···
Log in / Register

What to Do If the Panoramic Sunroof Leaks?

5 Answers
VanJayce
07/23/2025, 09:07 AM

Solutions for panoramic sunroof leaks: 1. After maintenance, the sealing strip may shift and "lift up." You can use talcum powder for regular lubrication to reduce excess friction while maintaining sealing performance; 2. First tilt the rear part of the sunroof upward, then hold the switch for 1 minute without releasing. The sunroof will tilt up further and then close completely. Functions of a panoramic sunroof: 1. Opening the sunroof during traffic jams prevents exhaust fumes from entering the car; 2. Opening it after exposure to sun quickly lowers the interior temperature; 3. Opening it during high-speed driving reduces wind noise; 4. It helps quickly remove interior fog in cold weather.

Was this review help?
5
3
Share
GideonMarie
08/10/2025, 06:58 AM

I've encountered quite a few cases of panoramic sunroof leaks, mainly caused by three issues: clogged drainage holes, aging seals, or deformed sunroof frames. The drainage holes are located at the four corners of the sunroof, where leaves and debris can easily clog them. You can use thin wire or specialized tools to clear them, but remember to test the drainage with water afterward. The seals typically harden and crack after about five years of use. If they feel stiff to the touch, it's time to replace them; otherwise, water will seep in during rain. If the sunroof doesn't close tightly and leaves gaps, the frame might be deformed, requiring adjustment at a repair shop. For DIY fixes, start by clearing the drainage holes. If that doesn't help, consult a professional mechanic, as prolonged leaks can corrode the roof's electrical wiring, making repairs more complicated later on.

Was this review help?
3
5
Share
Expand All
DelBarrett
09/22/2025, 12:42 AM

Just helped my neighbor deal with a sunroof leak last week and found the drain tube completely clogged with mud. Actually, you can fix it yourself: first, wipe the sunroof tracks clean with a damp cloth, then use a syringe to inject water into the drain hole to check if it's clear. If it's clogged, use a bicycle brake cable to gently poke through, and finally, blow out the debris with an air gun. If the sealing strip is damaged, you can buy a new one on Taobao for just a few dozen yuan and replace it yourself—just make sure to align it properly and press it firmly into place. I recommend cleaning the drain holes every quarter, especially for cars often parked under trees. The worst case I've encountered was a detached drain tube connector, which required removing the headliner for repairs, costing several hundred in labor fees.

Was this review help?
13
5
Share
Expand All
DaisyLee
11/05/2025, 03:02 AM

Don't panic if your sunroof leaks, first identify the source. If water drips from the edges, it's likely due to failed sealing strips – temporarily use waterproof tape as an emergency fix. Wet spots on the headliner usually indicate clogged drainage holes; clean them immediately to prevent water accumulation and frame rust. Once, my car leaked because the sunroof glass was misaligned during assembly, causing improper closure – this requires returning to the 4S shop for track adjustment. Daily maintenance is crucial: avoid directing high-pressure car wash jets at sunroof seams, apply silicone oil monthly to preserve sealing strips, and park away from areas with heavy tree sap or bird droppings to extend sunroof lifespan.

Was this review help?
17
3
Share
Expand All
AliviaDella
12/26/2025, 04:50 AM

Systematic troubleshooting for water leakage: First step, test the drainage holes by pouring water to see if it exits under the car; second step, inspect the sealing strips with a flashlight for any cracks; third step, check if the sunroof closes evenly. Common causes are still drainage system issues, especially dislodged drain tube connectors. You can buy a bottle of sunroof unclogging and cleaning spray, apply it, and then use a thin, soft tube to clear the blockage. I always keep absorbent towels in my car to immediately soak up any leaks and prevent spreading. For prevention, choose original factory parts when modifying the sunroof, avoid damaging the sealing structure when installing roof racks, and remember to open the sunroof after rain to dry out the tracks.

Was this review help?
17
5
Share
Expand All
More Forum Discussions

How to set up the steering wheel buttons of Trumpchi GS5?

The method to set up the steering wheel buttons of Trumpchi GS5: The integrated function buttons on the left side of the steering wheel are mainly used to control the vehicle's audio system, while the buttons on the right side are primarily for controlling the cruise control. In the top-end model, which is equipped with ACC adaptive cruise control, the right side of the steering wheel can also control the ACC. The dimensions of the Trumpchi GS5 are 4695mm in length, 1885mm in width, and 1700mm in height, with a wheelbase of 2710mm. In terms of power, the Trumpchi GS5 is equipped with a 1.5-liter inline 4-cylinder turbocharged engine, available in high-power and low-power tuning options, paired with either a 6-speed manual or a 6-speed automatic transmission. The low-power version has a maximum power of 112 kW and a maximum torque of 235 Nm, while the high-power version has a maximum power of 124 kW and a maximum torque of 265 Nm.
15
2
Share

What are the reasons for the restricted reversing assist system in the BMW 325Li?

