What to do if the Mazda 6 sunroof drain is clogged?

2 Answers
VanNatalie
07/29/25 6:28pm
The main cause of sunroof leakage is the blockage of the car sunroof drain holes by leaves, dirt, etc., and often the car wash staff do not clean them thoroughly. The rear drain holes of the car sunroof are generally quite hidden, usually located at the four corners of the sunroof. You can find a 6mm iron wire or other metal tool (usually blocked by dust and mud). Use the iron wire to poke open the drain hole, or combine it with tools like an air gun to blow air into the drain hole to clear the sunroof drainage pipe, then pour water over it.
Was this review help?
3
1
Share
JamesonDella
08/14/25 11:25am
As an ordinary car owner who often works on my own car, I find a clogged sunroof drain to be quite a nuisance. I've had this issue on my car before, mostly caused by accumulated leaves or dust. It's not too difficult to handle, but the key is to follow clear steps: First, park the car on level ground, then locate the small drain holes near the sunroof, usually at the corners of the roof. I usually use a thin wire to gently unclog it or blow compressed air from an air compressor through the inlet. After unclogging, test the flow with a thin hose by pouring water to check if it drains smoothly—the outlet is usually near the front wheels. If it's still clogged, you might need to clean the outlet area, which could be blocked by mud. Be careful not to damage the tubes during the process. After finishing, I recommend checking it annually to prevent future issues and avoid water leakage damaging the interior, which could cost you unnecessary repairs. Also, try to park away from trees to reduce the risk of debris buildup.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

How to Restore a Vehicle That Hasn't Been Inspected for 4 Years?

The owner of the motor vehicle should fill out an application form and submit the motor vehicle registration certificate, license plate, and vehicle license when selling the vehicle to a motor vehicle recycling company. When the original owner applies for the registration of a newly purchased motor vehicle, they can apply to the vehicle management office to use the original motor vehicle license plate number.
1
0
Share

How to Display the Total Mileage on a Volvo?

You can switch to the total odometer reading using the multifunction buttons on the steering wheel. Exit to the homepage, then select 'Trip' and scroll up/down to view instant fuel consumption, average fuel consumption, total mileage, etc.
1
1
Share

How to Deal with Water Under the Car Mat?

For plush mats or loop mats that get wet, simply air dry them by placing them in a high position under the sun. If water seeps into the stitching or sponge areas, it is essential to remove the mat first, check for any odors, wash it if it affects usability, and then proceed to air dry it.
11
3
Share

What to Do When the Trunk of an Old Passat Won't Open?

If you have been using the remote control to open the trunk lid, it might be due to dirt or rust in the lock cylinder. Spraying rust remover into the lock cylinder a few times should help open it. If you haven't used the remote key to unlock it, it can be difficult to open. Before attempting to open it, it's best to press the unlock button on the key or check if the key battery is dead.
1
2
Share

Where to Apply for an Operating License for Private Cars?

Go to the vehicle inspection station at the vehicle management office to inspect the vehicle and pre-record information. The applicant must submit the following materials: "Road Freight Transport Business Application Form"; identity proof of the responsible person, identity proof of the handling agent, and power of attorney materials. The management personnel will review the materials submitted by the applicant; make a decision to approve or disapprove.
7
2
Share

How to Reduce the Wiper Blade Stroke?

A flat-head screwdriver and two adjustable wrenches. Lift the wiper blade upward along the angle of the windshield for a short distance, then lift the wiper arm outward. Remove the wiper blade to prevent accidental damage during maintenance. Place a towel over the wiper arm to avoid scratching the paint during adjustment. Use one wrench to secure the bent end and gently twist the other wrench in different directions with the second wrench.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.