acid neutralization effect: As an alkaline substance, polyetheramine can neutralize acids generated by the oxidation of lubricating oil, preventing further condensation, thereby reducing high molecular weight polymers. It also prevents these acidic substances from corroding engine components.
17
5
Share

How many days in advance can a motor vehicle undergo its annual inspection?

Motor vehicles can undergo their annual inspection up to 90 days in advance. Below is some information regarding motor vehicle annual inspections: 1. Legal basis: Article 32 of the 'Motor Vehicle Registration Regulations' stipulates that the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle's inspection validity period. 2. Consequences: Vehicles that fail to undergo the annual inspection on time and continue to be driven on the road will be fined 200 yuan and penalized with three demerit points. Additionally, the vehicle may be temporarily impounded. In severe cases, the driver's license may be revoked, and the vehicle along with its license plate may be detained until the annual inspection is passed before they can be reclaimed.
6
1
Share

How to adjust the car radio time?

Adjusting the car radio time is done as follows: 1. Long press the TIME button: Press and hold the TIME button, the hour will flash, then rotate the tuning knob to adjust. 2. Short press the TIME button: Briefly press the TIME button again, the minutes will flash, then rotate the tuning knob to adjust. 3. Confirm with TIME button: Finally, briefly press the TIME button to confirm. Below is an introduction to the radio function buttons: 1. POWER/VOL: Press to turn on/off, rotate to adjust volume. 2. TPK/MANU: MP3 track selection and browsing. 3. AST: Press and hold to automatically store radio stations. 4. RPT: Repeat play in CD/USB mode. 5. INT: Browse and play in CD/USB mode. 6. RDM: Random play in CD/USB mode.
15
4
Share

Should Refrigeration Oil Be Added from the Low Pressure or High Pressure Side?

Refrigeration oil should be added from the low-pressure side. A dedicated filling device injects it through the low-pressure line port. The functions of refrigeration oil are as follows: 1. Lubrication: Refrigeration oil lubricates the compressor during operation, reducing friction and wear, thereby extending the compressor's service life. 2. Sealing: It acts as a sealant in the compressor, ensuring tight seals between the piston and cylinder walls, as well as between rotating bearings, to prevent refrigerant leakage. 3. Cooling: While lubricating moving parts, refrigeration oil carries away heat generated during operation, maintaining lower temperatures for these components, thus improving compressor efficiency and operational reliability. 4. Energy Regulation: For refrigeration compressors equipped with energy regulation mechanisms, the oil pressure of refrigeration oil can serve as the driving force for the energy adjustment mechanism.
13
3
Share

How to Judge the Distance Between the Right Side of the Car and Obstacles?

Methods to judge the distance between the right side of the car and obstacles: 1. Height: Mainly estimated based on the comparison of the blocked height. 2. Distance from the roadside: Determine the position of the roadside in the windshield (the left wheel is 10-15cm to the right from the left pillar of the windshield; the right wheel is 5-10cm to the left from the center line of the windshield); the distance from the roadside can be seen from the rearview mirror. 3. Right wheel position: Determine the position of the right wheel (middle of the front of the car or right wiper): relative to the ground at one-third of the right side of the front cover. 4. Three-point alignment: When the eyes, the front edge of the car hood, and the point where the obstacle touches the ground are aligned, the obstacle is approximately 1.5 to 2 meters away from the front of the car.
5
5
Share

What does a sun exclamation mark on the dashboard mean?

On the dashboard, a sun exclamation mark is the brake pad warning light, indicating a brake pad fault, which serves as a reminder to replace the brake pads. When the front brake pads are nearing their wear limit, this warning will appear. It is recommended to check whether the brake pads need replacement. If the brake pads do not require replacement, adding some brake fluid may suffice. Before traveling, it is essential to inspect the braking system for normal operation, including the wear level of the brake pads. Additionally, ensure that the power steering fluid is sufficient. Special attention should be paid to the dust cover of the brake system's wheel cylinder. If this component is damaged and allows dust to enter, it can cause the piston to malfunction, leading to an increased braking distance when applying the brakes. If water enters this component, it can mix with the brake fluid, resulting in brake failure.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.