BMW 325Li reversing assist system restricted reasons are as follows: Camera obstruction: At night, it may cause the camera's view to be blocked, resulting in a "Driving Assist System Restricted" warning. If it's also raining, this situation is more likely to occur. Installing a hidden dashcam, especially a low-end model, may block the light-sensitive camera on the interior rearview mirror. Some installers may also forget to remove the sensor housing inside, leading to this issue. Additionally, a dashcam malfunction or battery drain may trigger the warning. Applying window film or a car wrap may also obstruct the camera's view, causing the warning. The solution is to replace the camera with a new one. Radar abnormality: The radar may be blocked by foreign objects like tree branches, or a license plate frame may obstruct the radar sensor circuit. Deformation of the radar mounting position or a loose radar requires recalibration. The solution is to recalibrate and reinstall the radar.
9
1
Share

Under what circumstances does a driver's license need to be re-learned?

Driver's license needs to be re-learned if it is revoked or canceled. The following situations will result in the revocation of a driver's license: 1. Driving an illegally modified vehicle or a vehicle that has been scrapped. 2. Being penalized more than twice within one year for drunk driving. 3. Driving at a speed exceeding 50% of the prescribed speed limit. 4. If a vehicle is lent to an unlicensed person (or someone whose driver's license has been revoked) and an accident occurs, not only will the driver be penalized, but the owner will also bear related responsibilities, and the driver's license will be revoked. Moreover, one must wait for two years before applying for a new license. 5. Lifetime driving ban for causing a major traffic accident while driving under the influence of alcohol or drunk driving, or fleeing after causing a major traffic accident. 6. Violating traffic regulations and causing a major traffic accident that constitutes a crime will result in the revocation of the driver's license. 7. Not displaying the vehicle license plate or using an expired temporary license plate.
14
2
Share

Can a newly purchased car be transferred the next day?

After completing the purchase procedures for a new car, it can be transferred the next day without any time restrictions. Here are some considerations for car transfer: 1. Check the certificate: Inspect the embossed number, engine number, and registration date on the certificate, and also check for any signs of alteration. 2. Check the original tax receipt: Be sure to check the original tax receipt for the vehicle purchase tax. Some cars may not have paid the purchase tax previously, and these unpaid or tax-exempt vehicles will be required to pay the purchase tax after the transfer. 3. Ensure complete documentation: The insurance transfer should be completed promptly along with the used car transfer procedures. 4. Understand the vehicle's condition: Vehicles that are mortgaged or under supervision are prohibited from being traded. Vehicle information can be checked through the vehicle management office.
5
3
Share

What is the correct parking sequence for one-button start?

The correct parking sequence for one-button start: 1. Press the brake pedal to bring the vehicle to a smooth stop, keeping the brake pedal depressed throughout the parking process; 2. Shift the gear to N (Neutral) and engage the handbrake; 3. Shift the gear to P (Park); 4. Release the foot brake and press the one-button start key to turn off the power, completing the parking process. The starting sequence for one-button start: 1. After sitting in the driver's seat, press the one-button start once to activate the ACC light, then press it again for vehicle self-check; 2. Depress the brake pedal and press the one-button start key to ignite and start the engine; 3. Keep the brake pedal depressed, shift to D (Drive), and release the handbrake; 4. Gradually release the foot brake, apply some throttle, and the starting process is complete.
18
2
Share

What is the minimum required net width and clearance height for a fire lane?

4.0 meters. Below are relevant details: 1. Fire Lane: A fire lane refers to a road designated for fire truck passage during emergencies. Regulations stipulate that the net width and clearance height of a fire lane must not be less than 4.0 meters, and parking is prohibited on fire lanes to prevent obstruction during fire incidents. 2. Design Requirements for Fire Lanes: (1) The net width and clearance height of a fire lane must not be less than 4.0 meters, and the slope of any open space designated for fire truck parking should not exceed 3%. (2) Circular fire lanes should have at least two connections with other lanes. (3) Dead-end fire lanes must include a turnaround or a turning area, with the turning area's size being no less than 12m x 12m. For high-rise buildings, it should preferably not be less than 15m x 15m; for large fire trucks, the turning area should not be less than 18m x 18m. (4) Any pipelines or concealed trenches on the fire lane must be capable of withstanding the pressure exerted by large fire trucks.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.