···
Log in / Register

What to do if the mileage for the first maintenance is not enough?

3 Answers
VonJessica
07/23/25 11:01pm
The mileage for the first maintenance is not enough. After the due date, you can apply for a deferred maintenance by explaining the condition of the car. Subsequent maintenance should be done every 5,000 kilometers. The most important part of car maintenance is changing the engine oil and oil filter. The most frequently checked parts during car maintenance are the tire surface and pressure, oil level, coolant level, and brake fluid level. Information about the first maintenance is as follows: 1. The first maintenance time has two indicators: mileage and time, whichever comes first. Exceeding either one will affect the warranty. 2. The first maintenance time is calculated based on the date of car delivery. 3. It is better to drive at high speeds after the first maintenance. Because driving at high speeds actually means increasing the engine speed, which increases mechanical wear. The first batch of engine oil contains the most metal debris and impurities. Using this oil with a large amount of debris for high-speed driving will greatly increase engine wear.
Was this review help?
18
5
Share
SanAdeline
09/23/25 7:05am
Don't panic if the first maintenance mileage is insufficient. In most cases, just follow the schedule. Last year, I only drove 4,000 km before my first service, but it had been six months. I immediately contacted the dealer, who understood and performed the service as planned. Engine oil and filters degrade over time, and internal parts age slowly even if the car isn't driven. Long-term low-mileage use can also lead to engine carbon buildup or battery depletion, so it's best not to delay. Visit a professional shop—they can conduct a thorough inspection and check other components like brake fluid or tires. This protects your car and ensures warranty validity, making it simple and efficient. From my experience, driving less is minor, but sticking to maintenance cycles is crucial. Don't wait until something goes wrong to regret it. Proactively ask the shop for details—they can help adjust the plan.
Was this review help?
14
4
Share
Expand All
LeBethany
11/07/25 2:33am
Encountering low mileage during the first maintenance is common, and the solution is simple: perform maintenance based on time. As an ordinary car owner, I understand that engine oil can oxidize, thicken when left unused, or cause engine corrosion due to moisture. Timely handling to remove production residues makes the car more durable. Consulting experts, they advise not to delay to prevent minor issues.
Was this review help?
17
4
Share
Expand All
More Forum Discussions

What is the lifespan of halogen headlights?

Halogen headlights typically have a lifespan of 2500 hours. Below is relevant information about halogen headlights: Definition: Halogen bulbs, simply called halogen bulbs or halogen lamps, also known as tungsten halogen bulbs or quartz bulbs, are a variant of incandescent lamps. Halogen lamps generally have lower brightness; for example, a 55W halogen lamp typically emits just over 1000 lumens. Working Principle: They operate based on the principle of thermal radiation and the emission of light from heated objects. The simplest incandescent lamp works by passing sufficient current through a filament, heating it to incandescence, which then emits light. However, the lifespan of such incandescent lamps is considerably short.
10
1
Share

Does a newly transferred vehicle need an annual inspection?

Generally, transferred vehicles have already undergone an annual inspection and do not require another one. Special circumstances and the annual inspection process are as follows: Special circumstances: Only when a motor vehicle whose inspection validity period has expired undergoes a transfer registration is it necessary to conduct an inspection and obtain a motor vehicle safety technical inspection certificate. Vehicles whose inspection validity period has not expired do not require an inspection during transfer registration. Annual inspection process: If the transfer is local, the vehicle management office will directly issue the license plate and driving license to the new owner and annotate relevant information in the motor vehicle registration certificate. If the transfer is to another region, the vehicle management office will issue a temporary license plate for the new region and seal the relevant procedures for the new owner to complete the registration in the new location. After completing the vehicle transfer procedures, the new owner must also transfer the purchase tax and insurance.
19
2
Share

When will the biannual vehicle inspection be abolished?

There is no definitive timeline for the abolition of vehicle annual inspections. Motor vehicles must undergo safety technical inspections according to the following schedule from the date of registration. Below is an introduction to the biannual vehicle inspection: Annual Inspection: The specific abolition time needs to be determined in accordance with relevant national regulations. Motor vehicles must undergo safety technical inspections within the prescribed period from the date of registration. Inspection Pass: Commercial motor vehicles that pass the safety technical inspection within the prescribed inspection period will not be subjected to repeated safety technical inspections. Vehicle annual inspections can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
5
0
Share

Which manufacturer produces the Camry?

Camry is a model under GAC Toyota. The latest Camry is equipped with the newest Toyota Safety Sense, including PCS pre-collision safety system, LDA lane departure alert system, AHB automatic high beam system, and DRCC dynamic radar cruise control system, providing safer driving assistance. Additionally, 12 different devices monitor the driving environment, such as BSM blind spot monitoring system, rear cross-traffic alert, and PVM panoramic view monitor. In terms of exterior features, the latest model comes standard with a panoramic sunroof, UV-reducing glass, noise-reducing windshield, aluminum alloy wheels, intelligent hidden wipers, power-folding exterior mirrors (with heating and power adjustment), and underbody air deflectors. Furthermore, LED headlights with high and low beams, LED daytime running lights, auto-leveling headlights, LED front fog lights, and LED combination taillights are available across all trims.
14
0
Share

What brand is the transmission of the Tiggo 8?

The transmission of the Tiggo 8 under Chery is the Aisin 6MT transmission. It offers excellent smoothness and accuracy, along with lower fuel consumption, which contributes to its high market share. The working principle involves the intermeshing of gears for power output. Compared to the traditional 5MT, the 6MT has an additional gear, making it more precise with more gears. This results in finer intermeshing spacing, leading to smoother gear shifts. In terms of power output control, the 6MT outperforms the 5MT, allowing for better engine power delivery and improved fuel efficiency at high speeds. The body parameters are as follows: Body dimensions: The Chery Tiggo 8 is positioned as a midsize SUV, with a length of 4700mm, width of 1860mm, height of 1746mm, and a wheelbase of 2710mm. Japanese Aisin is one of the world's largest independent transmission manufacturers. In fact, Aisin specializes in the production of automatic transmissions and was established in 1969. It is a subsidiary of Aisin Seiki Co., Ltd.
6
0
Share

What is the normal atmospheric pressure for tires?

Tire standard pressure: Standard tire pressure: 240 to 250kpa; Reinforced tire pressure: 280 to 290kpa; Maximum tire pressure: Should not exceed 350kpa. Details are as follows: Meaning of tire pressure: Tire pressure refers to the air pressure inside the tire. Tire pressure is the blood pressure of a car, and the level of tire pressure plays a crucial role in the performance and power of the vehicle. Impact of tire pressure: Tire pressure is an important factor affecting the service life and economy of tires. Improper selection of tire pressure can cause power cycle issues, leading to increased tire wear and reduced service life. Considering its impact on vehicle power, it is essential to choose the appropriate tire pressure to extend tire life and improve economy.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.