···
Log in / Register

What to Do If the License Renewal Expires?

5 Answers
McEsther
09/07/2025

If the renewal expires, the driver's license will be revoked. Renewal Period: Drivers should apply for a driver's license renewal and undergo a review within 90 days before the expiration of the current license. If the renewal is not completed within one year after the expiration date, the driver's license will be revoked. Requirements for Renewal and Review: Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck licenses must have no demerit points in the current scoring cycle, or holders of other license types must have fewer than 12 demerit points in the current scoring cycle. Holders of large passenger vehicle, tractor, city bus, medium passenger vehicle, or large truck licenses with demerit points in the current scoring cycle, or holders of other license types involved in a fatal traffic accident with equal or greater responsibility (without license revocation), must have completed the review education. The applicant must have no pending traffic violations or unresolved traffic accidents. The applicant's physical condition must meet the requirements for driving. The driver's license must not be seized, detained, suspended, revoked, canceled, or rescinded by law.

Was this review help?
19
2
Share
McPeter
09/19/2025

I almost went crazy when my driver's license renewal expired last time because I was too busy with work and completely forgot about it. It wasn't until I received a text message reminder that I realized it had been ten days overdue. I quickly checked the regulations and found that I could still renew it within three months after expiration, but I absolutely couldn't drive on the road anymore—otherwise, I could be fined hundreds of yuan and possibly get points deducted if caught by the police. I immediately booked an appointment at the DMV, brought my ID card and a few photos, and even prepared my medical report in advance to save time. During the renewal, I paid a 50-yuan service fee and got my new license in just two hours. I recommend friends to set a reminder on their phones or mark it on their birthday calendar to check the expiration date a month in advance. Safety first—don’t be as careless as I was and delay important matters.

Was this review help?
15
3
Share
Expand All
VonCorey
11/02/2025

Driving license renewal expired? I encountered the same situation last year. First, stop driving immediately - the risk is too high. In case of an accident, insurance may not cover it and your license could be suspended. Quickly open the Traffic Management 12123 APP to book an appointment at the vehicle management office, and complete the online form to schedule a time. Remember to bring your household registration or ID card, white-background photos, and a small processing fee (usually a few dozen yuan). When you get there, queue up to get a number - the replacement procedure is quite fast, typically completed in one morning. During the expired period, it's safest and most economical to take buses or taxis. While you're at it, check other documents for renewal to avoid future hassles. Pro tip: When getting your annual physical exam, casually check your license expiration date for easy prevention.

Was this review help?
7
5
Share
Expand All
MichaelMarie
12/16/2025

At my age, I've seen quite a few cases of expired driver's licenses. According to regulations, don't panic if your license renewal has expired—immediately contact the local DMV or online platforms to handle it. They can help you with the replacement, though there might be some additional fees. I recommend acting early to avoid stricter consequences. Remember, driving privileges come with responsibility—getting caught driving with an expired license not only means fines but also risks your reputation. My older brother forgot once and learned his lesson—he stuck his old license on the dashboard as a daily reminder of the expiration date. Safe driving requires attention to detail—don't be careless.

Was this review help?
2
0
Share
Expand All
JustinDella
02/05/2026

What to do if your driver's license renewal is overdue? I recommend using the traffic management APP for a one-click solution. Check the status on 12123, apply for a replacement, and schedule a medical exam – everything can be done online with super convenience. Don't delay after expiration to avoid getting fined by traffic cameras. Bring your materials to the DMV for on-site confirmation, usually done within an hour. For prevention, set phone alarms or WeChat reminders to ensure timely renewal next time. In this tech era, don't waste energy queuing up – handle it early for peace of mind.

Was this review help?
20
2
Share
Expand All
More Q&A Discussions

How Often Should Brake Discs and Brake Pads Be Replaced?

Under normal circumstances, brake discs should be replaced every 50,000 to 80,000 kilometers, front brake pads approximately every 30,000 kilometers, and rear brake pads around every 80,000 kilometers. Relevant information about the braking system is as follows: Introduction to Brake Discs: Simply put, a brake disc is a round disc that rotates as the vehicle moves. The brake caliper clamps the brake disc to generate braking force. When the brakes are applied, it clamps the disc to slow down or stop the vehicle. Brake discs provide effective braking performance and are easier to maintain compared to drum brakes. Introduction to the Braking System: Automobiles rely on the rotation of their wheels to move on the road. But how do they stop when needed? Drivers can't extend their feet to the ground like in cartoons to halt the vehicle. Instead, the car's braking system is used to reduce speed and bring the car to a stop. The braking system generates friction between the brake pads and the wheel drum or disc, converting the vehicle's kinetic energy into heat during the friction process. Key components of the braking system include the brake disc, brake pads, vacuum booster pump, master brake cylinder, and wheel brake cylinder.
7
2
Share

What Type of Transmission Oil is Used for Manual Transmissions?

Currently, the main types of transmission oil used include DEXRON, DEXRON-Ⅱ, and DEXRON-Ⅲ (produced by General Motors); ATF-F type oil (produced by Ford); and domestically developed No. 8 oil (primarily used in various passenger car hydraulic automatic transmission systems) and No. 6 oil (mainly used in the hydraulic torque converters of locomotives and heavy-duty trucks). Below is an introduction to transmission oil: 1. Transmission oil can clean the vehicle's gear-shifting system and also serves functions such as lubrication, heat dissipation, and sealing. It helps reduce wear and prolong the lifespan of the transmission components. 2. Manual transmission oil, also known as gear oil, is categorized into six grades from GL-1 to GL-6. Among these, GL-1 to GL-3 are more suited for heavy-duty applications but have been phased out of the market. Currently, GL-4 and GL-5 are commonly used in household vehicles. It is important to note that transmission oils should not be mixed, and manual transmissions must use manual transmission oil. 3. If the vehicle experiences issues such as difficulty shifting gears, jerky driving, lack of acceleration, or unusual noises from the transmission, the oil should be replaced promptly. 4. Generally, manual transmission oil should be replaced every 3 years or approximately 80,000 to 100,000 kilometers.
4
3
Share

Which country is Textar brake pads from?

Textar brake pads are from Germany. Textar Group is one of the largest friction material suppliers in Europe. All product development and technical support come from the Textar Group, and the same services are provided in the aftermarket. They are known for their high quality and safety, with no noise or vibration, excellent pedal feel, low wear, and long lifespan. The advantages of Textar brake pads include: 1. Excellent thermal conductivity and heat dissipation; 2. Improved friction stability with a stable friction coefficient; 3. Enhanced initial braking force at low temperatures and stable braking force at high temperatures; 4. Outstanding resistance to fade at high speeds and temperatures; 5. Reduced friction variation; 6. Superior noise and vibration resistance.
16
2
Share

What are the symptoms of a faulty manual fuel pump in a diesel vehicle?

The symptoms of a faulty manual fuel pump in a diesel vehicle include: 1. Abnormal fuel supply from the manual fuel pump, and in severe cases, it may fail to deliver fuel; 2. Reduced fuel supply from the manual fuel pump, mainly due to clogged pump filters or blocked fuel lines; 3. Poor air tightness of the manual fuel pump, caused by aging or damaged sealing gaskets at the connections or loose fuel pipe fittings; 4. The manual fuel pump does not operate smoothly. The manual fuel pump in a diesel vehicle consists of the pump body, rear seat, fuel tank, and handle. The pump body is the core of the manual fuel pump, mainly composed of high and low pressure working chambers, check valves, low pressure valves, pressure relief valves, and backflow valves. The handle's main function is to drive the plunger in a reciprocating motion, thereby increasing the pressure of the fuel to generate oil pressure. The check valve controls the pressure of the high-pressure valve, maintaining it at around 1.5MPa.
15
5
Share

How to Activate the Locking Sound on a Passat?

Method to activate the locking sound on a Passat: 1. Press the brake pedal and place the gear shift lever in P position; 2. Release the brake pedal and press the one-touch start button twice consecutively; 3. Close all four doors, then press and hold the lock button on the driver's door for more than 10 seconds to complete the activation. Taking the Volkswagen Passat 2021 280TSI Business Edition as an example: It is a mid-size car launched by SAIC Volkswagen, with a length, width, and height of 4933mm, 1836mm, and 1469mm respectively, and a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kw, and paired with a 7-speed dual-clutch transmission.
5
1
Share

What procedures are required to change from C2 to C1?

C2 to C1 driver's license upgrade method is as follows: Bring your ID card and C2 driver's license to the vehicle management office service hall to apply for the C1 upgrade business. Fill out the driver application form, pay the relevant examination fees, schedule the specific test dates after payment, and then take the corresponding tests. After passing all the tests, you can complete the upgrade from C2 to C1. Driver's license classifications: A1: Large buses and A3, B1, B2, C1, C2, C3, C4, M A2: Tractor trucks and B1, B2, C1, C2, C3, C4, M A3: City buses and C1, C2, C3, C4 B1: Medium buses and C1, C2, C3, C4, M (Medium buses refer to passenger vehicles with fewer than 19 seats, such as minibuses and vans) B2: Large trucks and C1, C2, C3, C4, M C1: Small cars and C2, C3 (Passenger vehicles with fewer than 9 seats, such as sedans, are considered small cars) C2: Small automatic transmission cars C3: Low-speed trucks and C4 C4: Three-wheeled cars C5: Small automatic transmission passenger cars for disabled people (referring to five types of disabilities: right lower limb disability, both lower limb disabilities, hearing impairment, right thumb missing, or finger end joint defects) D: Regular three-wheeled motorcycles and E E: Regular two-wheeled motorcycles and F F: Light motorcycles M: Wheeled self-propelled machinery N: Trolley buses P: Tramcars
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.